Abstract:Several investigations have been carried out by a number of researchers over the past few years to evaluate the utility of imaging gel dosimeters for the three-dimensional measurement of radiation fields. These have been proposed to be of particular value in mapping radiation dose distributions associated with emerging and complex approaches to cancer treatment such as conformal (CRT), intensity modulated (IMRT), "gamma knife," and pencil beam radiotherapies. Imaging of the gels has been successfully accomplished with clinical MRI units and via laser-based optical scanning. However, neither of these methods is generally accessible to all potential users, limiting the broader study and implementation of this valuable tool. We report here the design, methodology, and results of a preliminary study carried out to evaluate the utility of a new, inexpensive, and simplified approach to tomographic imaging of gel radiation dosimeters. For the purpose of this initial investigation, an array of liquid scintillation vials was prepared, containing a ferrous sulphate xylenol orange (FSX) gelatin formulation. The FSX formulation undergoes a change in optical absorption characteristics following irradiation, and the resulting color change can be observed visually. The vials were irradiated individually to different doses. Three-dimensional imaging was accomplished by tomographic reconstruction from two-dimensional optical images acquired using a diffuse, fluorescent light source, a digital charge-coupled device camera, single-photon-emission-computed tomography software, and other simple components designed by the authors. The resulting transverse images were evaluated through a region-of-interest (ROI) analysis to obtain the average change in image density in each vial as a function of radiation dose. These measured ROI values were subjected to a linear regression analysis to fit them to a straight line, and to determine the goodness of fit. Results from multiple imaging trials are compared. The correlation coefficients obtained are typically on the order of 0.98, and the p value from analysis of variance is approximately 0.05, indicating a linear and reproducible response for the dosimeter formulation and imaging system.

Investigation of the dose-response linearity of guar gum for gamma-ray dosimetry at radiation processing levels using Raman spectroscopy

Detection of Irradiated Granules Preparation of Chinese Patent Medicine by ESR Spectroscopy

The study of dosimetric properties of sulfanilic acid in low radiation dose range using the ESR technique

Preliminary Research on the Dose Response of Polymer Gel Dosimeter with Carbon Beam Irradiation

Evaluation of radiophotoluminescent glass dosimeter response for therapeutic spot scanning proton beam: suggestion of linear energy transfer‐based correction

Determination of dose-response calibration curves for gamma radiation using gamma-H2AX immunofluorescence based biodosimetry

Characterization of the chemical and structural modifications induced by X rays on the HEMA based polymer gel

Flat Ge-doped optical fibres for food irradiation dosimetry

Toward “on-line” X-ray computed tomography-based dosimetry using a new polymer gel with rapid response

Evaluation of dosimetric characteristics of a ternary nanocomposite based on High Density Polyethylene/Bismuth Oxide/Graphene Oxide for gamma-rays

EFFECTS OF GAMMA IRRADIATION ON ASPECTS OF MILLED RICE (ORYZA SATIVA) END-USE QUALITY

CCD imaging for optical tomography of gel radiation dosimeters

The investigation of dose rate and photon beam energy dependence of optimized PASSAG polymer gel dosimeter using magnetic resonance imaging

Comparison Of Alpha and X-ray Irradiation Effects in nMAG Polymer Gels Used for Dosimetry Applications

High spatial resolution dosimetry with uncertainty analysis using Raman micro-spectroscopy readout of radiochromic films

Characterization of ferrous-xylenol orange-polyvinyl alcohol gel for gamma dosimetry using spectroscopy

Studies of chemical bonds loss and optical modifications of CR-39 caused by gamma rays

The gamma radiation effect on the surface morphology and optical properties of alpha-methyl curcumin: PMMA film

Comparison of effects from gamma, e-beam and X-ray radiation on multilayer polymer films used in biopharmaceutical devices by chemometric treatment of spectroscopic data

Radiation Effects on Physically Cross-Linked Agarose Hydrogels

Optical characterization of Fricke-methylthymol blue hydrogel dosimeter with gellan gum as physical cross-linker