Abstract:Porous structure is an efficient tool for optimizing the elastic modulus and osseointegration properties of titanium alloy materials. However, the investigations on pore shape remain scarce. In this study, we created porous Ti6Al4V scaffolds with a pore size of 600 μm but different lattices (cubic pentagon, diamond, cuboctahedron). The mechanical and biological properties of the scaffolds were investigated in static simulation analysis, in vitro mechanical compression test, computational fluid dynamics, as well as cell and animal experiments. The results demonstrated that the calculated yield strength difference between the three Ti6Al4V porous scaffolds was negligible, at approximately 140 MPa, allowing them to match the strength requirements of human bones. The diamond scaffold has the lowest calculated elastic modulus (11.6 GPa), which is conducive for preventing stress shielding. The shear stress was largely concentrated in the diamond scaffold, and the stress range of 120–140 MPa accounted for the greatest share. The mouse MC3T3-E1 cells were found to attach to all three scaffolds, with the diamond scaffold displaying a higher degree of cell adherence. There was more proliferating cells on the diamond and cubic pentagon scaffolds than on the cuboctahedron scaffolds (P < 0.05). The diamond scaffold exhibited the highest alkaline phosphatase activity and calcium salt accumulation in cell differentiation tests. Besides, the expression of osteogenic genes on the diamond scaffold was higher than that on the cuboctahedron scaffold, the cubic pentagon scaffold displaying the lowest expression. The in vivo studies revealed that all three scaffolds fused well with the surrounding bone and that there was no loosening or movement of the prosthesis. Micro-computed tomography, corroborated by the staining results of hard tissues, revealed that the level of new bone formation was the highest in the diamond scaffold, followed by the cuboctahedron scaffold (P < 0.05). Taken together, the diamond scaffold is comparatively better at optimizing the elastic modulus and osseointegration properties of titanium alloy materials, and thus is a preferred choice for porous design.

Factors having influence on the rheological properties of Ti6A14V slurry

Effect of Foreign Ion Substitution and Micropore Tuning in Robocasting Single-Phase Bioceramic Scaffolds on the Physicochemical Property and Vascularization

Preparation, Characterization and Designing of Porous Ti–6Al–4V Through Metal Injection Molding Without Space Holder

Preparation and mechanical performance analysis of porous Ti6Al4V scaffold fabricated by direct ink writing

Study on the Fabrication of Porous TiAl Alloy Via Non-Aqueous Gel Casting of a TiH2 and Al Powder Mixture

Mechanical properties and in vitro cytocompatibility of dense and porous Ti–6Al–4V ELI manufactured by selective laser melting technology for biomedical applications

Post-Processing Treatment Impact on Mechanical Properties of SLM Deposited Ti-6Al-4 V Porous Structure for Biomedical Application

Evaluation of Treatment Effect and Mechanism Analysis of Ti6AL4V Porous Scaffolds Prepared by Selective Laser Melting with Different Chemical Polishing Processes

Influence of rheological behavior of aqueous Al2O3/nano-TiO2 slurry on the characteristics of powders prepared by spray pelletization

Fabrication of porous-Ti6Al4V alloy by using hot pressing technique and Mg space holder for hard-tissue biomedical applications

Microstructures and Properties of Porous TiAl-based Intermetallics Prepared by Freeze-Casting

Experimental Study of Performance of Ti-6Al-4V Femoral Implants Using Selective Laser Melting (SLM) Methodology

Porous Poly(L-Lactic Acid) Scaffold Reinforced by Titanium Dioxide Nanoparticles

Mechanical and Electrochemical Corrosion Behaviors of Porous Ti-6Al-4V Alloys Prepared by an Electrochemical Sintering Approach

Effect of Pore Size on the Physicochemical Properties and Osteogenesis of Ti6Al4V Porous Scaffolds with Bionic Structure

Surface Treatment Functionalization of Sodium Hydroxide Onto 3D Printed Porous Ti6Al4V for Improved Biological Activities and Osteogenic Potencies

Effect of lattice type on biomechanical and osseointegration properties of 3D-printed porous Ti6Al4V scaffolds

Improving osteoinduction and osteogenesis of Ti6Al4V alloy porous scaffold by regulating the pore structure

Microstructure and compression properties of 3D powder printed Ti-6Al-4V scaffolds with designed porosity: Experimental and computational analysis

Ti6Al4V biomimetic scaffolds for bone tissue engineering:Fabrication, biomechanics and osseointegration