Abstract:Advanced gravitational wave detectors use suspended test masses to form optical resonant cavities for enhancing the detector sensitivity. These cavities store hundreds of kilowatts of coherent light and even higher optical power for future detectors. With such high optical power, the radiation pressure effect inside the cavity creates sufficiently strong coupling between test masses whose dynamics are significantly altered. The dynamics of two independent nearly free masses become a coupled mechanical resonator system. The transfer function of the local control system used for controlling the test masses is modified by the radiation pressure effect. The changes in the transfer function of the local control systems can result in a new type of angular instability which occurs at only 1.3 \% of the Sidles-Sigg instability threshold power. We report experimental results on a 74~m suspended cavity with a few kilowatts of circulating power, for which the power to mass ratio is comparable to the current Advanced LIGO. The radiation pressure effect on the test masses behaves like an additional optical feedback with respect to the local angular control, potentially making the mirror control system unstable. When the local angular control system is optimized for maximum stability margin, the instability threshold power increases from 4~kW to 29~kW. The system behavior is consistent with our simulation and the power dependent evolution of both the cavity soft and hard mode is observed. We show that this phenomenon is likely to significantly affect proposed gravitational wave detectors that require very high optical power.

Thermal Tuning the Optical Cavity for 3 Mode Interaction Studies Using A Co2 Laser

Three mode interaction noise in laser interferometer gravitational wave detectors

Thermal modulation for suppression of parametric instability in advanced gravitational wave detectors

Three-mode Optoacoustic Parametric Interactions with a Coupled Cavity

Preventing Transient Parametric Instabilities in High Power Gravitational Wave Detectors Using Thermal Transient Compensation

Parametric Instability in Long Optical Cavities and Suppression by Dynamic Transverse Mode Frequency Modulation

Mode Selection in InGaAs/InGaAsP Quantum Well Photonic Crystal Lasers Based on Coupled Double-Heterostructure Cavities.

Observation of Three-Mode Parametric Instability

Radiation pressure excitation of test mass ultrasonic modes via three mode opto-acoustic interactions in a suspended Fabry-Perot cavity

Suppression of Thermal Transients in Advanced LIGO Interferometers Using CO 2 Laser Preheating

Designing Arm Cavities Free of Parametric Instability for Gravitational Wave Detectors

Three mode interactions as a precision monitoring tool for advanced laser interferometers

Parametric Instabilities and Their Control in Advanced Interferometer Gravitational-Wave Detectors

Spectroscopy of thermally excited acoustic modes using three-mode opto-acoustic interactions in a thermally tuned Fabry-Pérot cavity

Study of Parametric Instability of gravitational wave detectors using silicon test masses

Angular instability in high optical power suspended cavities

Suppression of Parametric Instabilities in Future Gravitational Wave Detectors Using Damping Rings

Analysis of High-Q Optical Microtoroid Cavity by CO2 Laser

Experimental Demonstrations of Alignment and Mode Matching in Optical Cavities with Higher-Order Hermite-Gauss Modes

Passive thermal fine-tuning of whispering gallery mode for nonlinear optics in a microcavity

Thermal distortions of non-Gaussian beams in Fabry-Perot cavities