Abstract:Advanced gravitational wave detectors use suspended test masses to form optical resonant cavities for enhancing the detector sensitivity. These cavities store hundreds of kilowatts of coherent light and even higher optical power for future detectors. With such high optical power, the radiation pressure effect inside the cavity creates sufficiently strong coupling between test masses whose dynamics are significantly altered. The dynamics of two independent nearly free masses become a coupled mechanical resonator system. The transfer function of the local control system used for controlling the test masses is modified by the radiation pressure effect. The changes in the transfer function of the local control systems can result in a new type of angular instability which occurs at only 1.3 \% of the Sidles-Sigg instability threshold power. We report experimental results on a 74~m suspended cavity with a few kilowatts of circulating power, for which the power to mass ratio is comparable to the current Advanced LIGO. The radiation pressure effect on the test masses behaves like an additional optical feedback with respect to the local angular control, potentially making the mirror control system unstable. When the local angular control system is optimized for maximum stability margin, the instability threshold power increases from 4~kW to 29~kW. The system behavior is consistent with our simulation and the power dependent evolution of both the cavity soft and hard mode is observed. We show that this phenomenon is likely to significantly affect proposed gravitational wave detectors that require very high optical power.

Suppression of parametric oscillatory instability in third generation gravitational wave detectors

Parametric Instability in Long Optical Cavities and Suppression by Dynamic Transverse Mode Frequency Modulation

Thermal modulation for suppression of parametric instability in advanced gravitational wave detectors

Suppression of Parametric Instabilities in Future Gravitational Wave Detectors Using Damping Rings

Designing Arm Cavities Free of Parametric Instability for Gravitational Wave Detectors

Strategies for the control of parametric instability in advanced gravitational wave detectors

Parametric Oscillatory Instability in Fabry-Perot (FP) Interferometer

Study of Parametric Instability of gravitational wave detectors using silicon test masses

Preliminary Investigation on A Passive Method for Parametric Instability Control in Advanced Gravitational Wave Detectors

Preventing Transient Parametric Instabilities in High Power Gravitational Wave Detectors Using Thermal Transient Compensation

Parametric Instabilities and Their Control in Advanced Interferometer Gravitational-Wave Detectors

Mitigation of Parametric Instability

Resonant behavior and stability of a linear three-mirror cavity

Observation of Three-Mode Parametric Instability

Optimization of parameters and the ultimate sensitivity of interferometric detectors of gravitational waves

Parametric instabilities in the LCGT arm cavity

Angular instability in high optical power suspended cavities

Demonstration of the parametric instability suppression through optical feedback

Comparison of Parametric Instabilities for Different Test Mass Materials in Advanced Gravitational Wave Interferometers

Thermal Tuning the Optical Cavity for 3 Mode Interaction Studies Using A Co2 Laser

Observation of Enhanced Optical Spring Damping in a Macroscopic Mechanical Resonator and Application for Parametric Instability Control in Advanced Gravitational-Wave Detectors