Abstract:With the aim to enhance the phase shift range and bandwidth of the novel Inverted-E topology for single-bit and multi-bit phase shifters, this work proposes a new structure, wherein the Main Transmission Line (MTL) in the Inverted-E topology is replaced by a tunable transmission line with a fixed open circuited stub loaded at its center point. Therefore, offering four design freedoms, precisely the characteristic impedances and electrical lengths of the transmission line and the fixed open circuited stub, that provides it the flexibility to achieve much smaller susceptance values for large phase shifts up to 180°. The required susceptances are realized using three symmetric open or short-circuited stubs, which are loaded to the tunable transmission line using switching p-i-n diodes. The fixed open circuited stubs ensure excellent circuit matching to the port impedance of in the OFF-state, without the need of any additional matching network. Whereas, the enhanced design flexibility enables the realization of compact dimensions and lower insertion loss. A systematic design procedure is developed, supported by detailed design theory and mathematical formulations, followed by validation through analysis and simulations of typical 22.5°, 45°, 90° and 180° digital phase shifters. For experimental verifications, 90° and 180° designs are manufactured at center frequency of 2.4 GHz and a good agreement is observed with theory and simulations. The results indicate compact dimensions of and , corresponding insertion losses of 1.7 dB and 2.85 dB with phase error less than 1° at center frequency. Moreover, the phase variation is observed to be 2° and 5°, in bandwidths of 400 MHz and 100 MHz respectively.

Design of dual‐band filtering phase shifter based on E‐network

29-/35 GHz Dual-band High-Gain Phase Shifter with Hybrid -Networks

An E-band Subradix Active Phase Shifter with < 0.69° RMS Phase Error and 16-Db Attenuation in 28-Nm CMOS

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

An Ultra Broadband Passive Vector Modulator Phase Shifter

Dual-Band Filtering Differential Phase Shifter Using Cascaded Wideband Phase Shifter and Bandstop Network With Two Same Phase Shifts

An 18~30 GHz Vector-Sum Phase Shifter with Two-Stage Transformer-Based Hybrid in 130-Nm SiGe BiCMOS

Hybrid broadband high-precision phase shifter integrated circuit

Synthesis Design of Dual-Band Differential Phase Shifters With Independent Filtering Passbands and Predetermined Phase Shifts

Compact Wideband Phase Shifter Using Microstrip Self-Coupled Line and Broadside-Coupled Microstrip/CPW for Multiphase Feed-Network

Synthesis Design of Wideband Phase Shifters Using Coupled-Line Structure

Inverted-E Type Phase Shifter Using Fixed Stub-Loaded Main Line: Enhanced Bandwidth and Phase Shift Range

Wideband Filtering Differential Phase Shifter With Enhanced Harmonic Suppression

A New Wide-Band 180&#x00b0; Planar Phase Shifter Network

An X-band 22.5°/45° Digital Phase Shifter Based on Switched Filter Networks

Design of wideband 90° phase shifter using compact CRLH structure

A Novel Wideband 90° Filtering Phase Shifter Using Broadside-Coupled MSLs

Synthesis Design of Dual-Band Filtering Power Dividers Based on E-Shape Resonators

Design and Synthesis of Reconfigurable Filtering Phase Shifter Using Optimization of Coupling Matrix

A COMPACT PHASE SHIFTER WITH WIDE PHASE RANGE USING LOADED TRANSMISSION LINE

Design of Ultraflat Phase Shifters Using Multiple Quarter-Wavelength Short-Ended Stubs