Abstract:It is the hot issue for Li-organic battery that whether the higher specific surface area of the porous organic polymers as the electrode materials can benefit to the better battery performance. In this article, the conjugated polymer based on star-shaped benzene-thiophene structure (pBHT) and benzene-ethynyl-thiophene structure (pBAT and pBABT) were designed and successfully prepared. The pBHT polymer exhibits the unique stacked hollow tube morphology and possesses the high surface area (~1139 m2/g), while the polymers pBAT and pBABT both display the macroporous morphology with the low surface area (32.5 m2/g and 12.5 m2/g). Being explored for the battery performance as anode materials, the pBHT electrode exhibits a very low discharge capacity (<100 mAh g−1) and poor cycle's stability. In contrast, the pBABT electrode with very low surface area of only 12.5 m2/g displays the higher discharge capacity (442 mAh g−1 at 500 mA/g of the second cycle), excellent stability (401 mAh g−1 at 500 mA/g of the 1000 cycles) and higher rate capabilities. These uncommon electrochemical properties may be attributed to the unique hollow tube morphology for the polymer pBHT, which limit the lithium ion released and might form "dead lithium", thus resulting in the collapse of polymer structures and difficult solid electrolyte interface formation, as well as the fast capacity fading and extremely low capacity according to the electrochemical behaviors and SEM measurements. EIS also confirm the uncommon electrochemical properties with the three polymer electrodes from the kinetics for charge carrier insertion/extraction. Our findings may offer a clue to explore the effect of specific surface area and morphology of polymer electrodes on the performance of LIBs when designing the high-performance electrode materials.

Phthalocyanine Based Porous Organic Polymer for Lithium Ion Battery Anode

Conjugated Microporous Polymer Based on Star-Shaped Triphenylamine-Benzene Structure with Improved Electrochemical Performances As the Organic Cathode Material of Li-ion Battery

Conjugated Porous Polydiaminophenylsulfone–Triazine Polymer—A High-Performance Anode for Li-Ion Batteries

Porous, Hyper-cross-linked, Three-Dimensional Polymer as Stable, High Rate Capability Electrode for Lithium-Ion Battery

Organoboron-thiophene-based polymer electrodes for high-performance lithium-ion batteries

Superior lithium storage in Fe<sub>2</sub>O<sub>3</sub> nanoporous arrays endowed by surface phosphorylation and bulk phosphorous doping

Porphyrin‐Thiophene Based Conjugated Polymer Cathode with High Capacity for Lithium‐Organic Batteries

Porphyrin-based conjugated microporous polymers with dual active sites as anode materials for lithium-organic batteries

Multifunctional Porous Organic Polymer Anode with Desired Redox Potential and Capacity for High-Performance Aqueous Sodium-Ion and Ammonium-Ion Batteries

Graphdiyne-porphyrin composite materials GDY/Por and Por@GDY for lithium ion battery anodes

Triphenylamine‐Based Conjugated Microporous Polymers as the Next Generation Organic Cathode Materials

Porous Insulating Matrix for Lithium Metal Anode with Long Cycling Stability and High Power

A Porphyrin-Phenylalkynyl-Based Conjugated Organic Polymer as a High-Performance Cathode for Rechargeable Organic Batteries

Phosphonitrile Based Porous Organic Polymers as Effective Flame-Retardant Electrolytes for Lithium Battery

High-Performance PDB Organic Cathodes Reinforced by 3D Flower-like Carbon for Lithium-/Sodium-Ion Batteries

Imino-Linked Carbonyl-Enriched Polymer as a High-Performance Cathode Material for Lithium-Ion Batteries

Electrochemical Properties of a Multicarbonyl Polyimide Superstructure as a Hierarchically Porous Organic Anode for Lithium-Ion Batteries

Co‐Assembly of Polyoxometalates and Porphyrins as Anode for High‐Performance Lithium‐Ion Batteries

High-performance Li-organic battery based on thiophene-containing porous organic polymers with different morphology and surface area as the anode materials

Three-dimensional Porous Structure CoP/N-doped Carbon Nanospheres As Anode for Enhanced Lithium Storage Performance

Charge-Delocalized Triptycene-Based Ionic Porous Organic Polymers as Quasi-Solid-State Electrolytes for Lithium Metal Batteries