Abstract:We propose and numerically characterize the optical characteristics of a novel photonic crystal fiber (PCF) based surface plasmon resonance (SPR) sensor in the visible to near infrared (500-2000 nm) region for refractive index (RI) sensing. The finite element method (FEM) is used to design and study the influence of different geometric parameters on the sensing performance of the sensor. The chemically stable plasmonic material gold (Au) is used to produce excitation between the core and plasmonic mode. On a pure silica (SiO2) substrate, a rectangular structured core is used to facilitate the coupling strength between the core and the surface plasmon polariton (SPP) mode and thus improves the sensing performance. By tuning the geometric parameters, simulation results show a maximum wavelength sensitivity of 58000 nm/RIU (Refractive Index Unit) for the x polarization and 62000 nm/RIU for the y polarization for analyte refractive indices ranging from 1.33 to 1.43. Moreover, we characterize the amplitude sensitivity of the sensor that shows a maximum sensitivity of 1415 RIU-1 and 1293 RIU-1 for the x and y polarizations, respectively. To our knowledge, this is the highest sensitivity for an SPR in published literature, and facilitates future development of sensors for accurate and precise analyte measurement. The sensor also attains a maximum figure of merit (FOM) of 1140 and fine RI resolution of 1.6 × 10-6. Owing to strong coupling strength, high sensitivity, high FOM and improved sensing resolution, the proposed sensor is suited for real-time, inexpensive and accurate detection of biomedical and biological analytes, biomolecules, and organic chemicals.

Ultrasensitive plasmonic sensor based on MDM waveguide containing Persian Orsi window cavities for refractive index and blood plasma sensing

A Symmetrical Optical Waveguide Based Surface Plasmon Resonance Biosensing System

Metal-Insulator-Metal Plasmonic Sensor Utilizing Grating-Defect Waveguide and Cavities for Temperature Sensing and Biological Applications

Multi-resonance plasmonic refractive index sensor based on maze-shaped resonators for biological applications

Plasmonic Metal-Insulator-Metal (MIM) Refractive Index Sensor for Glucose Level Monitoring

An Ultra-Sensitive Visible-IR Range Fiber Based Plasmonic Refractive Index Sensor

Plasmon-Enhanced Refractive Index Sensing of Biomolecules Based on Metal-Dielectric-Metal Metasurface in the Infrared Regime

Dual-polarized highly sensitive plasmonic sensor in the visible to near-IR spectrum

Plasmonic D-Shaped Bimetallic Coating Refractive Index Sensor

Periodic stub implementation with plasmonic waveguide as a slow-wave coupled cavity for optical refractive index sensing

High-Property Refractive Index and Bio-Sensing Dual-Purpose Sensor Based on SPPs

Design and analysis of a high sensitivity open microchannel PCF-based surface plasmon resonance refractometric sensor

Numerical Investigations of a Near-Infrared Plasmonic Refractive Index Sensor with Extremely High Figure of Merit and Low Loss Based on the Hybrid Plasmonic Waveguide-Nanocavity System

Highly Sensitive Twin Resonance Coupling Refractive Index Sensor Based on Gold- and MgF2-Coated Nano Metal Films

Plasmonic Refractive Index Sensor with High Figure of Merit Based on Concentric-Rings Resonator

Highly Sensitive Plasmon Refractive Index Sensor Based on MIM Waveguide

Investigation of a high-sensitivity surface plasmon resonance sensor based on the eccentric core quasi D-shape photonic quasi-crystal fiber

Mid Infrared Optical Gas Sensor Using Plasmonic Mach-Zehnder Interferometer

Highly sensitive dual-side polished SPR PCF sensor for ultra-wide analyte range in the visible to near-IR operating band

A High Sensitivity Surface Plasmon Resonance Biosensor Based on Photonic Crystal Fibers for Refractive Index Sensing

Surface Plasmon Resonance Refractive Index Sensor Based on Ultraviolet Bleached Polymer Waveguide