Abstract:The dynamic process of a debris avalanche in mountainous areas is influenced by the landslide volume, topographical conditions, mass-material composition, mechanical properties and other factors. A good understanding of the mass movement and loose material supplying the gully process is very important for understanding the dynamic properties of debris avalanches. Three-dimensional particle flow code (PFC3D) was used to simulate a debris avalanche in Quaternary deposits at the Bayi Gully, Southwest China. FORTRAN and AutoCAD were used for the secondary development to display the mass movement process and to quantitatively describe the mass movement and loose material supplying the gully process. The simulated results show that after the landslide is initiated, the gravitational potential energy is converted into kinetic energy with a variation velocity for the sliding masses. Two stages exist for the average-movement velocity: the acceleration stage and the slowdown stage, which are influenced by the topographical conditions. For the loose materials supplying the gully process, the cumulative volume of the sliding masses into the gully gradually increases over the time. When the landslide volume is not large enough, the increasing landslide volume does not obviously influence the movement process of the sliding masses. The travel distance and movement velocity increase with the decreasing numerical parameters, and the mass-movement process is finished more quickly using low-value parameters. The deposition area of the sliding masses decreases with the increasing numerical parameters and the corresponding deposition thickness increases. The mass movement of the debris avalanche is not only influenced by the mechanical parameters but is also controlled by the topographical conditions. (C) 2015 Elsevier Ltd. All rights reserved.

Rapid motions of free-surface avalanches down curved and twisted channels and their numerical simulation

A Depth-Averaged 2-D Model of Non-Cohesive Dam/Levee Breach Processes

Depth-Averaged Two-Dimensional Model of Unsteady Flow and Sediment Transport Due to Noncohesive Embankment Break/Breaching

A Three-Dimensional Yield-Criterion-Based Flow Model for Avalanches

Physically Based Modeling and Rendering of Avalanches

Simulation of Natural Shallow Avalanches with the Μ(i) Rheology

Mathematical modeling of powder-snow avalanche flows

Including Μ(i) Rheology in Three-Dimensional Navier–stokes-governed Dynamic Model for Natural Avalanches

A depth‐averaged description of submarine avalanche flows and induced surface waves

Modelling of Avalanche-Obstacle Interaction Using the Depth-Averaged Continuum Approach

Dynamic Thermomechanical Modeling of Rock‐Ice Avalanches: Understanding Flow Transitions, Water Dynamics, and Uncertainties

Immiscible Two-Phase Model for Air Blasts Created During Natural Avalanches

Discrete Element Modeling of the Mass Movement and Loose Material Supplying the Gully Process of a Debris Avalanche in the Bayi Gully, Southwest China

A well-balanced positivity preserving two-dimensional shallow flow model with wetting and drying fronts over irregular topography

Μ(j)-Rheology-based Depth-Averaged Dynamic Model for Roll Waves in Granular–fluid Avalanches

A Shallow Constitutive Law-Based Granular Flow Model for Avalanches

Hybrid Simulation of the Initiation and Runout Characteristics of A Catastrophic Debris Flow

Two-dimensional Mathematical Model of Debris Flow

Velocity Profiles of Avalanches During Hopper Discharge

Application of an Inertia Dependent Flow Friction Model to Snow Avalanches: Exploration of the Model Using a Ping-Pong Ball Experiment

Multi-component avalanches for rock- and ice-falls to potential debris flow transition modelling