Abstract:The need to refuel future missions to Mars and the Moon via in situ resource utilization (ISRU) requires the development of LOX/LCH4 engines, which are complex and expensive to develop and improve. This paper discusses how the use of digital engineering—specifically physics-based modeling (PBM)—can aid in developing, testing, and validating a LOX/LCH4 engine. The model, which focuses on propulsion performance and heat transfer through the engine walls, was created using Siemens' STAR-CCM+ CFD tool. Key features of the model include Eulerian multiphase physics (EMP), complex chemistry (CC) using the eddy dissipation concept (EDC), and segregated solid energy (SSE) for heat transfer. A comparison between the complete GRI 3.0 and Lu's reduced combustion mechanisms was performed, with Lu's mechanism being chosen for its cost-effectiveness and similar output to the GRI mechanism. The model's geometry represents 1/8th of the engine's volume, with a symmetric rotational boundary. The performance of this engine was investigated using NASA's chemical equilibrium analysis (CEA) and STAR-CCM+ simulations, focusing on thrust levels of 125 lbf and 500 lbf. Discrepancies between theoretical predictions and simulations ranged from 1.4% to 28.5%, largely due to differences in modeling assumptions. While NASA CEA has a zero-dimensional, steady-state approach based on idealized conditions, STAR-CCM+ accounts for real-world factors such as multiphase flow, turbulence, and heat loss. For the 125 lbf case, a 9.2% deviation in combustion chamber temperature and a 15.0% difference in thrust were noted, with simulations yielding 113.48 lbf compared to the CEA's 133.52 lbf. In the 500 lbf case, thrust reached 488 lbf, showing a 2.4% deviation from the design target and an 8.6% increase over CEA predictions. Temperature and pressure deviations were also observed, with the highest engine wall temperature at the nozzle throat. Monte Carlo simulations revealed that substituting LNG for LCH4 affects combustion dynamics. The findings emphasize the need for advanced modeling approaches to enhance the prediction accuracy of rocket engine performance, aiding in the development of digital twins for the CROME.

Reusable Rocket Engine: Firing Tests and Lifetime Analysis of Combustion Chamber

Nitrous Oxide/Ethanol Cylindrical Rotating Detonation Engine for Sounding Rocket Space Flight

Turbopump Parametric Modelling and Reliability Assessment for Reusable Rocket Engine Applications

System Analysis of a Hydrocarbon-Fueled RBCC Engine Applied to a TSTO Launch Vehicle

Flight Demonstration of Detonation Engine System Using Sounding Rocket S-520-31: Performance of Rotating Detonation Engine

Some Aspects on Hydrocarbon-fueled RBCC Engines for a TSTO Launch Vehicle

Dynamic Characteristics of LOX/Kerosene Variable Thrust Liquid Rocket Engine Test System Based on General Modular Simulation Method

A sounding rocket as a test bench for cost effective measurements: Development of a sounding rocket demonstrator test bench for aerospace technologies and atmospheric measurements

Experimental validation of rotating detonation for rocket propulsion

Combustion Structure of a Cylindrical Rotating Detonation Engine with Liquid Ethanol and Nitrous Oxide

Thermal Performance Characteristics of an 80-Ton Variable-Thrust Liquid Engine for Reusable Launch Rockets

Dynamic reliability analysis for the reusable thrust chamber: A multi-failure modes investigation based on coupled thermal-structural analysis

Experimental and Numerical Investigations on the Ignition of RBCC Gas-Oxygen/Kerosene Rocket Ejector

Optimal Liquid Engine Architecture by Performance-Cooling Tradeoff Analysis

Design of Low-Cost Solid Propellant Engine Test Bench and Electronic Embedded System used for Small Rockets

Overview of reusable space systems with a look to technology aspects

Index allocation for a reusable LOX/CH4 rocket engine

Experimental Investigation of a Swirling-Oxidizer-Flow-Type Hybrid Rocket Engine Using Low-Melting-Point Thermoplastic Fuel and Oxygen

Liquid Rocket Engine Performance Characterization Using Computational Modeling: Preliminary Analysis and Validation

Analysis on Propulsive Performance of Hollow Rotating Detonation Engine with Laval Nozzle

Experimental Investigation on the Performance of Liquid Rocket Engine