Abstract:The demands for high flexibility in signal phase modulation, operating frequency, and amplitude modulation in contemporary wireless communication systems present challenges for reconfigurable devices, to address this issue, two tunable couplers have been designed, which consist of two parallel microstrips couplers with one-eighth wavelength and phase-shift networks composed of two varactors and coupling lines. Adjusting the even-odd mode impedances of one-eighth wavelength parallel coupled microstrip lines has been established as a means to control the coupling. The alteration of the capacitance of the varactors allows for manipulation of the phase differences in the couplers. Considering the disparities among simulation, manufacturing, and theoretical models, to get the capacitance combinations corresponding to the specific phase differences more quickly and accurately, the linear programming solve-predict method is introduced to this design. Finally, the errors between the predicted values and the theoretical values for the actual values are compared. The relative errors of the theoretical values are not less than 31.76%, and the maximum errors of the predicted values are not more than 12.5%, which shows the effectiveness of the method. For demonstration, two couplers operating at 2.4 GHz with different tuning ranges were designed and fabricated, work -1 with a tuning range of 45°-135° and work -2 with a tuning range of 0°-180° degrees. Based on the standard of 10dB return loss and 1dB unbalanced coupling, the relative bandwidths of work -1 and work -2 are not less than 42% and 25%. The relative bandwidths of phase differences effective modulation (±5°) are 20.1% ∼ 42% and 6% ∼ 25%, respectively.

Multipacting Simulations of Tuner-adjustable waveguide coupler (TaCo) with CST

Accurate Evaluation of Transmission Line Model at Higher Frequencies for Characterising Field-to-Wire Coupling of Coated Twisted-Wire Pair with a Grounded Conductor

Research of Coupling Coefficient Extraction of a Cavity Resonator

A Dual-Band Coupled-Line Coupler with an Arbitrary Coupling Coefficient

Electrical–Thermal Cosimulation of Coaxial TSVs with Temperature-Dependent MOS Effect Using Equivalent Circuit Models

Tuning of a Tapered Ridge-Loaded Waveguide Coupler for a Drift Tube Linac of the Compact Pulsed Hadron Source

COMPARISON OF MEASURED AND CALCULATED COUPLING BETWEEN A WAVEGUIDE AND AN RF CAVITY USING CST Microwave Studio

Linear Programming Solve-predict for Tunable Couplers with Coupling and Phase Differences

A Coaxial Hom Coupler for A Superconducting Rf Cavity and Its Low-Power Measurement Results

DESIGN AND SIMULATION OF THE WAVEGUIDE COUPLER FOR THE CAVITY BEAM MONITOR

Design of the Input Power Coupler for Boron Neutron Capture Therapy Drift Tube Linac

Design and Analysis of a TE-TEM-TE Co-coaxial Coupling Structure for Multilayer Rectangular SIW

Modeling and Analysis of T-coils with Improved Quality Factor by Patterned Floating/Ground Shields in Millimeter-Wave Regime

Comparative Simulation Studies of Multipacting in Higher-Order-Mode Couplers of Superconducting Rf Cavities

Design And Development Of Ferroelectric Tunable Coplanar Waveguide Components For Ku- And K-Band Applications

Design of the Coupler for Millimeter-Wave Space TWT

Effective Numerical Simulations of Multipactor by WBPAT Theory

A Multi-Octave Millimeter-Wave Power Combiner Using Rectangular Coaxial Transmission Line

Novel Compact Coupler With Tunable Frequency, Phase Difference, and Power-Dividing Ratio

Design and Simulation of Coupling Slot Tuning Structure of Two-Gap Coupled Cavity

Design of a tunable turnstile mode converter for high-power microwave applications