5G-Enabled Smart Manufacturing -- A booklet by 5G-SMART

Leefke Grosjean,Krister Landernäs,Berna Sayrac,Ognjen Dobrijevic,Niels König,Davit Harutyunyan,Dhruvin Patel,Jose F. Monserrat,Joachim Sachs

DOI: https://doi.org/10.48550/arXiv.2209.10300

2022-09-21

Networking and Internet Architecture

Abstract:In this booklet the most important learnings and key results of 5G-SMART in the area of smart manufacturing are summarized.

What problem does this paper attempt to address?

Review of 5G capabilities for smart manufacturing

Joachim Sachs,Krister Landernäs

DOI: https://doi.org/10.48550/arXiv.2207.00417

2022-05-20

Networking and Internet Architecture

Abstract:5G has been defined to address new use cases beyond consumer-focused mobile broadband services. In particular industrial use cases, for example in smart manufacturing, have been addressed in the 5G standardization, so that 5G can support industrial IoT services and wireless industrial networking. To this end, 5G needs to integrate with the industrial network based on Ethernet and TSN. 5G can create new opportunities for smart manufacturing by enabling flexibility and increasing the automation in the production. This paper provides an overview of the use cases and requirements for smart manufacturing that can be addressed with 5G and which are validated in three industrial 5G trial systems. The capabilities of 5G are described for providing non-public networks that support industrial LAN services based on Ethernet and TSN. The 5G radio access network functionality is described and discussed for practical deployments. The paper provides an overview of the current state-of-the-art of using 5G for smart manufacturing.
A Look Inside 5G Standards to Support Time Synchronization for Smart Manufacturing

I. Gódor,M. Luvisotto,S. Ruffini,K. Wang,D. Patel,J. Sachs,O. Dobrijevic,D. P. Venmani,O. Le Moult,J. Costa-Requena,A. Poutanen,C. Marshall,J. Farkas

DOI: https://doi.org/10.1109/MCOMSTD.001.2000010

2022-05-20

Abstract:Connectivity has a major role in the current transformation of smart manufacturing. 5G is foreseen as an integral part of an end-to-end networking infrastructure supporting smart manufacturing operation. The integration of 5G with time-sensitive networking (TSN)is seen as a holistic communication solution for smart factories. The next generation of industrialization consists of real-time processes, automation, fixed and cellular networks, and high diversity of devices. The integration of fixed and cellular devices in a single infrastructure to enable end-to-end deterministic communications requires high accuracy of time synchronization. The transport technologies in fixed networks have been evolving toward TSN and deterministic networking to fulfill the requirements for industrial communications. The latest cellular specifications for 5G are targeting ultra-reliable and low-latency communications that enable the Industrial Internet of Things. This article describes the state of the art for integrating TSN with 5G networks based on the support given in 3GPP TS 23.501 Release 16. The requirements for time synchronization in factory automation and integration with 5G networks are presented, together with the most recent advancements in the standardization process.

Networking and Internet Architecture,Systems and Control
Wireless Communications for Smart Manufacturing and Industrial IoT: Existing Technologies, 5G and Beyond

Md Noor-A-Rahim,Jobish John,Fadhil Firyaguna,Hafiz Husnain Raza Sherazi,Sergii Kushch,Aswathi Vijayan,Eoin O'Connell,Dirk Pesch,Brendan O'Flynn,William O'Brien,Martin Hayes,Eddie Armstrong

DOI: https://doi.org/10.3390/s23010073

2022-12-21

Abstract:Smart manufacturing is a vision and major driver for change in today's industry. The goal of smart manufacturing is to optimize manufacturing processes through constantly monitoring, controlling, and adapting processes towards more efficient and personalised manufacturing. This requires and relies on technologies for connected machines incorporating a variety of computation, sensing, actuation, and machine to machine communications modalities. As such, understanding the change towards smart manufacturing requires knowledge of the enabling technologies, their applications in real world scenarios and the communication protocols and their performance to meet application requirements. Particularly, wireless communication is becoming an integral part of modern smart manufacturing and is expected to play an important role in achieving the goals of smart manufacturing. This paper presents an extensive review of wireless communication protocols currently applied in manufacturing environments and provides a comprehensive review of the associated use cases whilst defining their expected impact on the future of smart manufacturing. Based on the review, we point out a number of open challenges and directions for future research in wireless communication technologies for smart manufacturing.
Industry 4.0 and Beyond: The Role of 5G, WiFi 7, and TSN in Enabling Smart Manufacturing

Jobish John,Md. Noor-A-Rahim,Aswathi Vijayan,H. Vincent Poor,Dirk Pesch

2023-10-04

Abstract:This paper explores the role that 5G, WiFi-7, and Time-Sensitive Networking (TSN) can play in driving smart manufacturing as a fundamental part of the Industry 4.0 vision. The paper provides an in-depth analysis of each technology's application in industrial communications, with a focus on TSN and its key elements that enable reliable and secure communication in industrial networks. In addition, the paper includes a comparative study of these technologies, analyzing them based on a number of industrial use-cases, supported secondary applications, industry adoption, and current market trends. The paper concludes by highlighting the challenges and future directions for the adoption of these technologies in industrial networks and emphasizes their importance in realizing the Industry 4.0 vision within the context of smart manufacturing.

Networking and Internet Architecture
Learning Factory of 5G-based Plug-and-play Application in Manufacturing

Shulian Xie,Weimin Zhang,Jürgen Fleischer,Bernd Kuhlenkötter,Christopher Ehrmann,Christopher Prinz,Ziwei Jia,Weinan Cai

DOI: https://doi.org/10.2139/ssrn.3859819

2021-01-01

SSRN Electronic Journal

Abstract:The rise of 5th-Generation (5G) technology has provided great potential for the development of manufacturing industry. How to apply 5G technology in manufacturing industry has become a current hot topic. With the growth of personalized demands and the shortening of product life cycles, the flexibility of production model for Industry 4.0-oriented manufacturing has become an inevitable trend, and manufacturers need to be capable to quickly build or reconfigure new production systems to respond to market changes. Plug-and-play (PnP) of functional units is the basic guarantee to realize the rapid set-up and reconfiguration of production systems, where the construction of the Industrial Internet of Things (IIoT) and Cyber-Physical Systems (CPS) is one of the key problems to be solved. Therefore, the use of 5G technology to realize the agile and real-time transmission of large amounts of data, combined with the standard modular design to achieve the PnP of functional units, and construct IIOT and CPS, will be able to fully stimulate the development potential of future manufacturing industry. The Advanced Manufacturing Technology Center (AMTC) at Tongji University (Shanghai, China) carried out Learning Factory (LF) design and implementation of 5G-based PnP application, in order to provide application scenarios for the rapid establishment and operation of production systems. In addition, the AMTC developed use cases on demand for research, and cultivate students` knowledge and skills related to 5G and PnP in manufacturing industry. This paper introduces the environment and training process design of the LF in detail, as well as the current progress of implementation case in AMTC.
Optimization of 5G Networks for Smart Logistics

Emil Jatib Khatib,Raquel Barco

DOI: https://doi.org/10.3390/en14061758

IF: 3.2

2021-03-22

Energies

Abstract:Industry 4.0 is generalizing the use of wireless connectivity in manufacturing and logistics. Specifically, in Smart Logistics, novel Industry 4.0 technologies are used to enable agile supply chains, with reduced management, energy and storage costs. Cellular networks allow connectivity throughout all the scenarios where logistics processes take place, each having their own challenges. This paper explores such scenarios and challenges, and proposes 5G technology as a global unified connectivity solution. Moreover, this paper proposes a system for exploiting the application-specific optimization capabilities of 5G networks to better cater for the needs of Smart Logistics. An application traffic modeling process is proposed, along with a proactive approach to network optimization that can improve the Quality of Service and reduce connectivity costs.

energy & fuels
Design of a 5G Ready and Reliable Architecture for the Smart Factory of the Future

Mathias Strufe,Michael Gundall,Hans D. Schotten,Christian Markwart,Rakash S. Ganesan,Markus Aleksy

DOI: https://doi.org/10.48550/arXiv.1906.00740

2019-05-13

Networking and Internet Architecture

Abstract:The increasing demands for highly individual products as well as for flexible production lines represent new challenges. To address these demands, future plants must be highly flexible and dynamically reconfigurable. Current systems are usually based on wired technologies for the connection of sensors, actuators, and controlling or monitoring devices that allow only very limited dynamics. New applications, such as the use of robots, drones, or reconfigurable production lines, require the exploitation of wireless communication technologies. However, current technologies are not able to meet the high requirements in terms of latency, robustness, resilience and data rate. The introduction of the 5th generation (5G) cellular communication system will meet these requirements for the first time. Besides the use of radio-based solutions in new plants - so-called greenfield scenarios - deploying 5G also represents an efficient migration of existing plants - so-called brownfield scenarios - to Industry 4.0. In order to ensure that the challenging requirements are indeed meet in practical deployments of the new 5G technology, a tailor-made architecture is being developed within the Tactile Internet 4.0 (TACNET 4.0) project. As a basis for the design of the architecture, representative Industry 4.0 application scenarios, which are also be considered by the 3rd Generation Partnership Project (3GPP), were analyzed and compliance with the latest developments in the relevant standardization is also our target. The paper gives an overview of the considered use cases as well as the relevant reference architectures and the design process of the TACNET 4.0 architecture.
Research on key technologies of service quality optimizationfor industrial IoT 5G network for intelligent manufacturing

Yeping Chu,Lin Pan,Kaijun Leng,Han-Chi Fu,Anthony Lam

DOI: https://doi.org/10.1007/s00170-019-04389-4

IF: 3.563

2019-09-14

The International Journal of Advanced Manufacturing Technology

Abstract:5G and industrial IoT are both cutting-edge technologies today. Although they serve the communications and industrial sectors separately, the relevance of technology will still make them closely related. Intelligent manufacturing industry IoT relies on high-speed developed Internet technology. The high-performance 5G network will greatly promote the rapid development of Internet applications and will also have a profound impact on the application of industrial Internet of Things. Based on the technology and application characteristics of industrial Internet of Things and 5G communication system, this paper analyzes the development status of industrial IoT applications based on 5G environment and analyzes how to improve the quality of 5G network technology of industrial Internet of Things. System and intelligent manufacturing industrial IoT applications provide some helpful help.
5G in digital supply chain and operations management: fostering flexibility, end-to-end connectivity and real-time visibility through internet-of-everything

Alexandre Dolgui,Dmitry Ivanov

DOI: https://doi.org/10.1080/00207543.2021.2002969

IF: 9.018

2021-11-21

International Journal of Production Research

Abstract:5G technology enables end-to-end connectivity in real time at a highly granular level along with the associated end-to-end visibility through the Internet-of-Everything. While some potential benefits of 5G for digital supply chain and operations management have been declared, literature is still silent about theoretical underpinning and structured conceptualisation of application areas, underlying implementation challenges, and the role of 5G in future transformations of value creation. This paper aims to offer some directions of how to close this research gap. We organise the discussion around five major capabilities of the digital supply chain and smart operations which can be enhanced by 5G, i.e. intelligence, visibility, transparency, dynamic networking, and connectivity. We delineate possible future research topics related to 5G in different areas of Industry 4.0-driven, digital supply chain and operations management which can be useful for researchers and practitioners alike when seeking to understand the impact of 5G on both short-term and long-term time scales. Our analysis encompasses both operational processes (e.g. transformations of manufacturing and warehouse operations by end-to-end connectivity of devices) and strategic perspectives (e.g. transformations of business models and supply network structures through end-to-end real-time visibility and connectivity of industry, public infrastructure, and consumers). Finally, cost-benefits trade-offs are discussed.

engineering, manufacturing, industrial,operations research & management science
Manufacturing Grid: Definition, Architecture and Key Technologies

叶作亮,顾新建

DOI: https://doi.org/10.3969/j.issn.1002-137x.2009.03.004

2009-01-01

Computer Science

Abstract:Through analyzing Grid technology,the progress and future of Networked manufacturing,and the advance of Manufacturing gird (MG) study,the definition of MG was proposed and the meaning was described in detail,the architecture of MG was built and key issues were presented.Then three type manufacturing resources—information resource,software resource and Part-library resource—were discussed from acquisition,integration and sharing.Finally,the main problem was pointed out in current study.
Understanding 5G technology for future supply chain management

Ianire Taboada,Himanshu Shee

DOI: https://doi.org/10.1080/13675567.2020.1762850

2020-05-12

International Journal of Logistics Research and Applications

Abstract:The high bandwidth and low latency features of 5G network are perceived to offer a unified platform for multiple device connectivity in real time. Despite the promising benefits of disruptive 5G wireless technology, literature on 5G-enabled supply chain management is scarce. The paper, therefore, explores the role of 5G and its impact on supply chain management through a systematic literature review. Various aspects of 5G technologies in an environment of Industry 4.0, Supply Chain 4.0 and supply chain processes are discussed. Bibliometric results reveal that 5G-enabled supply chain management is a very recent topic and published in a very limited way. We find that most studies have focussed on technical features of emerging 5G and its impact being conceptualised on Industry 4.0 and Supply Chain 4.0. Areas of future supply chain management research that can support 5G are discussed.
Integration Application of 5G and Smart Grid

Sachula Meng,Zhihui Wang,Mingwei Tang,Sai Wu,Xu'an Li

DOI: https://doi.org/10.1109/wcsp.2019.8927874

2019-01-01

Abstract:With the development of smart grids, existing power private networks fell short of the demanding requirements of industrial applications, especially with respect to bandwidth, end to end latency, and reliability. Combining with vertical industry is a major development direction of 5G mobile communication technology, while its communication capacity of large bandwidth, low latency, high reliability as well as massive connection is matched with the service requirements of smart grid service. How to apply 5G to smart grid is widely concerned. This article is a survey of the related technologies about convergence application of 5G and smart grid. It first reviews the update of the 5G physical layer technologies, which support for realizing the communication requirements of the 5G application scenarios. Then it introduces the key technologies such as 5G mobile edge computing, computational caching and network slicing, which is the basis for 5G to support vertical multi-service networks and meet different service requirements. Finally, it presents several network slicing logic architectures of the access network, transmission network and core network which are matched with power service.
Smart manufacturing enabled by intelligent technologies

Yuqian Lu,Lihui Wang,Aydin Nassehi,Jiafu Wan

DOI: https://doi.org/10.1080/0951192x.2023.2296185

IF: 4.1

2024-01-20

International Journal of Computer Integrated Manufacturing

Abstract:Rapidly evolving global initiatives highlighted a manufacturing future that is connected, smart, resilient, human-centric, and sustainable for producing high-value-added products and services. Manufacturing systems, therefore, must change: (1) new manufacturing control strategies are required to enable flexible production of heterogeneous manufacturing jobs at dynamic batch sizes with mass efficiency; (2) factories need to be resilient and self-organizing to adapt to disruptions in customer demands, factory conditions and supply chain changes; and (3) machines need to be sympathetic with its operators, to name a few.

engineering, manufacturing,computer science, interdisciplinary applications,operations research & management science
Smart Reconfigurable Manufacturing: Literature Analysis

Xingyu Li,Ragu Athinarayanan,Baicun Wang,Wei Yuan,Quan Zhou,Martin Jun,Jose Bravo,Robert X Gao,Lihui Wang,Yoram Koren

DOI: https://doi.org/10.1016/j.procir.2023.09.228

2024-01-01

Procedia CIRP

Abstract:Smart manufacturing (SM) enhances the competitiveness of manufacturing companies by promoting automation and overall equipment effectiveness (OEE), targeting to produce 100% qualified products fully automatically. One of the key challenges to the SM initiatives is the continuous demand fluctuations in the specification and quantity, especially when a new product variant comes to the production line. Reconfigurable manufacturing (RM) system provides cost-effective, rapid response to abrupt market changes. It provides a solution by its flexibility in repurposing tools, adding machines, and modifying software to rapidly respond to changing demands at low unit costs. The ability of SM technologies through self-programming and cloud computation may significantly complements RM initiatives. There is increasing evidence that SM and RM may augment each other through their complementary strengths, leading to the new paradigm of smart reconfigurable manufacturing (SRM). To highlight the complementary strengths, this paper investigates the converging trend of RM and SM based on natural language processing, e.g., topic modeling and semantic embedding. Key characteristics and industrial use cases are subsequently summarized to systematically delineate the new SRM paradigm and illustrate its advantages and feasibility in practice.
Smart Manufacturing for Smart Cities—Overview, Insights, and Future Directions

Manu Suvarna,Lennart Büth,Johannes Hejny,Mark Mennenga,Jie Li,Yen Ting Ng,Christoph Herrmann,Xiaonan Wang

DOI: https://doi.org/10.1002/aisy.202000043

IF: 7.298

2020-01-01

Advanced Intelligent Systems

Abstract:With ‘smart’ being the order of the day, the shift in the landscape of a typical production‐oriented manufacturing environment to a more data‐oriented, automated and smart manufacturing is imminent. However, what is meant by smart manufacturing? And how can smart manufacturing contribute to a bigger picture by acting as enablers of smart cities? Given the paucity in literature that seeks to make sense in this direction, herein, first, six indices that represent or define a smart city are identified. Then, a holistic perspective of smart manufacturing is presented by collectively dwelling into the concepts of cyber physical production systems (CPPS) and industrial symbiosis—the recent and ongoing developments, applications, and relevant examples. In each subsequent section, the Review addresses how smart manufacturing contributes to smart cities, not just from a technology perspective, but also by satisfying the ergonometric factors and sustainability issues which are equally important indices that make up a smart city. A brief overview of Singapore as a smart nation and smart manufacturing hub is presented toward the end, along with highlights of a real‐world smart manufacturing platform called the Model Factory and its relevant modules.
Smart Manufacturing and Tactile Internet Based on 5G in Industry 4.0: Challenges, Applications and New Trends

Dimitris Mourtzis,John Angelopoulos,Nikos Panopoulos

DOI: https://doi.org/10.3390/electronics10243175

IF: 2.9

2021-12-20

Electronics

Abstract:For many applications deployed in manufacturing networks, communication latency has been a significant barrier. Despite the constant development of improved communication protocols and standards during Industry 4.0, the latency problem persists, lowering quality of services (QoS) and quality of experience (QoE). Tactile internet (TI), with its high availability, security, and ultra-low latency, will add a new dimension to human-machine interaction (HMI) by enabling haptic and tactile sensations. The tactile internet (TI) is a cutting-edge technology that uses 5G and beyond (B5G) communications to enable real-time interaction of haptic data over the internet between tactile ends. This emerging TI technology is regarded as the next evolutionary step for the Internet of Things (IoT) and is expected to bring about massive changes towards Society 5.0 and to address complex issues in current society. To that end, the 5G mobile communication systems will support the TI at the wireless edge. As a result, TI can be used as a backbone for delay mitigation in conjunction with 5G networks, allowing for ultra-reliable low latency applications like Smart Manufacturing, virtual reality, and augmented reality. Consequently, the purpose of this paper is to present the current state of 5G and TI, as well as the challenges and future trends for 5G networks beyond 2021, as well as a conceptual framework for integrating 5G and TI into existing industrial case studies, with a focus on the design aspects and layers of TI, such as the master, network, and slave layers. Finally, the key publications focused on the key enabling technologies of TI are summarized and the beyond 5G era towards Society 5.0 based on cyber-physical systems is discussed.

engineering, electrical & electronic,computer science, information systems,physics, applied
Smart manufacturing: Past research, present findings, and future directions

Hyoung Seok Kang,Ju Yeon Lee,SangSu Choi,Hyun Kim,Jun Hee Park,Ji Yeon Son,Bo Hyun Kim,Sang Do Noh

DOI: https://doi.org/10.1007/s40684-016-0015-5

2016-01-01

Abstract:Today, the manufacturing industry is aiming to improve competitiveness through the convergence with cutting-edge ICT technologies in order to secure a new growth engine. Smart Manufacturing, which is the fourth revolution in the manufacturing industry and is also considered as a new paradigm, is the collection of cutting-edge technologies that support effective and accurate engineering decision-making in real time through the introduction of various ICT technologies and the convergence with the existing manufacturing technologies. This paper surveyed and analyzed various articles related to Smart Manufacturing, identified the past and present levels, and predicted the future. For these purposes, 1) the major key technologies related to Smart Manufacturing were identified through the analysis of the policies and technology roadmaps of Germany, the U.S., and Korea that have government-driven leading movements for Smart Manufacturing, 2) the related articles on the overall Smart Manufacturing concept, the key system structure, or each key technology were investigated, and, finally, 3) the Smart Manufacturing-related trends were identified and the future was predicted by conducting various analyses on the application areas and technology development levels that have been addressed in each article.

engineering, mechanical, manufacturing,green & sustainable science & technology
Application of Internet of Things in Smart Factories under the Background of Industry 4.0 and 5G Communication Technology

Zhifeng Diao,Fanglei Sun

DOI: https://doi.org/10.1155/2022/4417620

IF: 1.43

2022-08-28

Mathematical Problems in Engineering

Abstract:The key identification element of the smart factory is the interconnection between devices, which solves the production method and development dilemma of the factory under Industry 3.0 and previous models. The new article published by Xinhua News Agency on January 16, 2022, advocates the idea of industry+ Internet, and its main goal is to realize intelligent production. At present, smart factories have become the main development direction of industrial enterprises in the world. 5G technology has been rapidly deployed with the development of mobile communication, and its performance has also been greatly improved compared to previous communication technologies. After China put forward the smart manufacturing 2025 plan, although a large number of enterprises are still lingering in the process of research, learning, and exploration, the idea of Industry 4.0 has taken root in various intelligent manufacturing enterprises, and the development route of Chinese manufacturing enterprises in the future has been ahead of schedule. Direction. Based on the basic theory of Industry 4.0, 5G wireless communication, Internet of Things, and smart factories, this paper firstly distributed questionnaires to 20 enterprises with smart factories by means of network and interview and reanalyzed the collected questionnaires by regression analysis method and then used the questionnaire scale analysis method to analyze the reliability and validity of the questionnaire and combined with the results of the questionnaire analysis to analyze the problems existing in the current smart factory. Finally, based on the background of Industry 4.0 and 5G communication technology, combined with the Internet of Things technology, the development layout of the smart factory is designed; that is, based on the elliptic curve encryption algorithm, the signature mechanism of mutual trust of all electronic devices in the IoT smart factory is set to improve the smart factory.

engineering, multidisciplinary,mathematics, interdisciplinary applications
Architecture Integration of 5G Networks and Time-Sensitive Networking with Edge Computing for Smart Manufacturing

János Harmatos,Markosz Maliosz

DOI: https://doi.org/10.3390/electronics10243085

IF: 2.9

2021-12-11

Electronics

Abstract:Digitalization and networking are taking on an increasingly important role in manufacturing. Fifth Generation mobile networks (5G) allow us to wirelessly connect multiple assets in factories with guaranteed quality of service (QoS). A 5G non-public network (5G-NPN) realizes a dedicated network with secure communication within the factory. Time-sensitive networking (TSN) provides deterministic connectivity and reliability in local networks. Edge computing moves computing power near factory locations, reducing the latency of edge applications. Making production processes more flexible, more robust, and resilient induces a great challenge for integrating these technologies. This paper presents the benefits of the joint use of 5G-NPN, TSN, and edge computing in manufacturing. To that end, first, the characteristics of the technologies are analyzed. Then, the integration of different 5G-NPN deployment options with edge (and cloud) computing is presented to provide end-to-end services. For enhanced reliability, ways of interworking between TSN and edge computing domains are proposed. Afterward, as an example realization of edge computing, the investigation on the capabilities of the Kubernetes container orchestration platform is presented together with the gap analysis for smart manufacturing requirements. Finally, the different integration options, interworking models, and Kubernetes-based edge computing are evaluated to assist smart factories to use these new technologies in combination in the future.

engineering, electrical & electronic,computer science, information systems,physics, applied

5G-Enabled Smart Manufacturing -- A booklet by 5G-SMART

Review of 5G capabilities for smart manufacturing

A Look Inside 5G Standards to Support Time Synchronization for Smart Manufacturing

Wireless Communications for Smart Manufacturing and Industrial IoT: Existing Technologies, 5G and Beyond

Industry 4.0 and Beyond: The Role of 5G, WiFi 7, and TSN in Enabling Smart Manufacturing

Learning Factory of 5G-based Plug-and-play Application in Manufacturing

Optimization of 5G Networks for Smart Logistics

Design of a 5G Ready and Reliable Architecture for the Smart Factory of the Future

Research on key technologies of service quality optimizationfor industrial IoT 5G network for intelligent manufacturing

5G in digital supply chain and operations management: fostering flexibility, end-to-end connectivity and real-time visibility through internet-of-everything

Manufacturing Grid: Definition, Architecture and Key Technologies

Understanding 5G technology for future supply chain management

Integration Application of 5G and Smart Grid

Smart manufacturing enabled by intelligent technologies

Smart Reconfigurable Manufacturing: Literature Analysis

Smart Manufacturing for Smart Cities—Overview, Insights, and Future Directions

Smart Manufacturing and Tactile Internet Based on 5G in Industry 4.0: Challenges, Applications and New Trends

Smart manufacturing: Past research, present findings, and future directions

Application of Internet of Things in Smart Factories under the Background of Industry 4.0 and 5G Communication Technology

Architecture Integration of 5G Networks and Time-Sensitive Networking with Edge Computing for Smart Manufacturing