Abstract:Background: Recent developments in alpha and beta emitting radionuclide therapy highlight the importance of developing efficient methods for patient-specific dosimetry. Traditional tabulated methods such as Medical Internal Radiation Dose (MIRD) estimate the dose at the organ level while more recent numerical methods based on Monte Carlo (MC) simulations are able to calculate dose at the voxel level. A precalculated MC (PMC) approach was developed in this work as an alternative to time-consuming fully simulated MC. Once the spatial distribution of alpha and beta emitters is determined using imaging and/or numerical methods, the PMC code can be used to achieve an accurate voxelized 3D distribution of the deposited energy without relying on full MC calculations. Purpose: To implement the PMC method to calculate energy deposited by alpha and beta particles emitted from the Ra-224 decay chain. Methods: The GEANT4 (version 10.7) MC toolkit was used to generate databases of precalculated tracks to be integrated in the PMC code as well as to benchmark its output. In this regard, energy spectra of alpha and beta particles emitted by the Ra-224 decay chain were generated using GAMOS (version 6.2.0) and imported into GEANT4 macro files. Either alpha or beta emitting sources were defined at the center of a homogeneous phantom filled with various materials such as soft tissue, bone, and lung where particles were emitted either mono-directionally (for database generation) or isotropically (for benchmarking). Two heterogeneous phantoms were used to demonstrate PMC code compatibility with boundary crossing events. Each precalculated database was generated step-by-step by storing particle track information from GEANT4 simulations followed by its integration in a PMC code developed in MATLAB. For a user-defined number of histories, one of the tracks in a given database was selected randomly and rotated randomly to reflect an isotropic emission. Afterward, deposited energy was divided between voxels based on step length in each voxel using a ray-tracing approach. The radial distribution of deposited energy was benchmarked against fully simulated MC calculations using GEANT4. The effect of the GEANT4 parameter StepMax on the accuracy and speed of the code was also investigated. Results: In the case of alpha decay, primary alpha particles show the highest contribution (>99%) in deposited energy compared to their secondary particles. In most cases, protons act as the main secondary particles in the deposition of energy. However, for a lung phantom, using a range cutoff parameter of 10 µm on primary alpha particles yields a higher contribution of secondary electrons than protons. Differences between deposited energy calculated by PMC and fully simulated MC are within 2% for all alpha and beta emitters in homogeneous and heterogeneous phantoms. Additionally, statistical uncertainties are less than 1% for voxels with doses higher than 5% of the maximum dose. Moreover, optimization of the parameter StepMax is necessary to achieve the best tradeoff between code accuracy and speed. Conclusions: The PMC code shows good performance for dose calculations deposited by alpha and beta emitters. As a stand-alone algorithm, it is suitable to be integrated into clinical treatment planning systems.

Neutron absorbed dose determination by calculations of recoil energy

New calculations of neutron kerma coefficients and dose equivalent.

Absorbed dose evaluation of Auger electron-emitting radionuclides: impact of input decay spectra on dose point kernels and S-values

Dosimetry at the Portuguese research reactor using thermoluminescence measurements and Monte Carlo calculations

Calculation of photoneutrons produced in the targets of electron linear accelerators for radiography and radiotherapy applications

Energy Spectrum of Primary Knock-on Atoms and Atomic Displacement Calculations in Metallic Alloys Under Neutron Irradiation

Calculated organ doses for Mayak production association central hall using ICRP and MCNP

The evaluation of neutron and gamma ray dose equivalent distributions in patients and the effectiveness of shield materials for high energy photons radiotherapy facilities

Thermal cross section of poly(2-hydroxyethyl methacrylate) hydrogels for neutron dose calculation

Calculation of response parameters for a neutron long counter instrument

Pencil beam kernel-based dose calculations on CT data for a mixed neutron-gamma fission field applying tissue correction factors

Monte Carlo simulation of semiconductor-based detector in mixed radiation field in the atmosphere

Low energy recoil detection with a spherical proportional counter

Dose Coefficient Calculation of External Exposure of Radionuclides Based on Chinese Reference Voxel Phantom

A deterministic partial differential equation model for dose calculation in electron radiotherapy

Development of a stand-alone precalculated Monte Carlo code to calculate the dose by alpha and beta emitters from the Ra-224 decay chain

The influence of nuclear models and Monte Carlo radiation transport codes on stray neutron dose estimations in proton therapy

Monte Carlo simulation for photon energy response from the RADOS dosemeter

Neutrons from fragmentation of light nuclei in tissue-like media: a study with GEANT4 toolkit

Study On The Mass Energy Relativities Of The Reaction Mechanisms In The Neutron Radiative Capture

The Sputtering of Radioactive Recoil Nuclides Induced by Fast Neutron