Abstract:Purpose The pin fin is applied into a Lamilloy cooling structure which is broadly used in the leading edge region of the modern gas turbine vane. The purpose of this paper is to investigate effects of the layout, diameter and shape of pin fins on the flow structure and heat transfer characteristics in a newly improved Lamilloy structure at the leading edge region of a turbine vane. Design/methodology/approach A numerical method is applied to investigate effects of the layout, diameter and shape of pin fins on the flow structure and heat transfer characteristics in a newly improved Lamilloy structure at the leading edge of a turbine vane. The diverse locations of pin fins areLp= 0.35, 0.5, 0.65. The diameter of the pin fins varies from 8 mm to 32 mm. Three different ratios of root to roof diameter for pin fins are also investigated, i.e.k= 0.5, 1, 2. The Reynolds number ranges from 10,000 and 50,000. Results of the flow structures, heat transfer on the target surface and pin fin surfaces, and friction factor are studied. Findings The heat transfer on the pin fin surface gradually decreases and then increases as the location of the pin fins increases. Increasing the diameter of the pin fins causes the heat transfer on the pin fin surface to gradually increase, while a lower value of the friction factor occurs. Besides, the heat transfer on the pin fin surface at a small root diameter increases remarkably, but a slight heat transfer penalty is found at the target surface. It is also found that both the Reynolds analogy performance and the thermal performance are increased compared to the baseline whose diameter and normalized location of pin fins are set as 16 and 0.5 mm, respectively. Social implications The models provide a basic theoretical study to deal with nonuniformity of the temperature field for the turbine vane leading edge. The investigation also provides a better understanding of the heat transfer and flow characteristics in the leading edge region of a modern turbine vane. Originality/value This is a novel method to adopt pin fins into a Lamilloy cooling structure with curvature. It presents that the heat transfer of the pin fin surface in a pin-fin Lamilloy cooling structure with curvature can be significantly increased by changing the parameters of the pin fins which may lead to various flow behavior. In addition, the shape of the pin fin also shows great influence on the heat transfer and flow characteristics. However, the heat transfer of the target surface shows a small sensitivity to different layouts, diameter and shape of pin fin.

Thermal performance of cold plates with novel pin-fins designed using Bézier curves

Detailed Heat Transfer Measurements of Curved Fin Channels

Searching for Irregular Pin-Fin Shapes for High Temperature Applications Using Deep Learning Methods

Numerical Study on Flow and Heat Transfer Characteristics of Pin-Fins with Different Shapes

On The Heat Transfer Characteristics Of A Lamilloy Cooling Structure With Curvatures With Different Pin Fins Configurations

Systematic Comparison on Convective Heat Transfer Characteristics of Several Pin Fins for Turbine Cooling

Effect of Square Pin-Fin Twist on Thermo-Hydraulic Performance of a Rectangular Channel in Forced Convection

Numerical Study of a Novel Curved Pin Fin for Heat Transfer Enhancement Within Aeroengine Turbine Blade

Effect of shape and distribution of pin-fins on the flow and heat transfer characteristics in the rectangular cooling channel

An experimental and numerical study of flow and heat transfer in channels with pin fin-dimple and pin fin arrays

Heat Transfer And Pressure Loss Characteristics Of Pin-Fins With Different Shapes In A Wide Channel

Experimental and Numerical Investigation of Hydrothermal Performance of a Microchannel Heat Sink with Pin Fins

Numerical and experimental analysis of cooling performance of single-phase array microchannel heat sinks with different pin-fin configurations

A Numerical Comparison of Thermal Performance of In-Line Pin–fins in a Wedge Duct with Three Kinds of Coolant

Numerical Study on Heat Transfer Performance of a New-proposed Pin-fin in an Internal Channel

Experimental Investigation of Innovative Internal Trailing Edge Cooling Configurations with Pentagonal Arrangement and Elliptic Pin Fin

Effects of pin fin configurations on heat transfer and friction factor in an improved lamilloy cooling structure

Experimental and Numerical Study of Turbulent Flow and Heat Transfer in a Wedge-shaped Channel with Guiding Pin Fins for Turbine Blade Trailing Edge Cooling

Experimental and Numerical Study on Thermofluidic Characteristics of Microchannel Heat Sinks with Various Micro Pin–fin Arrays Arrangement Patterns

Study on Flow and Heat Transfer Characteristics in Rectangular Channels with Lantern-Shaped Pin Fin Array: Part I- Effect of Sphere Diameter

EFFECTS OF VARIOUS COOLANTS ON FLOW AND HEAT TRANSFER CHARACTERISTICS IN A ROUND-TIP PIN-FINNED INTERNAL CHANNEL