Abstract:The key to the practical application of organometal–halide crystals perovskite solar cells (PSCs) is to achieve thermal stability through robust encapsulation. This paper presents a method to significantly extend the thermal stability lifetime of perovskite solar cells to over 5000 h at 85 °C by demonstrating an optimal combination of encapsulation methods and perovskite composition for carbon-based multiporous-layered-electrode (MPLE)-PSCs. We fabricated four types of MPLE-PSCs using two encapsulation structures (over- and side-sealing with thermoplastic resin films) and two perovskite compositions ((5-AVA)x(methylammonium (MA))1−xPbI3 and (formamidinium (FA))0.9Cs0.1PbI3), and analyzed the 85 °C thermal stability followed by the ISOS-D-2 protocol. Without encapsulation, FA0.9Cs0.1PbI3 exhibited higher thermal stability than (5-AVA)x(MA)1−xPbI3. However, encapsulation reversed the phenomenon (that of (5-AVA)x(MA)1−xPbI3 became stronger). The combination of the (5-AVA)x(MA)1−xPbI3 perovskite absorber and over-sealing encapsulation effectively suppressed the thermal degradation, resulting in a PCE value of 91.2% of the initial value after 5072 h. On the other hand, another combination (side-sealing on (5-AVA)x(MA)1−xPbI3 and over- and side-sealing on FA0.9Cs0.1PbI3) resulted in decreased stability. The FACs-based perovskite was decomposed from these degradation mechanisms by the condensation reaction between FA and carbon. For side-sealing, the space between the cell and the encapsulant was estimated to contain approximately 1,260,000 times more H2O than in over-sealing, which catalyzed the degradation of the perovskite crystals. Our results demonstrate that MA-based PSCs, which are generally considered to be thermally sensitive, can significantly extend their thermal stability after proper encapsulation. Therefore, we emphasize that finding the appropriate combination of encapsulation technique and perovskite composition is quite important to achieve further device stability.

A Perylene‐Based Conjugated Polymer Endows Perovskite Solar Cells with 85 °C Durability: The Control of Gas Permeation

A Conductive Molecular Semiconductor Composite with over 160 °C Glass Transition Temperature for Heat‐Resistant Perovskite Solar Cells

Main chain engineering of phenothiazine-based semiconducting copolymers for stable perovskite solar cells at 85 °C

A Doped Hole Transport Layer Qualified for 100 °C‐Tolerant Perovskite Solar Cells

A spiro-OMeTAD based semiconductor composite with over 100 °C glass transition temperature for durable perovskite solar cells

Conjugated polymers of an oxa[5]helicene-derived polycyclic heteroaromatic: tailoring energy levels and compatibility for high-performance perovskite solar cells

In Situ Polymer Network in Perovskite Solar Cells Enabled Superior Moisture and Thermal Resistance

Enhancing Thermal Stability of Perovskite Solar Cells through Thermal Transition and Thin Film Crystallization Engineering of Polymeric Hole Transport Layers

Controlling the Decomposition of Hybrid Perovskite by a Dithienopyrrole-Based Hole Transport Layer toward Thermostable Solar Cells

Thermal Stability of Encapsulated Carbon-Based Multiporous-Layered-Electrode Perovskite Solar Cells Extended to Over 5000 h at 85 °C

Enhancing perovskite solar cell performance: The role of polymer-assisted hole transport layers in hot carrier dynamics

Perylene-Based Conjugated Polymers for Efficient and Stable Perovskite Solar Cells: The Superior Role of the Alkyl Side Chain over Oligo(ethylene glycol)

Improving Heat Transfer Enables Durable Perovskite Solar Cells

Durable Perovskite Solar Cells with 24.5% Average Efficiency: the Role of Rigid Conjugated Core in Molecular Semiconductors

A Helicene-Based Molecular Semiconductor Enables 85 °C Stable Perovskite Solar Cells

A Helical Polycycle Molecular Semiconductor for Durable and Efficient Perovskite Solar Cells

Internal Encapsulation Enables Efficient and Stable Perovskite Solar Cells

In Situ Polymerizing Internal Encapsulation Strategy Enables Stable Perovskite Solar Cells toward Lead Leakage Suppression

A bilayer conducting polymer structure for planar perovskite solar cells with over 1,400 hours operational stability at elevated temperatures

Resist Thermal Shock Through Viscoelastic Interface Encapsulation in Perovskite Solar Cells

Stabilizing Perovskite Solar Cells Based on 2,2′,7,7′‐Tetrakis(N,N‐DI‐P‐Methoxyphenylamine)‐9,9′‐Spirobifluoren with Perfluoropolyethers