Abstract:Standard signal processing approaches for scintillation detectors in positron emission tomography (PET) derive accurate estimates for 511 keV photon time of interaction and energy imparted to the detection media from aggregate characteristics of electronic pulse shapes. The ultimate realization of a scintillation detector for PET is one that provides a unique timestamp and position for each detected scintillation photon. Detectors with these capabilities enable advanced concepts for three-dimensional (3D) position and time of interaction estimation with methods that exploit the spatiotemporal arrival time kinetics of individual scintillation photons. In this work, we show that taking into consideration the temporal photon emission density of a scintillator, the channel density of an analog silicon photomultiplier (SiPM) array, and employing fast electronic readout with digital signal processing, a detector that counts and timestamps scintillation photons can be realized. To demonstrate this approach, a prototype detector was constructed, comprising multichannel electronic readout for a bismuth germanate (BGO) scintillator coupled to an SiPM array. In proof-of-concept measurements, we were able to count and provide unique timestamps for 66% of all optical photons, where the remaining 34% (two-or-more-photon pulses) are also independently counted, but each photon bunch shares a common timestamp. We show this detector concept can implement 3D positioning of 511 keV photon interactions and thereby enable corrections for time of interaction estimators. The detector achieved 17.6% energy resolution at 511 keV and 237±10 ps full-width-at-half-maximum (FWHM) coincidence time resolution (CTR) (fast spectral component) versus a reference detector. We outline the methodology, readout, and approach for achieving this detector capability in first-ever, proof-of-concept measurements for scintillation photon counting detector with analog silicon photomultipliers. The presented detector concept is a promising design for large area, high sensitivity TOF-PET detector modules that can implement advanced event positioning and time of interaction estimators, which could push state-of-the-art performance.

OptoTracker project proposal

Development of scintillating fiber detector technology for high rate particle tracking

Demonstration of particle tracking with scintillating fibres read out by a SPAD array sensor and application as a neutrino active target

Riptide: a proton-recoil track imaging detector for fast neutrons

Scintillator-SiPM Detector for Tracking and Energy Deposition Measurements

Advances in heterostructured scintillators: toward a new generation of detectors for TOF-PET

Design of a new tracking device for on-line dose monitor in ion therapy

Silicon photomultiplier arrays - a novel photon detector for a high resolution tracker produced at FBK-irst, Italy

Scintillation and Cherenkov photon counting detectors with analog silicon photomultipliers for TOF-PET

A fully active fine grained detector with three readout views

4-Dimensional Tracking with Ultra-Fast Silicon Detectors

RIPTIDE: a novel recoil-proton track imaging detector for fast neutrons

A 1 mm Scintillating Fibre Tracker Readout by a Multi-anode Photomultiplier

A proton-recoil track imaging system for fast neutrons: the RIPTIDE detector

Topological track reconstruction in unsegmented, large-volume liquid scintillator detectors

New perspectives for neutron imaging through advanced event-mode data acquisition

Scintillating fiber near detector for the Neutrino Factory

Directional-sensitive wide field-of-view monitoring of high-intensity proton beams by spectral tracking of scattered particles with scattering foil and miniaturized radiation camera

Charged Particle Tracking in Real-Time Using a Full-Mesh Data Delivery Architecture and Associative Memory Techniques