Self-shrinking Platonic solids

Daniel Ketover

DOI: https://doi.org/10.48550/arXiv.1602.07271

2016-02-24

Abstract:We construct new embedded self-shrinkers of genus 3, 5, 7, 11 and 19 using variational methods. Our self-shrinkers resemble doublings of the Platonic solids and were discovered numerically by D. Chopp in 1994.

Differential Geometry,Analysis of PDEs

What problem does this paper attempt to address?

Self-shrinkers whose asymptotic cones fatten

Daniel Ketover

2024-07-01

Abstract:For each positive integer $g$ we use variational methods to construct a genus $g$ self-shrinker $\Sigma_g$ in $\mathbb{R}^3$ with entropy less than $2$ and prismatic symmetry group $\mathbb{D}_{g+1}\times\mathbb{Z}_2$. For $g$ sufficiently large, the self-shrinker $\Sigma_g$ has two graphical asymptotically conical ends and the sequence $\Sigma_g$ converges on compact subsets to a plane with multiplicity two as $g\to\infty$. Angenent-Chopp-Ilmanen conjectured the existence of such self-shrinkers in 1995 based on numerical experiments. Using these surfaces as initial conditions for large $g$, we obtain examples of mean curvature flows in $\mathbb{R}^3$ with smooth initial non-compact data that evolve non-uniquely after their first singular time.

Differential Geometry
Faces of platonic solids in all dimensions

Marzena Szajewska

DOI: https://doi.org/10.1107/S205327331400638X

2012-04-06

Abstract:This paper considers Platonic solids/polytopes in the real Euclidean space R^n of dimension 3 <= n < infinity. The Platonic solids/polytopes are described together with their faces of dimensions 0 <= d <= n-1. Dual pairs of Platonic polytopes are considered in parallel. The underlying finite Coxeter groups are those of simple Lie algebras of types An, Bn, Cn, F4 and of non-crystallographic Coxeter groups H3, H4. Our method consists in recursively decorating the appropriate Coxeter-Dynkin diagram. Each recursion step provides the essential information about faces of a specific dimension. If, at each recursion step, all of the faces are in the same Coxeter group orbit, i.e. are identical, the solid is called Platonic.

Metric Geometry
The Platonic solids and fundamental tests of quantum mechanics

Armin Tavakoli,Nicolas Gisin

DOI: https://doi.org/10.22331/q-2020-07-09-293

2020-06-04

Abstract:The Platonic solids is the name traditionally given to the five regular convex polyhedra, namely the tetradron, the octahedron, the cube, the icosahedron and the dodecahedron. Perhaps strongly boosted by the towering historical influence of their namesake, these beautiful solids have, in well over two millenia, transcended traditional boundaries and entered the stage in a range of disciplines. Examples include natural philosophy and mathematics from classical antiquity, scientific modeling during the days of the european scientific revolution and visual arts ranging from the renaissance to modernity. Motivated by mathematical beauty and a rich history, we consider the Platonic solids in the context of modern quantum mechanics. Specifically, we construct Bell inequalities whose maximal violations are achieved with measurements pointing to the vertices of the Platonic solids. These Platonic Bell inequalities are constructed only by inspecting the visible symmetries of the Platonic solids. We also construct Bell inequalities for more general polyhedra and find a Bell inequality that is more robust to noise than the celebrated Clauser-Horne-Shimony-Holt Bell inequality. Finally, we elaborate on the tension between mathematical beauty, which was our initial motivation, and experimental friendliness, which is necessary in all empirical sciences.

Quantum Physics,History and Philosophy of Physics,Popular Physics
A Woven Klein Quartic

Chaim Goodman-Strauss

2024-03-05

Abstract:We describe a new method of weaving a model of the Klein quartic, a highly symmetric, but abstract genus-3 surface akin to a platonic polyhedron, with negatively-curved geometry. The Klein quartic cannot be realized in its fully symmetric form in three-dimensional space, but this model exhibits the most rigid symmetry that is possible. With remarkably little time and material you can have a Klein quartic of your own!

Combinatorics
Vietoris-Rips complexes of Platonic solids

Nada Saleh,Thomas Titz Mite,Stefan Witzel

DOI: https://doi.org/10.2140/iig.2024.21.17

2023-02-28

Abstract:We determine the homotopy type of the Vietoris-Rips complexes of the (vertex sets of the) platonic solids. The most interesting case is that the Vietoris-Rips complex of the dodecahedron is a wedge of nine 3-spheres when the parameter is between combinatorial distance 3 and 4.

Algebraic Topology,Combinatorics
Arbitrarily Large Neighborly Families of Congruent Symmetric Convex 3-Polytopes

Jeff Erickson

DOI: https://doi.org/10.48550/arXiv.math/0106095

2001-06-13

Abstract:We construct, for any positive integer n, a family of n congruent convex polyhedra in R^3, such that every pair intersects in a common facet. Previously, the largest such family contained only eight polytopes. Our polyhedra are Voronoi regions of evenly distributed points on the helix (t, cos t, sin t). With a simple modification, we can ensure that each polyhedron in the family has a point, a line, and a plane of symmetry. We also generalize our construction to higher dimensions and introduce a new family of cyclic polytopes.

Combinatorics,Metric Geometry
Rationalizing Euclidean Assemblies of Hard Polyhedra from Tessellations in Curved Space

Philipp W.A. Schönhöfer,Kai Sun,Xiaoming Mao,Sharon C. Glotzer

2023-05-13

Abstract:Entropic self-assembly is governed by the shape of the constituent particles, yet a priori prediction of crystal structures from particle shape alone is non-trivial for anything but the simplest of space-filling shapes. At the same time, most polyhedra are not space-filling due to geometric constraints, but these constraints can be relaxed or even eliminated by sufficiently curving space. We show using Monte Carlo simulations that the majority of hard Platonic shapes self-assemble entropically into space-filling crystals when constrained to the surface volume of a 3-sphere. As we gradually decrease curvature to "flatten" space and compare the local morphologies of crystals assembling in curved and flat space, we show that the Euclidean assemblies can be categorized either as remnants of tessellations in curved space (tetrahedra and dodecahedra) or non-tessellation-based assemblies caused by large-scale geometric frustration (octahedra and icosahedra).

Soft Condensed Matter
Two-Dimensional Self-Trapping Structures in Three-Dimensional Space

Manturov, V. O.,Kanel-Belov, A. Ya.,Nilov, F. K.

DOI: https://doi.org/10.1134/s1064562424701837

2024-04-19

Doklady Mathematics

Abstract:It is known that a finite set of convex figures on the plane with disjoint interiors has at least one outermost figure, i.e., one that can be continuously moved "to infinity" (outside a large circle containing the other figures), while the other figures are left stationary and their interiors are not crossed during the movement. It has been discovered that, in three-dimensional space, there exists a phenomenon of self-trapping structures. A self-trapping structure is a finite (or infinite) set of convex bodies with non-intersecting interiors, such that if all but one body are fixed, that body cannot be "carried to infinity." Since ancient times, existing structures have been based on the consideration of layers made of cubes, tetrahedra, and octahedra, as well as their variations. In this work, we consider a fundamentally new phenomenon of two-dimensional self-trapping structures: a set of two-dimensional polygons in three-dimensional space, where each polygonal tile cannot be carried to infinity. Thin tiles are used to assemble self-trapping decahedra, from which second-order structures are then formed. In particular, a construction of a column composed of decahedra is presented, which is stable when we fix two outermost decahedra, rather than the entire boundary of the layer, as in previously investigated structures.

mathematics
The Marriage of Sierpiński Triangles and Platonic Polyhedra

Jun Wang,Zhilong Jiang,Weiya Liu,Zihao Wu,Rui Miao,Fan Fu,Jia-Fu Yin,Bangtang Chen,Qiangqiang Dong,He Zhao,Kaixiu Li,Guotao Wang,Die Liu,Panchao Yin,Yiming Li,Mingzhao Chen,Pingshan Wang

DOI: https://doi.org/10.1002/anie.202214237

2022-01-01

Angewandte Chemie

Abstract:Fractal structures with self-similarity are of fundamental importance in the fields of aesthetic, chemistry and mathematics. Here, by taking advantage of constructs the rational geometry-directed precursor design, we report the construction of two fascinating Platonic solids, the Sierpiński tetrahedron ST-T and the Sierpiński octahedron ST-O, in which each possesses a fractal Sierpiński triangle on their independent faces. These two discrete complexes are formed in near-quantitative yield from the multi-component self-assembly of truncated Sierpiński triangular kernel L1 with tribenzotriquinacene-based hexatopic and anthracene-based tetratopic terpyridine ligands (L3 and L4 ) in the presence of metal ions, respectively. The enhanced stabilities of the 3D discrete structures were investigated by gradient tandem mass spectrometry (gMS2 ). This work provides new constructs for the imitation of complex virus assemblies and for the molecular encapsulation of giant guest molecules.
Noncompact self-shrinkers for mean curvature flow with arbitrary genus

Reto Buzano,Huy The Nguyen,Mario B. Schulz

DOI: https://doi.org/10.1515/crelle-2024-0073

2024-09-05

Abstract:In his lecture notes on mean curvature flow, Ilmanen conjectured the existence of noncompact self-shrinkers with arbitrary genus. Here, we employ min-max techniques to give a rigorous existence proof for these surfaces. Conjecturally, the self-shrinkers that we obtain have precisely one (asymptotically conical) end. We confirm this for large genus via a precise analysis of the limiting object of sequences of such self-shrinkers for which the genus tends to infinity. Finally, we provide numerical evidence for a further family of noncompact self-shrinkers with odd genus and two asymptotically conical ends.

Differential Geometry
Smooth compactness of self-shrinkers

Tobias H. Colding,William P. Minicozzi II

DOI: https://doi.org/10.48550/arXiv.0907.2594

2009-07-15

Abstract:We prove a smooth compactness theorem for the space of embedded self-shrinkers in $\RR^3$. Since self-shrinkers model singularities in mean curvature flow, this theorem can be thought of as a compactness result for the space of all singularities and it plays an important role in studying generic mean curvature flow.

Differential Geometry
New low-genus desingularizations of three Clifford tori and related characterizations

Nikolaos Kapouleas,David Wiygul

2024-08-20

Abstract:For each nonnegative integer $m$ we construct in the round three-sphere a closed embedded minimal surface of genus $48m+25$ which can be interpreted as a desingularization of the union of three Clifford tori intersecting pairwise orthogonally, along a total of six great circles. Each such surface is generated, under the action of a group of symmetries, by a disc with hexagonal boundary, all of whose sides are contained in great circles. We prove a uniqueness result for this disc, and, as a corollary, we characterize these surfaces. This characterization implies that similar surfaces we constructed for sufficiently high $m$ by gluing methods, in an earlier article, coincide with the ones here. For low $m$ the surfaces constructed here are new. Similarly, we prove uniqueness of the generating discs for one of two families constructed by Choe and Soret (namely the surfaces they call odd) and show that these surfaces also coincide, when of sufficiently high genus, with surfaces we have constructed by gluing.

Differential Geometry
Variants of Schroeder Dissections

Leonard M. Smiley

DOI: https://doi.org/10.48550/arXiv.math/9907057

1999-07-10

Abstract:Some formulae are given for the enumeration of certain types of dissections of the convex (n+2)-gon by non-crossing diagonals. The classical Schroeder and Motzkin numbers are addressed using a cataloguing tool, the "reversive symbol". The elementary details are referred to three Web addresses.

Combinatorics,Number Theory
Eighteen Hundred Years to a Corrigendum

Jeffrey C. Lagarias,Chuanming Zong

2012-01-01

Abstract:T he regular tetrahedron is the simplest Platonic solid. Nevertheless, in studying its packing properties, several renowned scholars have made mistakes, and many questions about it remain unsolved. Currently no one knows the density of its densest packings, the density of its densest translative packings, or the exact value of its congruent kissing number. In this paper we recount historical developments on packing regular tetrahedra, report new results on its translative packing density and congruent kissing number, and formulate several unsolved problems.
Volume Growth, Eigenvalue and Compactness for Self-Shrinkers

Qi Ding,Y. L. Xin

DOI: https://doi.org/10.4310/ajm.2013.v17.n3.a3

2013-01-01

Asian Journal of Mathematics

Abstract:In this paper, we show an optimal volume growth for self-shrinkers, and estimate a lower bound of the first eigenvalue of $\mathcal{L}$ operator on self-shrinkers, inspired by the first eigenvalue conjecture on minimal hypersurfaces in the unit sphere by Yau \cite{SY}. By the eigenvalue estimates, we can prove a compactness theorem on a class of compact self-shrinkers in $\ir{3}$ obtained by Colding-Minicozzi under weaker conditions.
Chip-firing on the Platonic solids: a primer for studying graph gonality

Marchelle Beougher,Kexin Ding,Max Everett,Robin Huang,Chan Lee,Ralph Morrison,Ben Weber

2024-07-07

Abstract:This paper provides a friendly introduction to chip-firing games and graph gonality. We use graphs coming from the five Platonic solids to illustrate different tools and techniques for studying these games, including independent sets, treewidth, scramble number, and Dhar's burning algorithm. In addition to showcasing some previously known results, we present the first proofs that the dodecahedron graph has gonality $6$, and that the icosahedron graph has gonality~$9$.

Algebraic Geometry,Combinatorics
Birational geometry of sextic double solids with a compound $A_n$ singularity

Erik Paemurru

2024-07-01

Abstract:Sextic double solids, double covers of $\mathbb P^3$ branched along a sextic surface, are the lowest degree Gorenstein Fano 3-folds, hence are expected to behave very rigidly in terms of birational geometry. Smooth sextic double solids, and those which are $\mathbb Q$-factorial with ordinary double points, are known to be birationally rigid. In this article, we study sextic double solids with an isolated compound $A_n$ singularity. We prove a sharp bound $n \leq 8$, describe models for each $n$ explicitly and prove that sextic double solids with $n > 3$ are birationally non-rigid.

Algebraic Geometry
Birational Geometry Of Sextic Double Solids With A Compound Singularity

ERIK PAEMURRU

DOI: https://doi.org/10.1017/nmj.2024.17

2024-09-19

Nagoya Mathematical Journal

Abstract:Sextic double solids, double covers of branched along a sextic surface, are the lowest degree Gorenstein terminal Fano 3-folds, hence are expected to behave very rigidly in terms of birational geometry. Smooth sextic double solids, and those which are -factorial with ordinary double points, are known to be birationally rigid. In this paper, we study sextic double solids with an isolated compound singularity. We prove a sharp bound , describe models for each n explicitly, and prove that sextic double solids with are birationally nonrigid.

mathematics
A maximum principle for self-shrinkers and some consequences

Antoine Song

DOI: https://doi.org/10.48550/arXiv.1412.4755

2014-12-15

Differential Geometry

Abstract:Using a maximum principle for self-shrinkers of the mean curvature flow, we give new proofs of a rigidity theorem for rotationally symmetric compact self-shrinkers and a result about the asymptotic behavior of self-shrinkers. This comparison argument also implies a linear bound for the second fundamental form of self-shrinking surfaces under natural assumptions. As a consequence, translating solitons can be related to these self-shrinkers.
Holographic Foliations: Self-Similar Quasicrystals from Hyperbolic Honeycombs

Latham Boyle,Justin Kulp

2024-08-28

Abstract:Discrete geometries in hyperbolic space are of longstanding interest in pure mathematics and have come to recent attention in holography, quantum information, and condensed matter physics. Working at a purely geometric level, we describe how any regular tessellation of ($d+1$)-dimensional hyperbolic space naturally admits a $d$-dimensional boundary geometry with self-similar ''quasicrystalline'' properties. In particular, the boundary geometry is described by a local, invertible, self-similar substitution tiling, that discretizes conformal geometry. We greatly refine an earlier description of these local substitution rules that appear in the 1D/2D example and use the refinement to give the first extension to higher dimensional bulks; including a detailed account for all regular 3D hyperbolic tessellations. We comment on global issues, including the reconstruction of bulk geometries from boundary data, and introduce the notion of a ''holographic foliation'': a foliation by a stack of self-similar quasicrystals, where the full geometry of the bulk (and of the foliation itself) is encoded in any single leaf in a local invertible way. In the $\{3,5,3\}$ tessellation of 3D hyperbolic space by regular icosahedra, we find a 2D boundary quasicrystal admitting points of 5-fold symmetry which is not the Penrose tiling, and record and comment on a related conjecture of William Thurston. We end with a large list of open questions for future analytic and numerical studies.

High Energy Physics - Theory,Strongly Correlated Electrons,Mathematical Physics,Metric Geometry,Quantum Physics

Self-shrinking Platonic solids

Self-shrinkers whose asymptotic cones fatten

Faces of platonic solids in all dimensions

The Platonic solids and fundamental tests of quantum mechanics

A Woven Klein Quartic

Vietoris-Rips complexes of Platonic solids

Arbitrarily Large Neighborly Families of Congruent Symmetric Convex 3-Polytopes

Rationalizing Euclidean Assemblies of Hard Polyhedra from Tessellations in Curved Space

Two-Dimensional Self-Trapping Structures in Three-Dimensional Space

The Marriage of Sierpiński Triangles and Platonic Polyhedra

Noncompact self-shrinkers for mean curvature flow with arbitrary genus

Smooth compactness of self-shrinkers

New low-genus desingularizations of three Clifford tori and related characterizations

Variants of Schroeder Dissections

Eighteen Hundred Years to a Corrigendum

Volume Growth, Eigenvalue and Compactness for Self-Shrinkers

Chip-firing on the Platonic solids: a primer for studying graph gonality

Birational geometry of sextic double solids with a compound $A_n$ singularity

Birational Geometry Of Sextic Double Solids With A Compound Singularity

A maximum principle for self-shrinkers and some consequences

Holographic Foliations: Self-Similar Quasicrystals from Hyperbolic Honeycombs