Abstract:NiAl base eutectic alloy is an attractive material and promising to use in high temperature environment. However, the inadequate high temperature strength limits its application. In order to improve its strength, Zr was added in the Ti and Hf doped NiAl/Cr(Mo) base eutectic alloys and the effect of Zr addition on microstructure and mechanical properties of the eutectic alloy was investigated in this work. The results show that small addition of Zr can refine the NiAl/Cr(Mo) lamella inside the eutectic cell and optimize NiAl and Cr(Mo) phase morphology in the intercellular zone. Moreover, the Zr addition promotes the precipitation of bulk Heusler phase along eutectic cell boundary. With the increase of Zr addition, the eutectic cell of the alloys becomes fine, but the NiAl and Cr(Mo) phases in the intercellular zone become coarse and the Heusler phases exhibits semi-continuously distribution along the eutectic cell boundary. When the Zr content increases to 1% (atomic fraction), the NiAl and Cr(Mo) phases in eutectic cell and intercellular zone are all coarsened obviously. Additionally, coarse Cr-rich phases precipitate in the intercellular zone and Heusler phase forms the continuous network along eutectic cell boundary. The addition of Zr promotes the precipitation of coarse beta-NiAl and alpha-Cr phase in Cr(Mo) phase and NiAl phases, respectively. Moreover, the segregation of Heusler phase forming elements along the precipitate interface leads to the formation of a large number of interfacial dislocations. In addition, the addition of Zr results in the precipitation of fine Heusler particles in NiAl phase. It is shown that appropriate addition of Zr can improve the compression strength of Ni-33Al-28Cr-5.5Mo-1.0Ti-0.3Hf eutectic alloys significantly at room temperature and high temperature without reducing its compression plasticity, but more addition of Zr reduces the compressive plastic of the alloy inevitably.

Improvement of the strength of ternary eutectic V-Si-B alloys at ambient and high temperatures due to Cr additions

Achieving Enhanced Strength Retention at Elevated Temperatures in Ultrafine-Fibrous Interconnected Al-Ce-Ni Eutectic Alloy Solidified under Super-Gravity Field

Effects of V addition on the solidification microstructures and room temperature compression properties of NiAl–Cr(Mo) hypereutectic alloy

Effects of Cr addition on the constitutive equation and precipitated phases of copper alloy during hot deformation

Experimental Investigation of Phase Equilibria in the Ti-Cr-V System at 1000–1200 °C

Strength properties and enhanced plasticity of intermetallic TiAl(CrSi) alloys

EFFECT OF Zr ADDITION ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF NiAl/Cr(Mo)BASE EUTECTIC ALLOY

First-principles study of the ternary effects on the plasticity of [Formula: see text]-TiAl crystals

Thermally Decomposed Binary Fe–Cr Alloys: Toward a Quantitative Relationship Between Strength and Structure

Towards enhanced elevated-temperature mechanical properties by regulation of eutectic structure in Al-Cu-Si alloys solidified under super-gravity field

Effects of Cr Content on Microstructure and Mechanical Properties of WMoNbTiCr High-Entropy Alloys

The effect of chromium additions on the mechanical properties of Ni-25Al-27.5Fe-based intermetallic compounds

Towards Superior High Temperature Properties in Low Density AlCrFeNiTi Compositionally Complex Alloys

Mechanical Behaviors of Chromium- or Niobium-Modified Ni47.5Al25Fe27.5 Alloy at Elevated Temperature

Phase equilibria thermodynamics and solidified microstructure in the Ag-Cr-Zr system

Analysis of the temperature-dependent plastic deformation of single crystals of quinary, quaternary and ternary equiatomic high- and medium-entropy alloys of the Cr-Mn-Fe-Co-Ni system

Microstructure and mechanical properties of lightweight Al CrNbTiV(x = 0.2, 0.5, 0.8) refractory high entropy alloys

In situ study of non-equilibrium solidification of CoCrFeNi high-entropy alloy and CrFeNi and CoCrNi ternary suballoys

Microstructure evolution and fracture toughness of Nb–Si–Ti based alloy with Cr, Mo and W elements addition

High-temperature Mechanical Properties and Dynamic Recrystallization Mechanism of in situ Silicide-reinforced MoNbTaTiVSi Refractory High-entropy Alloy Composite

Polymorphic transformation and elemental diffusional controlled phase spheroidization of eutectic VNbTiSi medium entropy alloy during heat treatment