Towards Formal Development of Programs from Algebraic Specifications: Model-Theoretic Foundations

D. Sannella,A. Tarlecki

DOI: https://doi.org/10.1007/3-540-55719-9_112

1992-07-13

Abstract:

What problem does this paper attempt to address?

Fluorescent Poly(hydroxyurethane): Biocompatibility Evaluation and Selective Detection of Fe(III)

Wan Xu,Bin Liu,Xiaobo Cai,Mohan Zhang,Xing-Hong Zhang,Peilin Yu

DOI: https://doi.org/10.1002/app.46723

IF: 3

2018-01-01

Journal of Applied Polymer Science

Abstract:ABSTRACTPolyurethane (PU) is widely used in biomedical applications owing to its excellent physical and chemical properties. As an isocyanate‐free PU material, fluorescent poly(hydroxyurethane) (FPHU) is synthesized from the addition of the cyclic carbonates with amines rather than the toxic isocyanate with diols, which reduces the possible injury to the human due to trace amounts of the isocyanate residues. Herein, we report the biocompatibility of a FPHU that can be synthesized from carbon dioxide, bisepoxides, and diamine in tandem. Of unique, FPHU exhibits a strong blue fluorescence and is selectively sensitive to Fe3+ with a detection limit of 4.56 μM. The overall results of the methylthiazolyldiphenyl‐tetrazolium, cytokine release, and hemolysis assays for FPHU indicates that FPHU has much lower cytotoxicity and immunotoxicity compared with the traditional isocyanate PU, as well as a good blood compatibility with less than 5% hemolysis rate. Therefore, FPHU presents as a kind of safer PU and can be prospectively applied in medical materials.
Characterization, biodegradability and blood compatibility of poly[(R)-3-hydroxybutyrate] based poly(ester-urethane)s.

Qiaoyan Liu,Shaoting Cheng,Zibiao Li,Kaitian Xu,Guo-Qiang Chen

DOI: https://doi.org/10.1002/jbm.a.32180

2009-01-01

Journal of Biomedical Materials Research Part A

Abstract:Poly(ester-urethane)s (PUs) were synthesized using hexamethylene diisocyanate (HDI) or toluene diisocyanate (TDI) to join short chains (M-n = 2000) of poly(R-3-hydroxybutyrate) (PHB) diols and poly(epsilon-caprolactone) (PCL) diols with different feed ratios under different reaction conditions. The multiblock copolymers were characterized by nuclear magnetic resonance spectrometer (NMR), gel permeation chromatography (GPC), differential scanning calorimetry (DSC), thermogravimetric analyses (TGA), X-ray diffraction (XRD), and scanning electron microscope (SEM). XRD spectra and second DSC heat thermograms of the multiblock copolymers revealed that the crystallization of both PHB and PCL segments was mutually restricted, and, especially, the PCL segment limited the cold crystallization of the PHB segment. The SEM of platelet adhesion experiments showed that the hemocompatibility was affected to some extent by the chain flexibility of the polymers. Hydrolysis studies demonstrated that the hydrolytic degradation of PUs was generated from the scission of their ester bonds or/and urethane bonds. Simultaneously, the rate of ester bond scission was determined to some extent by the crystallization degree, which was further affected by the configuration of polymer chains. These highly elastic multiblock copolymers combining hemocompatibility and biodegradability may be developed into blood contact implant materials for biomedical applications. (C) 2008 Wiley Periodicals, Inc. J Biomed Mater Res 90A: 1162-1176, 2009
Risk factors for leptospirosis in metropolitan France: results of a national case-control study, 1999-2000.

A. Nardone,I. Capek,G. Baranton,C. Campèse,D. Postic,V. Vaillant,Michel Liénard,J. Desenclos

DOI: https://doi.org/10.1086/423272

IF: 20.999

2004-09-01

Clinical Infectious Diseases

Abstract:Risk factors for leptospirosis in France were investigated to improve the vaccination program for this disease. Data from 90 hospitalized case patients and 169 matched control subjects were analyzed in a case-control study. Skin lesions, canoeing, contact with wild rodents, and country residence were independently associated with leptospirosis, emphasizing that leisure activity is a risk factor for this illness.
Biodegradation of polycarbonate polyurethane

Tuo Xin-lin,Xia Wei-juan,Cheng Xiao-fei,Wu Ji-gong,Zou De-wei

DOI: https://doi.org/10.3969/j.issn.1673-8225.2010.47.022

2010-01-01

Abstract:BACKGROUND:Different polyurethanes vary in biostability.Study on the biostability of polycarbonate polyurethane(PCU)is important to determine the feasibility of polyurethane used as the external capsule of prosthetic disc nucleus pulposus.OBJECTIVE:To observe the in vitro and in vivo degradation properties of polyether polyurethane(PEU)and PCU with different hard segment contents.METHODS:The in vitro hydrolysis,oxidative degradation and enzymolysis experiments of the polyurethane were performed in simulated environment.The prepared PEU and PCU samples were dipped into PBS and "H2O2/CoCl2 preoxidation-Papain" systems for in vitro degradation study at 37 ℃,and implanted into the back muscle of white rabbits for in vivo degradation experiment.RESULTS AND CONCLUSION:The degradation of PCU is greatly better than PEU,with larger hard segment contents and stronger degradation resistance.PCU is much more biostable than PEU,it's more suitable for long-time biological implantation.
Synthesis and Biocompatibility of Anionic Polyurethane Nanoparticles Coated with Adsorbed Chitosan

Dan Xu,Ke Wu,Qiuhong Zhang,Heyi Hu,Kai Xi,Qingming Chen,Xuehai Yu,Jiangning Chen,Xudong Jia

DOI: https://doi.org/10.1016/j.polymer.2010.03.008

IF: 4.6

2010-01-01

Polymer

Abstract:Through the assembly of polyelectrolyte in aqueous emulsion, we synthesized a series of core–shell ionic complex nanoparticles containing anionic polyurethane (PU) and cationic chitosan (CS). The physicochemical properties of PU–CS ionic complex (PU-c-CS) materials were investigated by IR, XPS, DLS, TEM, AFM, general tensile tests, and surface contact angle measurement. It was found that the sizes of the prepared nanoparticles were in the range from 60 to 220nm, and the films exhibited good mechanical properties. The cell (HUVECs) culture experiments showed that the PU-c-CS films exhibited very low cytotoxicity and supported cell adhesion and growth. Protein (BSA) adsorption was significantly decreased for the PU-c-CS films. Furthermore, the results of prothrombin time (PT) and activated partial thromboplastin time (APTT) indicated that antithrombogenicity of the materials were effectively improved.
Performance Study of Biodegradable Polyurethanes from Different Biodicarboxylic Acids and Their Potential Applications

Xian Zhang,Shuai Jiang,Sipei Zhao,Rui Zan,Xiang Chen,Mengxuan Shu,Xiao Lu,Tao Suo,Jianming Guo,Zhong Xin

DOI: https://doi.org/10.1021/acsapm.4c01567

2024-01-01

ACS Applied Polymer Materials

Abstract:The chemical structure of polyester polyols significantly influences the properties of polyester-based polyurethane. This study involves synthesizing covalently cross-linked 3D network polyester polyols (poly(glycerol adipate) (PGA), poly(glycerol sebacate) (PGS), and poly(glycerol dodecanoate) (PGD)) from polycondensation of glycerol with bioderived aliphatic dicarboxylic acids (adipic acid, sebacic acid, and decanoic acid, with carbon chain lengths ranging from C4 to C10), followed by further polyurethane synthesis with dicyclohexylmethane diisocyanate. A systematic analysis was conducted to investigate the relationship between the carbon chain units of the biodicarboxylic acid and the physicochemical properties of the polyurethanes. The chemical structure, crystallization and melting behavior, thermal stability, mechanical properties, and biodegradability of the polyurethane were investigated by NMR, FT-IR, XRD, DSC, TGA, and mechanical test. The crystallization and melting point of the polyols gradually increased with increasing carbon chain length (C4-C10) units. The thermal stability, ultimate tensile strength, and elongation at break of the obtained PU polymer also gradually increased with the increasing carbon chain length units in the polyols. Besides, in vitro cell culture of adult mouse fibroblast L929 cells showed good support for cell viability. Furthermore, the investigation delves into potential medical applications of these polymers, such as the development of biodegradable antimicrobial coatings with norfloxacin and their potential use as temperature-responsive scaffolds. All polyurethanes exhibited body temperature (37 degrees C)-responsive behavior, and the shape recovery speed decreases gradually in the order of P(PGA)U, P(PGS)U, and P(PGD)U. This research contributes valuable support for the development of customizable medical materials with specific mechanical properties, degradation behavior, and stimulus-responsive characteristics.
The effect of PCL/PEG ABA block lengths on the crystallization of homo/block- based polyurethane/CNW nanocomposites

Mohammad Nourany,Shadi Ghelichkhani,Hadi Sarkhosh,Mehrad Zakizadeh,Toktam Behrouz

DOI: https://doi.org/10.1007/s10965-020-02376-y

IF: 3.061

2021-01-01

Journal of Polymer Research

Abstract:We report synthesis and characterization of a set of thermoset polyurethane (PU) bionanocomposites based on a polyol blend of poly(ε-caprolactone)/ polyethylene glycol (PCL/PEG) ABA block copolymers and their homopolymers (M<sub>w</sub>: 2000 D). ABA block copolymers of PCL/PEG, with variable block lengths, were blended with their homopolymers. The relative weight content of Homo: Block (HB) was set 1:1 and the blend was used to synthesize a PU bionanocomposite using HDI and cellulose nanowhisker (CNW). The change in PEG and PCL block lengths resulted in an extensive change in the crystallization of the soft domains. The results of dynamic and thermal analysis revealed an increasing trend in the crystallization of the PCL/PEG segments as their lengths increase in the block copolymer structure. The shape memory analysis of the PU specimens showed high recovery (84-100%) and fixity (93-100%) ratios. Specimens with about one-order of magnitude fall in the storage modulus in the plateau region showed the highest fixity ratios. The relatively stable storage modulus at the elevated temperature indicate lack of flow for the PU nanocomposites and their thermoset nature. The cytotoxity analysis of the specimens showed a great cytocompatibility, indicating their great potential in the field of tissue engineering as a new biomaterial model. HB6 was selected as the optimum sample with SR and SF of 100%, with the highest cell viability.

polymer science
Effects of oligoethylene oxide monoalkyl(aryl) alcohol ether grafting on the surface properties and blood compatibility of a polyurethane.

F Lim,X H Yu,S L Cooper

DOI: https://doi.org/10.1016/0142-9612(93)90243-U

IF: 14

1993-01-01

Biomaterials

Abstract:A series of oligoethylene oxide monoalkyl(aryl) alcohol ethers was grafted on to the backbone of a polytetramethylene oxide (PTMO)-based polyurethane, in an attempt to improve its biocompatibility. Each polyurethane contained a different pendant chain grafted to the urethane nitrogen atoms. The grafted chains consisted of various short lengths of hydrophilic oligomeric poly(ethylene oxide) (PEO) spacer segments and alkyl/aryl hydrophobic terminal groups. By using the H-1-NMR (nuclear magnetic resonance) technique, the extent of grafting was found to range from 7 to 12 mol% substitution of the urethane hydrogen groups. The surface properties of these materials were evaluated using high-vacuum, air-equilibrated and water-equilibrated methods. X-ray photoelectron spectroscopy (XPS) and static and dynamic contact angle experiments were performed. XPS showed that all of the grafted polyurethane surfaces contained higher ratios of C1s to O1s than the base polyurethane. These C:O contents correlate with the C:O ratios of the grafted chains. Dynamic contact angle analysis showed larger contact angle hysteresis for the grafted polyurethanes. The grafted polyurethanes generally exhibit lower complement activation, measured by an in vitro assay for C3a. A canine ex vivo arteriovenous series shunt was used to monitor platelet and fibrinogen deposition on these polymers. The incorporation of short ethylene oxide spacer segments with terminal C18 linear alkyl chains resulted in an improved short-term (up to 15 min) blood compatibility compared to the underivatized polyurethane. At longer blood contact times, all the grafted polyurethanes were more thrombogenic than the base polyurethane. In addition, there was no observable correlation between the material surface properties and the blood contact response.
Surface Immobilization of Bioactive Molecules on Polyurethane for Promotion of Cytocompatibility to Human Endothelial Cells

CY Gao,JJ Guan,YB Zhu,JC Shen

DOI: https://doi.org/10.1002/mabi.200390020

2003-01-01

Macromolecular Bioscience

Abstract:Cytocompatible polymers are of increasing importance for tissue engineering scaffolds and implanted devices. Polyurethane (PU) membranes were modified by grafting polymerization of methacrylic acid (MAA) initiated by UV light and further covalent immobilization of gelatin or arginine-glycine-aspartic (RGD) peptide using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride as a condensing agent. The immobilization of gelatin or RGD peptide was confirmed by FTIR attenuated total reflection (ATR) spectroscopy and X-ray photoelectron spectroscopy (XPS). The results for endothelial cells cultured in vitro proved that the PU membrane modified with gelatin or rGD peptide had better cytocompatibility than the control PU or the PMAA grafted PU membrane.[GRAPHICS]ATR-FTIR spectra of PU-graft-PMAA (a), PU-graft-PMAA-graft-RGD (b), and their subtraction result (c). The PMAA grafting degree is 21.56 x 10(-2) mg/cm(2).
Defibrotide for the prevention of hepatic veno‐occlusive disease after hematopoietic stem cell transplantation: a systematic review

Li-fei Zhang,Yebo Wang,He Huang

DOI: https://doi.org/10.1111/j.1399-0012.2012.01604.x

2012-07-01

Clinical Transplantation

Abstract:Prophylactic use of defibrotide (DF) to prevent veno‐occlusive disease (VOD), a relatively common and high‐risk complication of hematopoietic stem cell transplantation (HSCT), may be an encouraging modality to reduce morbidity and mortality from VOD. However, conclusions remain unclear. We carried out a systematic review to summarize the state of knowledge. One randomized controlled trial (RCT), four cohort studies and eight case series studies were found, including a total of 1230 patients. The overall mean incidence of VOD in patients using DF was 4.7% (95% CI, 3.3–6.1) which was significantly lower than the data 13.7% (95% CI, 13.3–14.1) across 135 studies using no VOD prophylaxis (p < 0.005). The meta‐analysis of the incidence of VOD in controlled trials revealed a statistical reduction in VOD incidence in the DF group (RR = 0.47, 95% CI, 0.31–0.73). The overall mean incidence of severe VOD was 0.8% (95% CI, 0.2–1.4). The RR was 0.31 (95% CI, 0.09–1.06). However, the lack of RCTs and the methodological weaknesses of the studies may preclude making generalizable conclusions. Our review described that DF appears promising for VOD prevention and large RCT is needed for further confirmation.
Polyurethane as smart biocoatings: Effects of hard segments on phase structures and properties

Yujie Wang,Lili Wang,Hao Liu,Suqin He,Xuying Liu,Wentao Liu,Miaoming Huang,Chengshen Zhu

DOI: https://doi.org/10.1016/j.porgcoat.2020.106000

IF: 6.6

2021-01-01

Progress in Organic Coatings

Abstract:<p>Development of smart polyurethane (PU) coatings for enhancing the biocompatibility of the metal scaffold has attracted great interest in the past few years, and the investigation of the relationship between phase structure and smart properties is necessary. Herein, two series of PU biocoatings with different hard segment structures and soft segment length were prepared, and the soft segments consist of the polycaprolactone diols (PCL) with different molecular weights, and the hard segments were made of 1, 4-butanediol (BDO) and hexamethylene diisocyanate (HDI) with linear structure, or BDO and isophorone diisocyanate (IPDI) with alicyclic structure, respectively. To understand the phase structures, the chemical structure, surface micromorphology, and segmental incompatibility of the PU films were characterized, which reveals that IPDI-based PU possesses a phase compatible structure with a single-phase transition above 0 °C. Besides, the IPDI-based PU shows the thermal-responsive deformation at the temperature of 45 °C, slightly higher than the human body temperature. In contrast, the HDI-based PU possesses the excellent shape memory property caused by the microphase separation structure, because of the crystallization of soft and hard segments from the melt. Further, based on the characteristics of phase structure, the potential application of the IPDI-based PU and HDI-based PU is explored, offering a useful approach to effectively design the structures and properties of PU coatings.</p>

materials science, coatings & films,chemistry, applied
Synthesis, Characterization and Biocompatibility of Biodegradable Elastomeric Poly(ether-ester Urethane)s Based on Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) and Poly(ethylene Glycol) Via Melting Polymerization

Zibiao Li,Xiaodi Yang,Linping Wu,Zhifei Chen,Yuting Lin,Kaitian Xu,Guo-Qiang Chen

DOI: https://doi.org/10.1163/156856209x452944

2009-01-01

Journal of Biomaterials Science Polymer Edition

Abstract:Poly(ether-ester urethane)s (PUs) multiblock co-polymers were synthesized from telechelic hydroxylated poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) and poly(ethylene glycol) (PEG) via a melting polymerization (MP) process using 1,6-hexamethylene diisocyanate (HDI) as a non-toxic coupling agent for the first time. The PHBHHx segments and PEG segments in the multiblock co-polymers behaved as a hard, hydrophobic and a soft, hydrophilic part, respectively. Their chemical structures and molecular characteristics were studied by gel-permeation chromatography (GPC), 1H-NMR and Fourier transform infrared spectroscopy (FT-IR). The PU produced via the MP method showed a higher molecular weight than those resulting from the solvent polymerization (SP) reported previously. Thermal properties showed enhanced thermal stability with semi-crystalline morphology via incorporation of PEG. The segments compositions evaluated from thermogravimetric analysis (TGA) two-step thermal decomposition profiles suggested that MP enhanced the reactivity of PEG compared with the SP process. It was in good agreement with those calculated from 1H-NMR, as well as the precursor feed ratio, respectively. Water contact angle measurements revealed that surface hydrophilicity of the PUs was enhanced by incorporating the PEG segment into PHBHHx polymer backbone. The mechanical properties assessment of the PUs recorded an improved and adjustable ductility and toughness than pure PHBHHx while preserving the tensile strength. Samples synthesized via MP were resistant to hydrolytic and lipase degradation, yet the multiblock co-polymers incorporating the highest amount of PEG degraded at the highest rate. SEM studies revealed that the surface of the PU films became increasingly porous as the degradation proceeded. Implantation of PU in mouse abdominal cavity indicated that tissue regeneration and tissue compatibility of PU film was better than that of PHBHHx-only film.
The effect of differing types of cloth and of contamination by non-feed nitrogen on intestinal digestion estimates using porous synthetic-fibre bags in a cow

T. Varvikko,A. Vanhatalo

DOI: https://doi.org/10.1079/BJN19900109

1990-03-01

British Journal Of Nutrition

Abstract:The influence of free surface area and pore size of a synthetic-fibre bag, and flow of intestinal substances into the bag, on the intestinal digestion estimates by the nylon-bag method of dry matter (DM), neutral detergent fibre (NDF), nitrogen, NDF-N and feed 15N was studied using a non-lactating cow fed on hay supplemented with barley and oats at maintenance level. The bags containing 15N-labelled ground ryegrass (Lolium perenne), barley, barley straw or rapeseed (Brassica napus) straw were introduced into the duodenum through a T-shaped cannula and collected from the faeces. Also, the disappearance of N from the bag was related to the true intestinal N digestion by comparing it with the net loss between duodenum and faeces of 15N in ryegrass introduced into the duodenum in an aqueous suspension. It was noted that the bag cloth often significantly affected both disappearance values and the subsequent chemical composition of the residues. Re-analysing part of the data as a 2x2 factorial (free surface x pore size) suggested that free surface area was often more important than pore size as a determinant of both disappearance values and chemical composition. Lower apparent (Kjeldahl N) than true (15N) feed N disappearance from the bag suggested a notable proportion of non-feed N in the residues, especially with fibrous feeds with low N. With ryegrass, 15N net loss within the intestine was lower than 15N disappearance from the bags. It was concluded that disappearance of Kjeldahl N is an underestimate of feed N disappearance from bags, but may possibly be an overestimate of the true intestinal digestion of feed N.
Influence of Quaternized Polyurethane Membrane Surfaces on Human Endothelial Cell Attachment and Growth

Y Hong,CY Gao,JJ Guan,JC Shen

DOI: https://doi.org/10.1177/0883911503035386

2003-01-01

Journal of Bioactive and Compatible Polymers

Abstract:Poly(ester urethane) (PU) membranes with cationic groups on the surface was prepared by grafting N,N-dimethylaminoethyl methacrylate (DMA), followed by quaternization with iodomethane. Fourier transform infrared-attenuated total reflectance (FTIR-ATR) spectroscopy, X-ray photo-eletron spectroscopy (XPS) and scanning electron microscopy (SEM) evaluations verified the occurrence of the grafting polymerization and the quaternization. The endothelial cell attachment, viability, proliferation and morphology were investigated by in vitro cultures of the cationic membrane (PU-g-PDMAQ). The results show that the cytocompatibility of the cationic membrane with a specific amount of PDMAQ was improved. However, compared with its precursor, the PDMA grafted membrane (PU-g-PDMA), the cytocompatibility was not very different. These results suggest that the positive charges do not significantly improve the cytocompatibility to endothelial cells in comparison with the PU-g-PDMA neutral surface.
The in Vitro and in Vivo Stability of Poly(urethaneurea)s As Biomedical Materials

LM Wu,B You,D Li,F Qian

DOI: https://doi.org/10.1016/s0141-3910(00)00089-6

IF: 5.204

2000-01-01

Polymer Degradation and Stability

Abstract:The in vitro and in vivo stability of poly(ether urethaneurea) (PEUU) films and blood sacs with or without chemically modification by poly(dimethyl siloxane) (PDMS) has been investigated, respectively. Gel permeation chromatography (GPC) experiments showed an increase in average molecular weight for both films hydrated in saline solution at 37°C and the blood sacs utilized in electric total artificial hearts implanted in calves duo to the possible leaching of low molecular weight species and the chain extensions of residual free isocyanate groups. Correspondingly, hydration and implantation displayed an increase in mechanical strength. But excessive implantation for PDMS-modified PEUU blood sacs (such as over ∼100 day implantation) still caused possible decrease in average molecular weight and mechanical strength duo to more and more chemical degradation, just as observed in PEUU blood sacs without being modified by PDMS. Dynamical mechanical analysis (DMA) showed an increasing phase separation between hard and soft segments after immersion.
Green waterborne synthesis of hemocompatible polycarbonate–polyether polyurethanes

Dean-Jay Wang,Shan-hui Hsu

DOI: https://doi.org/10.1016/j.mtcomm.2024.109351

IF: 3.8

2024-06-01

Materials Today Communications

Abstract:Polyurethane (PU) is a family of biomedical elastomers with promising applications. In this study, we describe the synthesis of a novel waterborne PU with high solid content and low viscosity. The soft segment of the PU consists of polycarbonate diol (PCDL) and polytetramethylene ether glycol. Dimethylolbutanoic acid is used as a chain extender. To stabilize the emulsion in the synthetic process, nonionic groups (polyoxyethylene styrenated phenyl and polyoxyethylene tridecyl ethers) are used as surfactants. PUs with good hydrophilicity and proper hemocompatibility were successfully synthesized using this approach. The chemical composition of the PU was adjusted by changing the soft-to-hard segment ratio. The effects of this composition ratio on the crystallization properties of PU were characterized using differential scanning calorimetry, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, attenuated total reflectance infrared spectroscopy, thermogravimetric analysis, alternating magnetic field, and contact angle measurements. Film casts from PUs prepared in this study showed good mechanical properties, including Young's modulus (0.66–48 MPa), tensile strength (11.7–30.9 MPa), and strain at break (173%–579%). Moreover, introducing PCDL in the soft segment during preparation improved the microphase separation and reduced the water contact angle of the films, which enhanced the hydrophilicity of the PU. Our findings demonstrate the potential of the new waterborne PU formulation to significantly improve the performance and durability of biomaterials and blood-contacting devices. Furthermore, this formulation meets the required hemolytic standards, which supports its suitability for medical applications.

materials science, multidisciplinary
Synthesis, Characterization and Biomedical Properties of UV-Cured Polyurethane Acrylates Containing a Phosphorylcholine Structure.

Yihui Xu,Anxin Dong,Yufeng Zhao,Tao Zhang,Zhengsheng Jiang,Shasha Wang,Hong Chen

DOI: https://doi.org/10.1163/092050611X610315

2012-01-01

Abstract:In order to develop a simple, economical and rapid approach to incorporate 2-methacryloyloxyethyl phosphorylcholine (MPC) with other monomers without any solvent, we prepared a series of ultraviolet cured poly(urethane acrylate) (PUA) membranes containing different MPC content. Their chemical structure and surface properties were investigated by FT-IR, XPS, water swelling ratio and water contact angle measurement, while the biocompatibilities were evaluated through fibrinogen adsorptions, platelet adhesion and plasma recalcification time determination. The results demonstrate that the phosphorylcholine (PC) groups were successfully introduced into the PUA system by the UV-curing approach and the all PC-containing membranes showed better biocompatibility than those without PC moiety. The UV-curing method is potentially to be applied in the coating of medical devices which require biocompatibility and manufacturing efficiency. (C) Koninklijke Brill NV, Leiden, 2011
Investigating the structure and properties of polyurethane hydrogels with varying soft and hard segments

Hongxiu Wei,Xiaofei Wang,Wenkai Liu,Shuohong Dong,Tiancheng Dai,Feng Luo,Zhen Li,Hong Tan,Jiehua Li

DOI: https://doi.org/10.1002/pol.20240052

IF: 3.046

2024-05-31

Journal of Polymer Science

Abstract:In this study, polyurethane (PU) hydrogels were synthesized via mercapto curing reaction to elucidate the effect of molecular interactions between isocyanate and soft segments on the properties of hydrogels. Further, the mesh size, mechanical properties, hydrophilicity, and biological properties of the PU hydrogels were determined. In the isocyanate series, the structural regularity and rigidity of 4,4′‐dicyclohexylmethane diisocyanate (HMDI) favored the formation of hydrogel materials with small mesh size, high modulus, and low water absorption. In contrast, l‐lysine diisocyanate (LDI) favored the materials with large mesh size, low modulus, and good hydrophilicity. In the soft‐segment series, the strong hydrogen bonds of polycarbonate diol (PCDL) favored the formation of materials with small mesh size, dense cross‐link points, and high modulus, whereas weak hydrogen bonds of polytetrahydrofuran ether glycol (PTMG) favored the hydrogel materials with small mesh size, few crosslink points, and low modulus. PU hydrogels exhibit excellent cytocompatibility, anti‐cell adhesion, and anti‐inflammatory properties. Therefore, this study offers valuable insights into understanding the chain structure and macroscopic properties, thus contributing to preparing PU hydrogels with varying performances, as desired.

polymer science
Synthesis, phase behavior, and simulated in vitro degradation of novel HTPB-b-PEG polyurethane copolymers

Yan-Ling Luo,Yan Miao,Feng Xu

DOI: https://doi.org/10.1007/s13233-011-1211-3

IF: 2.127

2011-11-03

Macromolecular Research

Abstract:Two types of polyurethanes with alternating and random block architectures, hydroxyl-terminated liquid polybutadiene and poly(ethylene glycol) block copolymers (HTPB-alt-PEG and HTPB-co-PEG), were synthesized using a coupling reaction route between the hydroxyl groups and the isocyanate groups. The chemical and crystal structures were characterized using Fourier transform-infrared spectroscopy (FTIR) and X-ray diffraction, while phase behavior was examined using scanning electron microscopy (SEM) and differential scanning calorimetry. The biodegradation in a simulated human body fluid was investigated through mass loss, SEM, and FTIR. The experimental results indicated that all of the polyurethane samples bore the microphase separation structure, and the separation degree depended on the sequence structure and molecular weight (MW) of PEG and further affected their in vitro degradation. The driving force was related to the restricted movement of the molecular segments, the crystallization of the soft/hard phases, and/or the hydrogen bonding interactions between the hard segments. The surface morphological change of the degraded samples further demonstrated that the degradation became serious as the PEG MW increased and that the random block copolymers decomposed more easily than the alternating copolymers. The block polymer materials are expected to be incorporated into specific applications in related biomedical fields.

polymer science
Synthesizing Polyurethane Using Isosorbide in Primary Alcohol Form, and Its Biocompatibility Properties

Suk-Min Hong,Hyuck-Jin Kwon,Chil-Won Lee

DOI: https://doi.org/10.3390/polym15020418

2023-01-12

Abstract:Isosorbide is a bio-based renewable resource that has been utilized as a stiffness component in the synthesis of novel polymers. Modified isosorbide-based bis(2-hydroxyethyl)isosorbide (BHIS) has favorable structural features, such as fused bicyclic rings and a primary hydroxyl function with improved reactivity to polymerization when compared to isosorbide itself. Polyurethane series (PBH PU series) using polycarbonate diol (PCD) and bis(2-hydroxyethyl)isosorbide (BHIS) were polymerized through a simple, one-shot polymerization without a catalyst using various ratios of BHIS, PCD, and hexamethylene diisocyanate (HDI). The synthesized BHIS and PUs were characterized using proton nuclear magnetic resonance (1H-NMR), Fourier transform infrared (FT-IR), differential scanning calorimetry (DSC), and mechanical testing. To determine the feasibility of using these PUs as biomedical materials, we investigated the effects of their BHIS content on PBH PU series physical and mechanical properties. The PBH PU series has excellent elasticity, with a breaking strain ranging from 686.55 to 984.69% at a 33.26 to 63.87 MPa tensile stress. The material showed superb biocompatibility with its high adhesion and proliferation in the bone marrow cells. Given their outstanding mechanical properties and biocompatibility, the polymerized bio-based PUs can contribute toward various applications in the medical field.

Towards Formal Development of Programs from Algebraic Specifications: Model-Theoretic Foundations

Fluorescent Poly(hydroxyurethane): Biocompatibility Evaluation and Selective Detection of Fe(III)

Characterization, biodegradability and blood compatibility of poly[(R)-3-hydroxybutyrate] based poly(ester-urethane)s.

Risk factors for leptospirosis in metropolitan France: results of a national case-control study, 1999-2000.

Biodegradation of polycarbonate polyurethane

Synthesis and Biocompatibility of Anionic Polyurethane Nanoparticles Coated with Adsorbed Chitosan

Performance Study of Biodegradable Polyurethanes from Different Biodicarboxylic Acids and Their Potential Applications

The effect of PCL/PEG ABA block lengths on the crystallization of homo/block- based polyurethane/CNW nanocomposites

Effects of oligoethylene oxide monoalkyl(aryl) alcohol ether grafting on the surface properties and blood compatibility of a polyurethane.

Surface Immobilization of Bioactive Molecules on Polyurethane for Promotion of Cytocompatibility to Human Endothelial Cells

Defibrotide for the prevention of hepatic veno‐occlusive disease after hematopoietic stem cell transplantation: a systematic review

Polyurethane as smart biocoatings: Effects of hard segments on phase structures and properties

Synthesis, Characterization and Biocompatibility of Biodegradable Elastomeric Poly(ether-ester Urethane)s Based on Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) and Poly(ethylene Glycol) Via Melting Polymerization

The effect of differing types of cloth and of contamination by non-feed nitrogen on intestinal digestion estimates using porous synthetic-fibre bags in a cow

Influence of Quaternized Polyurethane Membrane Surfaces on Human Endothelial Cell Attachment and Growth

The in Vitro and in Vivo Stability of Poly(urethaneurea)s As Biomedical Materials

Green waterborne synthesis of hemocompatible polycarbonate–polyether polyurethanes

Synthesis, Characterization and Biomedical Properties of UV-Cured Polyurethane Acrylates Containing a Phosphorylcholine Structure.

Investigating the structure and properties of polyurethane hydrogels with varying soft and hard segments

Synthesis, phase behavior, and simulated in vitro degradation of novel HTPB-b-PEG polyurethane copolymers

Synthesizing Polyurethane Using Isosorbide in Primary Alcohol Form, and Its Biocompatibility Properties