Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. Particle-reinforced aluminum-based silicon carbide composites (SiCp/Al) are widely used in aerospace, rail transit, and other fields due to their excellent comprehensive properties. However, the incorporation of high-brittle SiC particles poses challenges in the high-performance processing of SiCp/Al composites. This study focuses on hardened 20 vol% SiCp/Al composites, establishing two-dimensional finite element cutting models for single SiC particles. Micro-grinding experiments are conducted under various processing parameters. The influence law of surface defects on individual SiC particles relative to tool position and single factor machining parameters was analyzed, revealing the micro-grinding mechanisms affecting surface and subsurface quality. The results show that the interaction among particle damage mechanisms, crack propagation directions, and the restraining effects of the Al matrix leads to diverse types of defects at different cutting positions. Both simulation and experimental observations reveal surface defects such as pits, gullies, and burrs, while subsurface damage primarily results from crack invasion, cavity interstices, and pits due to particle breakage. The experiment achieved a minimum roughness of 0.057 μm. Taking into account the thermal softening of the material and the micro-behavior of the tool-chip interface, optimal conditions for improved surface quality involve a grinding depth of 0.03 mm, a spindle speed of 12,000 rpm, and a relatively low feed rate.

Grinding damage mechanisms and wear mechanisms of the new cermet micro-milling cutters

Numerical Investigation of the Evolution of Grit Fracture and Its Impact on Cutting Performance in Single Grit Grinding

Cutting Performance and Wear Mechanism of Submicron and Ultrafine Ti(C, N)-based Cermets

Microstructure design and preparation of cermet tool material based on wear prediction

The material removal and the nanometric surface characteristics formation mechanism of TiC/Ni cermet in ultra-precision grinding

Effect of tool wear on machining quality in milling C f /SiC composites with PCD tool

Cutting Edge Damage in Grinding of Cemented Carbides Micro End Mills

Investigation of Machining and Wear Performance of Various Diamond Micro-Grinding Tools

Study on micro-grinding mechanism and surface quality of hardened 20 vol% SiCp/Al composites

Experimental and Multiscale Numerical Investigation of Wear Mechanism and Cutting Performance of Polycrystalline Diamond Tools in Micro-End Milling of Titanium Alloy Ti-6Al-4V

Study on wear mechanism of milling cutter and hole-making quality in ball helical milling process

Investigation of the wear characteristics of microcrystal alumina abrasive wheels during the ultrasonic vibration-assisted grinding of PTMCs

Influence of cutting parameters on PCD tool wear during milling tungsten carbide

Effects of nano-Al2O3 addition on microstructure, mechanical properties, and wear resistance of Ti(C, N)-based cermets

Material Removal Mechanism of SiC Ceramic by Porous Diamond Grinding Wheel Using Discrete Element Simulation

Wear Characteristics of Micro-Diameter Cutter in High Speed Machining Micro Parts

Investigation on the Tool Wear Suppression Mechanism in Non-Resonant Vibration-Assisted Micro Milling

Cutting performance and wear behavior of diamond, coated cemented carbide and PCBN tools during milling of C f /SiC composites

Experimental and FEM Study of Cutting Mechanism and Damage Behavior of Ceramic Particles in Orthogonal Cutting SiCp/Al Composites

Cutting performance and tool wear mechanism of corrugated helical PCD tool in milling Cf/SiC composites

Wear Characteristics of Micro-Structured CVD Diamond Grinding Tools