Abstract:Supercritical CO2 can be used as a heat transfer fluid in a solar receiver, especially for a concentrating solar thermal power tower system. Such applications require better understanding of the heat transfer characteristics of supercritical CO2 in the solar receiver tube in a high temperature region. However, most of the existing experimental and numerical studies of the heat transfer characteristics of supercritical CO2 in tubes near the critical temperature region, and the corresponding heat transfer characteristics in the high temperature region are conducted. In this paper, a three-dimensional steady-state numerical simulation with the standard k-ε turbulent model is established by using ANSYS FLUENT for the flow and heat transfer of supercritical CO2 in a heated circular tube with an inner diameter of 6 mm and a length of 500 mm in the high temperature region. The effects of the fluid temperature (823–1023 K), the flow direction (horizontal, downward and upward), the pressure (7.5–9 MPa), the mass flux (200–500 kg·m–2·s–1) and the heat flux (100–800 kW·m–2) on the convection heat transfer coefficient and Nusselt number are discussed. The results show that the convection heat transfer coefficient increases while Nusselt number decreases nearly linearly with fluid temperature increasing. Both fluid direction and pressure have negligible effects on the convection heat transfer coefficient and Nusselt number. Moreover, the convective heat transfer coefficient and Nusselt number are enhanced greatly with the increasing of mass flux and the decreasing of heat flux, which is more obvious at a higher heat flux. The influences of buoyancy and flow acceleration on the heat transfer characteristics are also investigated. The buoyancy effect can be ignored within the present parameter range. However, the flow acceleration induced by the high heat flux significantly deteriorates the heat transfer preformation. Moreover, eight heat transfer correlations of supercritical fluid in tubes are evaluated and compared with the present numerical data. The comparison indicates that the correlations based on the thermal property modification show better performance in the heat transfer prediction in the high temperature region than those based on the dimensionless number modification. And Nusselt number predicted by the best correlation has a mean absolute relative deviation of 8.1% compared with the present numerical results, with all predicted data points located in the deviation bandwidth of ±20%. The present work can provide a theoretical guidance for the optimal design and safe operation of concentrating solar receivers where supercritical CO2 is used as a heat transfer fluid.

Optimization of a wavy-channel compact solar receiver with supercritical carbon dioxide

Volumetric Solar Carbon Dioxide Receiver Designs with Geometric Parameters Optimized in Combination

Optimization Method for the Porous Volumetric Solar Receiver Coupling Genetic Algorithm and Heat Transfer Analysis

Three-dimensional shape optimization of fins for application in compact supercritical CO 2 solar receivers

Study on the convective heat transfer characteristics of supercritical CO 2 in mini-channels under unilateral heating conditions for application in a compact solar receiver

Convective heat transfer characteristics of supercritical CO 2 in mini-channels of compact solar receivers under unilateral heating conditions

Multi-objective Optimization of a Solar Receiver Considering Both the Dimple/protrusion Depth and Delta-Winglet Vortex Generators

Thermal-fluid-mechanical analysis of tubular solar receiver panels using supercritical CO2 as heat transfer fluid under non-uniform solar flux distribution

Thermal performance and thermal stress analysis of a supercritical CO2 solar conical receiver under different flow directions

Tomography based pore-level structural optimization for reducing pressure drop of porous volumetric solar receiver

Optimization and performance evaluation of a high-temperature solar receiver for concentrated solar power applications

Experimental and Numerical Analysis of the Hydraulic and Thermal Performances of the Gradually-Varied Porous Volumetric Solar Receiver

Flow Field Optimization for the Solar Parabolic Trough Receivers in Direct Steam Generation Systems by the Variational Principle

Optimization of Thermo-Hydraulic Characteristics of Solar Cavity Receiver under Concentrated Heat Flux

Optimization of solar receivers for high-temperature solar conversion processes: Direct vs. Indirect illumination designs

Experimental Research on a New Mini-Channel Transcritical CO2 Heat Pump Gas Cooler

Numerical Investigation on Heat Transfer of Supercritical CO2 in Solar Receiver Tube in High Temperature Region

Thermal Analysis of a Solar Parabolic Trough Receiver Tube with Porous Insert Optimized by Coupling Genetic Algorithm and CFD

Numerical Study of New-Type Receiver with Axially-Hollow Spiral Deflector for Parabolic Trough Direct-Steam-Generation Loop of Concentrating Solar Power System

Multi-objective Optimizations of Solar Receiver Based on Deep Learning Strategy in Different Application Scenarios

Structural Optimization of the Inlet Header of Supercritical Carbon Dioxide Printed Circuit Board Heat Exchanger