Abstract:Dense environmental barrier coatings (EBCs) are urgently needed to protect SiC-based ceramic matrix composites (SiC CMCs) in future gas turbine engines, and multi-component rare-earth (Re) disilicates are attracting attention due to their excellent thermal-mechanical properties and chemical compatibility. In this paper, first-principles calculations were performed on ten different crystal structures and elastic constants of (Re0.5Yb0.5)2Si2O7 (ReSc, Y, Ho, Er, Tm, Yb, Lu) and (ScxYb1-x)2Si2O7 (x = 0, 0.25, 0.5, 0.75, 1.00) disilicate materials. Meanwhile, five bulk disilicate ceramics of Yb2Si2O7, (Sc0.5Yb0.5)2Si2O7, (Er0.5Yb0.5)2Si2O7, (Sc0.33Er0.33Yb0.34)2Si2O7, and (Sc0.25Ho0.25Er0.25Yb0.25)2Si2O7 were prepared and tested for thermal-mechanical properties. The prepared bulk ceramics exhibit superior thermal stability at 1823 K, with no phase transformation or grain coarsening occurring. Compared to Yb2Si2O7, (Sc0.5Yb0.5)2Si2O7 exhibits a smaller unit cell volume, average Re–O bond length, grain size, and thermal conductivity. It also shows increased ion mass disorder, lattice distortion, ion radius disorder, coefficient of thermal expansion (CTE), microhardness, and Young's modulus. However, (Er0.5Yb0.5)2Si2O7 mainly exhibits opposite behaviors. Most of the thermal-mechanical properties of (Sc0.33Er0.33Yb0.34)2Si2O7 and (Sc0.25Ho0.25Er0.25Yb0.25)2Si2O7 are intermediate between those of (Sc0.5Yb0.5)2Si2O7 and (Er0.5Yb0.5)2Si2O7. These findings of this study may accelerate the development of medium-entropy or high-entropy disilicates with controlled polymorphic phases and customized thermal-mechanical properties.

Improved thermal properties and CMAS corrosion resistance of rare-earth monosilicates by adjusting the configuration entropy with RE-doping

Improved thermophysical properties of rare-earth monosilicates applied as environmental barrier coatings by adjusting structural distortion with RE-doping

Thermal performance regulation of high‐entropy rare‐earth disilicate for thermal environmental barrier coating materials

Improved thermal properties and CMAS corrosion resistance of high-entropy RE zirconates by tuning fluorite-pyrochlore structure

Investigation on improving corrosion resistance of rare earth pyrosilicates by high-entropy design with RE-doping

First-principles calculations and thermal-mechanical experimental studies on middle-entropy rare-earth disilicates

Investigation on the relation of microstructures and CMAS corrosion resistance of high entropy RE disilicates

Contributions of bonding heterogeneity to mechanical and thermal properties of rare earth molybdates for thermal barrier coatings

Effect of lattice distortion in high-entropy RE2Si2O7 and RE2SiO5 (RE=Ho, Er, Y, Yb, and Sc) on their thermal conductivity: Experimental and molecular dynamic simulation study

High‐entropy rare earth titanates with low thermal conductivity designed by lattice distortion

Investigations on the mechanical and thermal properties of multicomponent dual-phase rare-earth zirconate ceramics

Excellent Magnetocaloric Performance in the Carbide Compounds RE2Cr2C3 (RE = Er, Ho, and Dy) and Their Composites

Preparation and water vapor corrosion behavior of high entropy rare earth disilicate (Y0.25Yb0.25Ho0.25Er0.25) 2Si2O7

Thermal properties of high-entropy RE-disilicates controlled by high throughput composition design and optimization

Structural, magnetic properties and magneto-caloric performances in the antiferromagnetic RECoSi2 (RE = Er and Tm) compounds

High-entropy rare-earth disilicate (Lu0.2Yb0.2Er0.2Tm0.2Sc0.2)2Si2O7: A potential environmental barrier coating material

High-entropy engineering promotes the thermal properties of monosilicates

Crystallographic and thermal expansion properties of rare earth solid solution Er2-xRxMo4O15

Tunable corrosion resistance of rare-earth monosilicate to molten calcia-magnesia-aluminosilicate glass by RE-doping strategy

Pronounced Enhancement of Thermal Expansion Coefficients of Rare-Earth Zirconate by Cerium Doping

A new high entropy rare earth disilicate ceramic (Lu1/8Yb1/8Sc1/8Er1/8Y1/8Ho1/8Dy1/8Tb1/8)2Si2O7: High temperature corrosion of water vapor and molten calcium–magnesium–aluminosilicate (CMAS)