Abstract:Single-crystal perovskites with excellent photophysical properties are considered to be ideal materials for optoelectronic devices, such as lasers, light-emitting diodes and photodetectors. However, the growth of large-scale perovskite single-crystal films (SCFs) with high optical gain by vapor-phase epitaxy remains challenging. Herein, we demonstrated a facile method to fabricate large-scale thin CsPbBr3 SCFs (∼300 nm) on the c-plane sapphire substrate. High temperature is found to be the key parameter to control low reactant concentration and sufficient surface diffusion length for the growth of continuous CsPbBr3 SCFs. Through the comprehensive study of the carrier dynamics, we clarify that the trapped-related exciton recombination has the main effect under low carrier density, while the recombination of excitons and free carriers coexist until free carriers plays the dominate role with increasing carrier density. Furthermore, an extremely low-threshold (∼8 μJ cm–2) amplified spontaneous emission was achieved at room temperature due to the high optical gain up to 1255 cm–1 at a pump power of 20 times threshold (∼20 Pth). A microdisk array was prepared using a focused ion beam etching method, and a single-mode laser was achieved on a 3 μm diameter disk with the threshold of 1.6 μJ cm–2. Our experimental results not only present a versatile method to fabricate large-scale SCFs of CsPbBr3 but also supply an arena to boost the optoelectronic applications of CsPbBr3 with high performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.0c06380?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.0c06380</a>.CsPbBr3 SCFs growth experimental details, additional structure and optical property characterization of CsPbBr3 SCFs with optical images, SEM images, XRD patterns, PL and TA spectra, ASE and optical gain analysis; microdisk array lasing performance; calculation of carrier density and Mott density, steady-state absorption spectrum analysis, carrier recombination models analysis and discussion (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.0c06380/suppl_file/nn0c06380_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High‐Throughput Growth of Armored Perovskite Single Crystal Fibers for Pixelated Arrays

A Microchannel‐Confined Crystallization Strategy Enables Blade Coating of Perovskite Single Crystal Arrays for Device Integration

Silicone‐Assisted Autonomous Growth of Strainless Perovskite Single Crystals for Integrated Low‐Dose X‐Ray Imaging Arrays

A general method for growth of perovskite single-crystal arrays for high performance photodetectors

Co-axial silicon/perovskite heterojunction arrays for high-performance direct-conversion pixelated X-ray detectors

In Situ Growth of All-Inorganic Perovskite Single Crystal Arrays on Electron Transport Layer

In Situ Low-Temperature Growth and Superior Luminescent Property of Well-Aligned, High-Quality Cubic CsPbBr3 Micrometer-Scale Single Crystal Arrays on Transparent Conductive Substrates.

Large-Scale Thin CsPbBr 3 Single-Crystal Film Grown on Sapphire via Chemical Vapor Deposition: Toward Laser Array Application

Controlled on-chip fabrication of large-scale perovskite single crystal arrays for high-performance laser and photodetector integration

Pattern-Selective Molecular Epitaxial Growth of Single-Crystalline Perovskite Arrays toward Ultrasensitive and Ultrafast Photodetector

A Universal Fabrication Strategy for High‐Resolution Perovskite‐Based Photodetector Arrays

Large-Scale Thin CsPbBr3 Single-Crystal Film Grown on Sapphire Via Chemical Vapor Deposition: Toward Laser Array Application

Wafer-scale growth of large arrays of perovskite microplate crystals for functional electronics and optoelectronics

Heterointerface Design of Perovskite Single Crystals for High‐Performance X‐ray Imaging

Growth of centimeter-scale perovskite single-crystalline thin film via surface engineering

On-site growth of perovskite nanocrystal arrays for integrated nanodevices

Steady‐State Inverse‐Temperature Crystallization Enabling Low Defect Perovskite Single Crystal and Efficient X‐Ray Detectors

Realizing CsPbBr3 Light-Emitting Diode Arrays Based on PDMS Template Confined Solution Growth of Single-Crystalline Perovskite.

Achieving High-Quality Sn-Pb Perovskite Films on Complementary Metal-Oxide-Semiconductor-Compatible Metal/Silicon Substrates for Efficient Imaging Array.

Liquid-Phase Epitaxial Growth of Large-Area MAPbBr 3– n Cl n /CsPbBr 3 Perovskite Single-Crystal Heterojunction for Enhancing Sensitivity and Stability of X-ray Detector

Large-area large-grain CsPbCl<sub>3</sub> perovskite films by confined re-growth for violet photodetectors