An advanced ICMV for vibratory roller compaction

Johannes Pistrol,Mario Hager,Fritz Kopf,Dietmar Adam

DOI: https://doi.org/10.1007/s11440-024-02342-8

2024-05-08

Acta Geotechnica

Abstract:The compaction success of vibratory roller compaction can be assessed by systems for continuous compaction control (CCC) or intelligent compaction (IC) which calculate soil stiffness-proportional quantities based on measurements of the motion behavior of the vibrating drum. However, state-of-the-art intelligent compaction meter values (ICMV) do not only depend on the stiffness of the soil but are also strongly influenced by machine and process parameters. In this paper, the methodology for determining an advanced ICMV is presented, in which the mechanical properties of the soil, the process parameters and geometric relationships in the contact area between the drum and the soil are directly included in the calculation. The methodology is explained on the example of measurement data from a compaction test conducted on sandy gravel with a heavy single-drum roller. The results of the novel ICMV are compared with those of the most widely used IC systems.

engineering, geological

What problem does this paper attempt to address?

The focus of this paper is on the Intelligent Compaction (IC) issue of vibratory compactors during the process of soil compaction. The current IC Measurement Value (ICMV) not only relies on the hardness of the soil but is also strongly influenced by the machine and process parameters. A new advanced ICMV method is proposed in this study, which directly incorporates the mechanical properties of the soil, process parameters, and the geometric relationship between the drum and the soil contact area into the calculation.

The paper explains this new method through compaction test data on gravel using a heavy single-drum roller. The newly proposed ICMV is compared with the results of the widely used existing IC system. The study points out that the existing ICMV is influenced by various factors including soil conditions, operating parameters, and roller patterns, hence, a more accurate ICMV that reflects the hardness of the soil is needed.

The new concept of ICMV considers both soil mechanics and geometric parameters and has a direct physical correlation to reduce sensitivity to changes in roller and process parameters. It is determined through five steps, including measuring soil response, establishing a geometric model, applying the Kelvin-Voigt model, an optimal fitting process, and adjusting parameters to match the static load. The resulting new ICMV (Egeo) is considered to primarily reflect the hardness of the soil.

The experimental part describes on-site tests conducted in a gravel pit near Vienna in collaboration with HAMM AG. A HAMM single-drum roller was used in the tests, and relevant data was recorded for calculating the new ICMV.

In summary, this paper aims to improve the compaction control technology of vibratory compactors by evaluating the compaction status of the soil with a more precise ICMV, reducing interference from external factors, and enhancing construction efficiency and quality.