Abstract:Three-dimensional (3D) superconducting microwave cavities with large mode volumes typically have high quality factors ($>10^6$). This is due to a reduced sensitivity to surface dielectric losses, which is the limiting source of dissipation in two-dimensional transmission line resonators. In recent years, 3D microwave cavities have been extensively used for coupling and interacting with superconducting quantum bits (qubits), providing a versatile platform for quantum information processing and hybrid quantum systems. A current issue that has arisen is that 3D superconducting cavities do not permit magnetic field control of qubits embedded in these cavities. In contrast, microwave cavities made of normal metals can be transparent to magnetic fields, but experience a much lower quality factor ($\sim 10^4$), which negates many of the advantages of the 3D architecture. In an attempt to create a device that bridges a gap between these two types of cavities, having magnetic field control and high quality factor, we have created a hybrid 3D cavity. This new cavity is primarily composed of aluminium but also contains a small copper insert. We measured the internal quality factor of the hybrid cavity to be $102000$, which is an order of magnitude improvement over all previously tested copper cavities. An added benefit to that our hybrid cavity possesses is that it also provides an improved thermal link to the sample that superconducting cavities alone cannot provide. In order to demonstrate precise magnetic control within the cavity, we performed spectroscopy of three superconducting qubits placed in the cavity, where individual control of each qubit's frequency was exerted with small wire coils attached to the cavity. A large improvement in quality factor and magnetic field control makes this 3D hybrid cavity an attractive new platform for circuit quantum electrodynamics experiments.

What problem does this paper attempt to address?

This paper aims to solve the problem that the qubits embedded in a 3D superconducting microwave cavity cannot be controlled by an external magnetic field. Traditionally, 3D superconducting microwave cavities are widely used for coupling and interacting with superconducting qubits because of their high quality factor (Quality Factor, $Q$). However, the walls of these cavities completely shield the internal area from the influence of the external magnetic field, which limits the ability to control the quantum circuit through the external magnetic field. On the other hand, although microwave cavities made of normal metals (such as copper) can penetrate the magnetic field, their quality factor is low (about $10^4$), thus losing many advantages of the 3D architecture. To overcome this problem, the researchers designed a hybrid 3D cavity, which is mainly made of aluminum but contains a small copper insert. This design not only increases the quality factor of the cavity to 102,000, which is about an order of magnitude higher than all the pure copper cavities tested before, but also provides an improved thermal link, which cannot be provided by a single superconducting cavity. In addition, through a small coil attached to the cavity, the researchers were able to achieve individual control of the frequencies of three superconducting qubits placed inside the cavity, demonstrating precise magnetic field control ability. These improvements make this 3D hybrid cavity a new and attractive platform for quantum electrodynamics experiments.

3D microwave cavity with magnetic flux control and enhanced quality factor

Applying Electric and Magnetic Field Bias in a 3D Superconducting Waveguide Cavity with High Quality Factor

Cavity Quantum Electrodynamics with Ferromagnetic Magnons in a Small Yttrium-Iron-garnet Sphere

Strategies and trade-offs for controllability and memory time of ultra-high-quality microwave cavities in circuit QED

Superconducting microwave cavities and qubits for quantum information systems

High Quality 3-Dimensional Aluminum Microwave Cavities

Reaching 10 Ms Single Photon Lifetimes for Superconducting Aluminum Cavities

Advancements in Superconducting Microwave Cavities and Qubits for Quantum Information Systems

Coherent Coupling in a Driven Qubit-Magnon Hybrid Quantum System

Measuring the Quality Factor of a Microwave Cavity Using Superconducting Qubit Devices

High coherence superconducting microwave cavities with indium bump bonding

Enhancing the Q-Factor of a Practical Qubit Niobium Three-Dimensional λ/4-Resonator Through Surface Treatment

Measurement of high quality factor superconducting cavities in tesla-scale magnetic fields for dark matter searches

Demonstration of superconducting micromachined cavities

First prototype of a biaxially textured YBa$_{2}$Cu$_{3}$O$_{7-x}$ microwave cavity in a high magnetic field for dark matter axion search

Copper waveguide cavities with reduced surface loss for coupling to superconducting qubits

Cryogenic Microwave Filter Cavity with a Tunability Greater than 5 GHz

Gate-Compatible Circuit QED in a Three-Dimensional Cavity Architecture

Exploration of superconducting multi-mode cavity architectures for quantum computing

Multi-metallic conduction cooled superconducting radio-frequency cavity with high thermal stability

A superconducting on-chip microwave cavity for tunable hybrid systems with optically trapped Rydberg atoms