Abstract:Enhanced geothermal system (EGS) is subject to the comprehensive effects of multiple physical fields during the long-term heat extraction process, including hydraulic (H), thermal (T), mechanical (M) and chemical (C) fields. The embedded discrete fracture model (EDFM) can effectively simulate the variations of flow, temperature, mechanical and concentration fields in fractured reservoirs. At present, however, the thermo-hydro-mechanical-chemical (THMC) coupling model based on EDFM is less researched. In this paper, the THMC coupling model of fractured reservoir is established based on EDFM by considering the changes in reservoir heterogeneity and physical properties as well as water–rock reactions. Then, the spatiotemporal evolution of flow, temperature, displacement and concentration fields in the operation process of EGS is simulated and analyzed. And the following research results are obtained. First, when the permeability of the basement rock is low, the production temperature decrease during exploitation is gradual, allowing EGS to maintain a high exploitation temperature for an extended period. However, lower permeability may result in a decrease in the quality flow rate from production wells, thereby affecting net heat extraction power. Second, when fracture permeability or fracture opening changes, EGS can output higher temperature stably for a certain period and then the temperature decreases at different amplitudes. When the fracture permeability increases to a certain value or the fracture opening decreases to a certain value, the influence of the change in fracture parameters on production temperature gets weak. Third, After 40 years of EGS operation, considering variable property fluids results in a 22 °C lower exploitation temperature compared to using constant property fluids, and considering water–rock reactions results in a 15 °C lower exploitation temperature, with a 12.5 % increase in reservoir average porosity. In conclusion, when researching a long-term operating EGS, it is necessary to comprehensively consider the influences of reservoir rock parameters, physical properties of injected fluid, water–rock reaction and other factors. And in the future, attention shall be paid to the two-way coupling of chemical reaction and mechanical deformation of other mineral compositions in the reservoir to the hydro-thermo-chemical field influence, so as to provide more accurate and reliable prediction for the engineering development and utilization of EGS reservoirs.

An Insight in Explaining the Stress Distribution in and around EGS

Investigation on the characteristics of hydraulic fracturing in fractured-subsequently-filled hot dry rock geothermal formation

Numerical Study on Damage Zones Induced by Excavation and Ventilation in a High-Temperature Tunnel at Depth

Investigation of Heat Extraction in an Enhanced Geothermal System Embedded with Fracture Networks Using the Thermal–Hydraulic–Mechanical Coupling Model

An Innovative Computational Approach for Modeling Thermo-hydro Processes within Enhanced Geothermal System

Poroelastic stress relaxation, slip stress transfer and friction weakening controlled post-injection seismicity at the Basel Enhanced Geothermal System

Rock damage evolution in the production process of the enhanced geothermal systems considering thermal-hydrological-mechanical and damage (THM-D)

Influence of complicated faults on the differentiation and accumulation of in-situ stress in deep rock mass

Direct numerical simulation of thermo-hydro-mechanical processes at Soultz-sous-Forêts

Permeability Evolution of Rough Fractures in Gonghe Granite Subjected to Cyclic Normal Stress at Elevated Temperatures: Experimental Measurements and Analytical Modeling

Close Observation of Hydraulic Fracturing at EGS Collab Experiment 1: Fracture Trajectory, Microseismic Interpretations, and the Role of Natural Fractures

Impact of fracture shear dilation on long-term heat extraction in Enhanced Geothermal Systems: Insights from a fully-coupled thermo-hydro-mechanical simulation

A global review of deep geothermal energy exploration: from a view of rock mechanics and engineering

Managing Induced Seismicity Risks From Enhanced Geothermal Systems: A Good Practice Guideline

Study on permeability evolution and damage mechanism along the EGS fracture in heat mining stage under thermal stress/cracking

A Bayesian Approach for In-Situ Stress Prediction and Uncertainty Quantification for Subsurface Engineering

About geomechanical safety for UGS activities in faulted reservoirs

Hydraulic stimulation strategies in enhanced geothermal systems (EGS): a review

Coupled Thermal–hydraulic–mechanical Model for an Enhanced Geothermal System and Numerical Analysis of Its Heat Mining Performance

Advances in enhanced geothermal systems: Integrating laboratory, numerical and field insights

Thermal‒hydraulic‒mechanical‒chemical Coupling Analysis of Enhanced Geothermal Systems Based on an Embedded Discrete Fracture Model