Abstract:The improved understandings of the mechanical properties as well as deformation mechanisms at cryogenic temperatures are the prerequisite for realizing the application of any new engineering materials to cryogenic industries. Here, a (CoCrNi) 94 Al 3 Ti 3 medium entropy alloy (MEA) with nanoscale L1 2 coherent precipitates and heterogeneous grain structures was prepared by co-doping Al and Ti elements with subsequent cold rolling and heat treatment processes. The mechanical properties were evaluated at the temperature range of 293–113 K. The ultimate strength of the MEA increases almost linearly from 1326 to 1695 MPa as the temperature decreases from 293 to 113 K, while the total elongation remains approximately constant of ∼35%. The underlying deformation and strengthening mechanisms were investigated using various characterization techniques. Due to the effect of co-doped Al/Ti on channel width of the matrix and the increasing critical twinning stress induced by heterogeneous ultrafine grain size, the formation of deformation twins is inhibited at all temperatures. Consequently, only a slight increase of the deformation twins and stacking faults in the deformed specimens with a decreasing temperature, which leads to the relative temperature-independence of the ductility. The dislocation cutting mechanism of L1 2 coherent precipitates and the heterodeformation induced (HDI) hardening both significantly contribute to the strain hardening so that an excellent combination of strength and ductility is obtained. Additionally, the evolution of lattice friction stress with deformation temperature is determined by quantitative analysis, indicating an approximately linear relationship between the lattice friction and temperature. The present work provides new insights into the strategy of achieving outstanding strength-ductility synergy of the MEA under the wide temperature range by coupling heterogeneous ultrafine-grained structure and coherent precipitation strategy.

Superior cryogenic strength and ductility in VNbTa body-centered cubic medium-entropy alloys

Strong work-hardenable body-centered-cubic high-entropy alloys at cryogenic temperature

Mechanical instability and tensile properties of TiZrHfNbTa high entropy alloy at cryogenic temperatures

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Tensile Properties of a Non-Equiatomic Ni–Co–V Medium Entropy Alloy at Cryogenic Temperature

Microstructures and mechanical behavior of non-equiatomic Co29Cr29Fe29Ni13-V high-entropy alloys at room and cryogenic temperatures

Superconductivity in the medium-entropy alloy TiVNbTa with a body-centered cubic structure

Enhanced Strength and Plasticity of CoCrNiAl0.1Si0.1 Medium Entropy Alloy via Deformation Twinning and Microband at Cryogenic Temperature

Alloying effect on phase stability, elastic and thermodynamic properties of Nb-Ti-V-Zr high entropy alloy

Microstructure and mechanical properties of lightweight Al CrNbTiV(x = 0.2, 0.5, 0.8) refractory high entropy alloys

Solidification Microstructures of V-Nb-Mo-Ta-W Alloys: Insights from Non-equiatomic Alloys

Microstructure and Mechanical Properties of a New Refractory HfNbSi<sub>0.5</sub>TiVZr High Entropy Alloy

Precipitation and heterogeneous strengthened CoCrNi-based medium entropy alloy with excellent strength-ductility combination from room to cryogenic temperatures

A novel lightweight refractory high-entropy alloy

Effects of Ti content on the tensile ductility, lattice distortion and mechanical properties of VNbTaTi x refractory high-entropy alloys

A novel cobalt-free FeMnCrNi medium-entropy alloy with exceptional yield strength and ductility at cryogenic temperature

Achieving an excellent combination of strength and ductility in a single-phase metastable medium-entropy alloy

Plastic Deformation Behavior of 40Fe–25Ni–15Cr–10Co–10V High-Entropy Alloy for Cryogenic Applications

Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures

Remarkable cryogenic properties by deformation twinning in a coherent precipitation-containing high entropy alloy

Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys