Abstract:In order to meet the increasing requirements of synchrotron radiation users, a new plan of VUV and soft X-ray light source, named Hefei Advanced Light Source (HALS), is brought forward by National Synchrotron Radiation Laboratory (NSRL). This 1.5GeV storage ring with ultra low emittance 0.2nmrad consists of 18 combined FBA cells and the circumference is 388m. Strong enough quadrupoles and sextupoles must be needed for getting such low emittance lattice, which will lead beam close orbit distortions’ (COD) sensitivity to the field and alignment errors in magnets. Estimation of the COD from various error sources is investigated. Using orbit response matrix and singular value decomposition method, the distribution of beam position monitors and the location of correctors are reported in the paper. Simulation proves that COD can be corrected down to 60 microns level. In the same time the corrector strengths are weaker enough in the correction scheme. INTRODUCTION Hefei Light Source (HLS) of National Synchrotron Radiation Laboratory is a dedicated second generation light source. In order to obtained synchrotron radiation with high brightness and better coherence in the VUV and soft X-ray range for users, A plane of building a new machine named HALS storage ring has been brought forward [1]. In the preliminary design, considering the required low emittance, the straight lines’ number and length, A FBA lattice structure with 18 super-periods has been chosen for HALS. Figure 1 shows the and dispersion functions of one cell, from which we can see there is no dispersion in straight sections. Main parameters about HALS storage ring can be founded in table1 [2]. In the design, strong quadrupoles and sextupoles have been used because of the low emittance lattice structure. The magnet alignment errors will lead to larger closed orbit distortion (COD), which can induce unwanted side effects. The non-linear effect can make the dynamic aperture and beam lifetime decreasing. Furthermore, it will change the synchrotron light’s position at the beamline front ends, which can influence the brightness at experiment station. In order to correct the COD, Beam Position Monitors (BPMs) and correctors must be installed. In the paper, COD is estimated considering alignment errors in magnets and girders. Magnets field errors are also included. Using SVD method, the closed orbit distortions are corrected. In the same time, corrector strengths and residual closed orbit distortions are obtained. Figure 1: and dispersion functions of one cell. Table 1: Main Parameters of HALS Storage Ring

Orbit Error Correction on the High Energy Beam Transport Line at the KHIMA Accelerator System

Start-to-end Simulations for Beam Dynamics in the Injector System of the KHIMA Heavy Ion Accelerator

The Errors Study on a Recent Heps Low-Beta Design

IH-DTL design with KONUS beam dynamics for KHIMA project

Closed orbit correction of hefei advanced light source (hals) storage ring*

Angular correction methodology and characterization of a high-resolution CMOS array for patient specific quality assurance on a robotic arm linac

Layout Optimization Of Corrector Magnets For A Proton Therapy Beamline Via Genetic Algorithm

Error analysis study for electron linear accelerator optimized using multi-objective genetic algorithm

MATLAB Based Beam Orbit Correction System of HLS Storage Ring

Electron Beam Therapy Mode Analysis of Medical Linac by BEAM Code

Effect of error of kicker magnets on injection process

ERROR ANALYSIS AND CORRECTION SCHEME IN C-ADS INJECTOR-I*

Influence of Fringing Field and Second-Order Aberrations on Proton Therapy Gantry Beamline

Beam dynamics design and error study of the coupled structure with ladder RFQ and IH-DTL

Beam optical design for high energy electron radiography experiment study based on THU LINAC

Design of Gantry Beamline for HUST Proton Therapy Facility

A robust smoothing analysis strategy for improving particle accelerator alignment and installation accuracy and efficiency based on HALF design

Optimization of the Multi-turn Injection Efficiency for Medical Synchrotron

Closed orbit correction of hefei light source(HLS) upgrading storage ring

Beam Dynamic Design and Study of a Linac with Variable Output Energy for an AB-BNCT Facility

Magnetic Field Optimization and Tolerance Study of a Medical Superconducting Cyclotron