Abstract:Mode division multiplexing technology (MDM) shows a bright prospect in the process of solving the capacity crisis, and mode converters play an important role in it. In recent years, how to excite higher-order modes with high efficiency, low insertion loss and low complexity has attracted much attention, but the problem of conversion between two higher-order modes to achieve higher-order mode excitation has been rarely discussed. In this paper, an efficient mutual conversion method between high-order angular core modes in few-mode fiber based on long period fiber gratings (LPFGs) is proposed and demonstrated. By presenting an optimizing refractive index modulation model, the coupling coefficients between fundamental mode and high-order core mode as well as that between different higher-order core modes are calculated in detail. Experimentally, LPFGs converting from LP11 to LP21, from LP21 to LP31, from LP31 to LP41 mode with conversion efficiencies of 95.6%, 95.2% and 94.7% and insertion losses of less than 0.15 dB are fabricated by using conventional CO2 laser side exposure methods, respectively. By adjusting polarization controllers, the selective excitation of LPl1 a/b(l = 2, 3, 4) modes and orbital angular momentum (OAM) modes of different topological charges (+/- 2, +/- 3, +/- 4) is realized, respectively. To the best of our knowledge, this is the first systematic investigated on mutual conversion between adjacent high-order core modes, and simultaneously achieve higher-order mode excitation up to l = 4 with high efficiency, high purity and low insertion loss. This work provides a possibility for data exchange in optical communication networks based on any high-order mode transformation in the future.

Selective higher order fiber mode excitation using a monolithic setup of a phase plate at a fiber facet

Optimization of Few-Mode-Fiber Based Mode Converter for Mode Division Multiplexing Transmission

Mode selective excitation techniques for few-mode fibers

Excitation of higher-order modes in optofluidic photonic crystal fiber

Selective Excitation and Coupling of High-Order Optical Modes of A Microstructured Optical Fiber by Using A Fiber-End Microtip

Mode-Selective Photonic Lanterns with Double-Clad Fibers

Manipulation of polarization topology using a Fabry-Pérot fiber cavity with a higher-order mode optical nanofiber

Coupled high-finesse optical Fabry-Perot microcavities

Optimal input excitations for suppressing nonlinear instabilities in multimode fibers

Fabrication and Characterization of a Mode-selective 45-Mode Spatial Multiplexer based on Multi-Plane Light Conversion

Focal-ratio-degradation (FRD) mitigation in a multimode fiber link using mode-selective photonic lanterns

Direct fiber excitation with a digitally controlled solid state laser source

Efficient Mutual Conversion of High-Order Core Mode in Few-Mode Fiber Employing Long Period Fiber Gratings

Optical Mode Control, Switching and Shaping In Few Mode Fiber Using a Fiber Piano

Ultrahigh Transverse Mode Purity by Enhanced Modal Filtering in Double‐Clad Single‐Ring Hollow‐Core Photonic Crystal Fiber

Controlled excitation and regulation of LP11a and LP11b modes based on long period gratings in a slightly elliptical core two-mode fiber

Demonstration of Mode-Switching in a Few-Mode Fiber using Electric Field Controlled Dynamic Off-Set Coupling

A low-loss photonic silica nanofiber for higher-order modes

Stable Single Transverse Mode Excitation in 50 Μm Core Fiber Using a Photonic-Lantern-based Adaptive Control System

High Finesse Fiber Fabry-Perot Cavities: Stabilization and Mode Matching Analysis

Design mode filtering interferometer using etched double clad fiber