Abstract:Rapid Compression Machines (RCMs) are well-established facilities to validate kinetic models in the mid-to-low-temperature regime for moderate to high pressures. The wide range of measurable ignition delay times (IDTs) is a substantial extension to shock tubes and other facilities. However, the interpretation of RCM experiments is challenging and therefore the reliability of such measurements might be questioned. This study aims to prove the value of RCM experiments as validation targets. Firstly, a newly elaborated kinetic model for ethanol is validated against the widest experimental space performed for ethanol IDT experiments within a single facility, including six pressures between 10 and 40 bar, nine dilution ratios between fDil= 2–10 ( fDil=XDil / XO2 ) and seven equivalence ratios ranging from φ= 0.5 to 2.0 within a temperature range between 780 K and 980 K. The kinetic model resulting from the validation process is used to explore potential limitations in the experimental spectrum of the studied RCM. Therefore, modification of the facility towards unconventional operational conditions are used to prove the applicability of the adiabatic core hypothesis and therefore the legitimization of RCM experiments even under critical operational circumstances. These modifications include the variation of the compression characteristic from a distinct piston creep towards an almost abrupt stopping and the usage of different crevice geometries, including an uncreviced piston. Additionally, the influence of the initial temperature was investigated separately and the dead volume of the reactor was drastically decreased and also increased. This huge amount of experiments and corresponding simulations are a profound and reliable basis for statistical analysis to formulate meaningful statements about the validity of the comparison of kinetic simulation against RCM experiments. For the developed model, 93 % of all simulated IDTs are within ± 25 % of measured IDT between 5–150 ms. Novelty and significance statement This is the first study to experimentally prove the validity of RCM ignition delay time experiments for the broadest validation space and operational parameter space on ethanol within a single facility so far. Significant changes in the compression characteristic and the break-behavior of the piston system, the reactor piston crevice geometry, the reactor dead volume, and the initial temperature could show the direct effect of the measured ignition delay time but also the ability of a single kinetic model to cover these facility effects. Here, the special design of the HGD RCM allows the variation of all these parameters under otherwise similar boundary conditions and thus a direct experimental comparison, which makes this the first comprehensive study of the most essential facility-related effects in RCM experiments on the measured ignition delay time and their corresponding simulations.

A Rapid Compression Expansion Machine (RCEM) for studying chemical kinetics: Experimental principle and first applications

A Controlled Trajectory Rapid Compression and Expansion Machine (CT-RCEM) for Chemical Kinetic Investigations

Finding a common ground for RCM experiments. Part B: Benchmark study on ethanol ignition

A Rapid Compression Machine Coupled with Time-Resolved Molecular Beam Mass Spectrometry for Gas-Phase Kinetics Studies.

Finding a common ground for RCM experiments. Part A: On the influences of facility effects regarding the reliability of experimental validations

A pneumatic piston-released rapid compression machine for chemical kinetics studies at elevated pressure and low to intermediate temperatures

UConnRCMPy: Python-based data analysis for rapid compression machines

Promoting “adiabatic Core” Approximation in a Rapid Compression Machine by an Optimized Creviced Piston Design

Measurement of Reaction Rate Constants Using RCM: A Case Study of Decomposition of Dimethyl Carbonate to Dimethyl Ether

Reaction propagation, leading to developing detonation, in a rapid compression machine

Dual Fuel Reaction Mechanism 2.0 including NOx Formation and Laminar Flame Speed Calculations Using Methane/Propane/n-Heptane Fuel Blends

Material Characterization Using a Tandem Micro-Reactor – GC–MS

A Rapid Compression Machine Study of Autoignition, Spark-Ignition and Flame Propagation Characteristics of H2/CH4/CO/air Mixtures

Numerical Study Toward Fast Intermediate Species Sampling with High Accuracy in a Rapid Compression Machine

On the uncertainty of temperature estimation in a rapid compression machine

Autoignition of CRC Diesel Surrogates at Low Temperature Combustion Conditions: Rapid Compression Machine Experiments and Modeling

Optical spray investigation and numerical spray model calibration for the RCCI combustion mode with ethanol/CNG and diesel fuel

An atmospheric pressure high-temperature laminar flow reactor for investigation of combustion and related gas phase reaction systems

Automatic Extension of a Semi-Detailed Synthetic Fuel Reaction Mechanism

Equilibrium Driven Ring Expansion Metathesis Polymerization via Tunable Chain Transfer Processes

Shock Wave and Flame Front Induced Detonation in a Rapid Compression Machine