Abstract:Emulsification processes are often found in the process industry and their evaluation is crucial for product quality and safety. Numerous methods exist to analyze critical quality attributes (CQA) such as the droplet sizes and droplet size distribution (DSD) of an emulsification process. During the emulsification process, the optical process accessibility may be limited due to high disperse phase content of liquid-liquid systems. To overcome this challenge, a modular, optical measurement flow cell is presented to widen the application window of optical methods in emulsification processes. In this contribution, the channel geometry is subject of optimization to modify the flow characteristics and produce high optical quality. In terms of rapid prototyping, an iterative optimization procedure via SLA-3D printing was used to increase operability. The results demonstrated that the flow cell resulting from the optimization procedure provides a broad observation window for droplet detection.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is that during the emulsification process, due to the high dispersed - phase content, optical access is limited, thus affecting the online measurement and analysis of droplet size and its distribution (DSD). Specifically, the paper focuses on how to improve optical access during the emulsification process by designing a modular optical measurement flow cell, so as to facilitate effective detection and characterization of droplets. This involves the following aspects: 1. **Challenges of optical access**: During the emulsification process, due to the existence of high dispersed - phase content in the liquid - liquid system, optical access may be limited. This limitation will affect the accurate measurement of droplet size and distribution, and further affect product quality and safety. 2. **Limitations of existing methods**: Existing methods for analyzing key quality attributes (such as droplet size and distribution) in the emulsification process often need to be carried out offline, which will lead to inefficient process control based on delayed analysis. Therefore, it is particularly important to develop methods that can monitor droplet characteristics online. 3. **Design of solutions**: In order to overcome the above challenges, the paper proposes a modular optical measurement flow cell optimized by rapid prototyping (using SLA - 3D printing technology). The flow cell aims to improve fluid characteristics by optimizing the channel geometry, thereby improving the optical quality and widening the application window of optical methods. 4. **Specific objectives**: - Design an optical measurement flow cell that can provide a wide observation window for droplet detection. - Improve operability through an iterative optimization process using SLA - 3D printing technology. - Ensure the stability and reliability of the flow cell under different operating conditions, especially in the case of high dispersed - phase content. - Evaluate the performance of different prototypes and select the best design scheme. In summary, the main purpose of this paper is to solve the problem of limited optical access in the emulsification process by designing and optimizing a modular optical measurement flow cell, so as to achieve efficient online monitoring of droplet size and its distribution.

Rapid prototyping of a modular optical flow cell for image-based droplet size measurements in emulsification processes

3d Reconstruction Of Slug Flow In Mini-Channels With A Simple And Low-Cost Optical Sensor

Rapid Prototyping of Soft Lithography Masters for Microfluidic Devices Using Dry Film Photoresist in a Non-Cleanroom Setting

Optical Flow Cell for Measuring Size, Velocity and Composition of Flowing Droplets

Design automation of microfluidic single and double emulsion droplets with machine learning

AI-Based Integrated Smart Process Sensor for Emulsion Control in Industrial Application

Rapid prototyping of a polymer MEMS droplet dispenser by laser-assisted 3D printing

A home-made pipette droplet microfluidics rapid prototyping and training kit for digital PCR, microorganism/cell encapsulation and controlled microgel synthesis

A simple and low-cost fully 3D-printed non-planar emulsion generator

How to Fabricate Robust Microfluidic Systems for a Dollar

Measuring arrangement and size distributions of flowing droplets in microchannels through deep learning

3D Printing in Microfluidics: Experimental Optimization of Droplet Size and Generation Time through Flow Focusing, Phase, and Geometry Variation

A versatile and robust microfluidic device for capillary-sized simple or multiple emulsions production

Connected Droplet Shape Analysis for Nanoflow Quantification in Thin Electroosmotic Micropumps and a Tunable Convex Lens Application

Flexible Toolbox of High-Precision Microfluidic Modules for Versatile Droplet-Based Applications

Photoelectric Sensor for Fast and Low-Priced Determination of Bi- and Triphasic Segmented Slug Flow Parameters

Monofiber optical probe using Doppler signals detection for Drop Size and Velocity measurement in air assisted atomization

Rapid Prototyping of Microfluidic Chips for Use in Droplet Formation and In-Vitro Compartmentalisation

Measuring arrangement and size distributions of flowing droplets in microchannels through deep learning using DropTrack

High-Throughput Production of Micrometer Sized Double Emulsions and Microgel Capsules in Parallelized 3D Printed Microfluidic Devices

Upscaled Production of Satellite-Free Droplets: Step Emulsification with Deterministic Lateral Displacement