Abstract:To enhance the ionization yield of liquid argon time projection chambers (LArTPC) used in dark matter and neutrino experiments it was proposed the use of dopants in LAr, with ionization energies below the scintillation threshold of Ar. While dual-phase LArTPCs have excellent sensitivity to single ionization electrons, their compatibility with photosensitive dopants is hindered by gas-phase electroluminescence photons ionizing the dopants, leading to a positive feedback loop. This can be addressed by optically decoupling the gaseous and liquid phases with a barrier that transmits electrons. A possible solution relies on the use of a pair of structures based on Gaseous Electron Multipliers(GEMs) with misaligned holes. Rather than amplifying electron signals in gas pockets within their holes, their holes will be filled with LAr and a low biasing voltage, so that incident drifting electrons are drawn into the holes but not amplified. Instead, amplification will occur in the gas phase above the structures. Its core element is a GEM-like structure machined from polyethylene naphthalate(PEN). Since PEN scintillates in the visible spectrum, the risk of increased radioactivity due to the larger mass compared to traditional wire grids is negated by the potential to veto its own radioactivity. As such, these structures may also be a useful alternative to wire grids. In this work, we report the newest developments on the production of GEM-like structures using laser-based techniques, namely the manufacture of the first batch PEN and PMMA-based GEM-like structures. This process allows low-cost, reproducible fabrication of a high volume of such structures. In addition to being a low radioactive technique, we expect that it will allow the scaling up of the production of these structures at a reduced cost. First tests indicate good electrical stability, while the performance assessment is still ongoing.

R&D of Commercially Manufactured Large GEM Foils

Research and Development of Commercially Manufactured Large GEM Foils

Construction of a Triple-GEM Detector Using Commercially Manufactured Large GEM Foils

Progress on large area GEMs

Production and validation of industrially produced large-sized GEM foils for the Phase-2 upgrade of the CMS muon spectrometer

Techniques for mass production of large-sized GEM foil by the Korean CMS group for CMS phase-2 upgrade

The qualification of GEM detector and its application to imaging

Performance of the triple GEM detector built using commercially manufactured GEM foils in India

Making spherical GEMs

A perturbative determination of O(a) boundary improvement coefficients for the Schrödinger Functional coupling at 1-loop with improved gauge actions

Production and characterization of random electrode sectorization in GEM foils

First results of spherical GEMs

Impact of Single-Mask Hole Asymmetry on the Properties of GEM Detectors

Plasma-Based Etching Approach for GEM Detector Microfabrication at FBK for X-ray polarimetry in space

Stability tests performed on the triple GEM detector built using commercially manufactured GEM foils in India

Development of CGEM Technology for Ultra-light Tracking Detectors: the KLOE-2 Inner Tracker

A Novel Manufacturing Process for Glass THGEMs and First Characterisation in an Optical Gaseous Argon TPC

Production of GEM-like structures using laser-cutting techniques

R&D on GEM Detectors for Forward Tracking at a Future Electron-Ion Collider

Investigation and improvements of the mechanical structure of cylindrical GEMs for the BESIII experiment