Abstract:Li metal is considered as the “Holy Grail” of energy storage systems due to its extremely high theoretical specific capacity (3860 mAh g−1), low gravimetric density (0.59 g cm−3), and lowest negative redox potential (−3.040 V vs. standard hydrogen electrode). The bright prospects give rise to worldwide interests in the metallic Li for the next generation energy storage systems, including highly considered rechargeable metallic Li batteries such as Li-O2 and Li-sulfur (Li–S) batteries. However, the formation of Li dendrites induced by inhomogeneous distribution of current density on the Li metal anode and the concentration gradient of Li ions at the electrolyte/electrode interface is a crucial issue that hinders the practical demonstration of high-energy-density metallic Li batteries. A unique nanostructured anode with Li metal distributed in fibrous Li7B6 matrix is proposed as a promising anode to prevent the dendrite growth. The nanostructured anode is with a large specific area, thus rendering a low current density on the Li metal anode. The dendrite growth is effectively inhibited via decreasing the growth velocity of Li deposits and then limiting the final size of deposited Li on the nanostructured matrix, thus leading to the dendrite-free morphology at macroscale. The concentration gradient of Li ions near the anode surface are sharply reduced, because the 3D Li7B6 fibrous structure provides quantities of free space to accommodate electrolyte. To improve the Coulombic efficiency of Li depositing/dissolution, a dual-phase Li metal anode containing polysulfide-induced SEI and nanostructured graphene framework was investigated for Li-S batteries. Free-standing graphene foam provides several promising features as underneath layer for Li anode, including (1) relative larger surface area than 2D substrates to lower the real specific surface current density and the possibility of dendrite growth, (2) interconnected framework to support and recycle dead Li, and (3) good flexibility to sustain the volume fluctuation during repeated incorporation/extraction of Li. The synergy between the LiNO3 and polysulfides provides the feasibility to the formation of robust SEI in an ether-based electrolyte. The efficient in-situ formed SEI-coated graphene structure allows stable Li metal anode with the cycling Coulombic efficiency of ∼97 % with high safety and efficiency performance, which is with a low resistance of 19.65 Ω (29.10 Ω for Cu foil based Li metal anode) and high ion conductivity of 5.42×10-2 mS cm-1 (2.33×10-2 mS cm-1 for Cu foil based Li metal anode). These results indicated that interfacial engineering of nanostructured electrode were a promising strategy to handle the intrinsic problems of Li metal anodes, thus shed a new light toward LMBs, such as Li-S and Li-O2 batteries with high energy density. Reference [1] X. B. Cheng, H. J. Peng, J. Q. Huang, F. Wei, Q. Zhang, Small 2014, 10, 4257 [2] X. B. Cheng, H. J. Peng, J. Q. Huang, R. Zhang, C. Z. Zhao, Q. Zhang, ACS Nano 2015, 9, 6373

Semi‐Embedded Structured Bi Nanospheres for Boosted Self‐Heating‐Induced Healing of Li‐Dendrites

In Situ Synthesis of a Lithiophilic Ag-Nanoparticles-Decorated 3D Porous Carbon Framework Toward Dendrite-Free Lithium Metal Anodes

Constructing Three-Dimensional Flexible Lithiophilic Scaffolds with Bi 2 O 3 Nanosheets toward Stable Li Metal Anodes

Realizing Holistic Charging–Discharging for Dendrite-Free Lithium Metal Anodes Via Constructing Three-Dimensional Li+ Conductive Networks

Stabilizing Lithium Metal Anode by Molecular Beam Epitaxy Grown Uniform and Ultrathin Bismuth Film

Coupling a Three-Dimensional Nanopillar and Robust Film to Guide Li-Ion Flux for Dendrite-Free Lithium Metal Anodes

Synergistic effect of LixSi/Li3N artificial interface and 3D framework for enabling Dendrite-free, long-life lithium metal anodes

A self-supported hierarchic 3D double skeleton host for highly stable lithium metal batteries

Lithiophilic interface dynamic engineering to inhibit Li dendrite growth for intrinsically safe Li-metal batteries

Highly Reversible Lithium Metal Anode Enabled by 3D Lithiophilic‐Lithiophobic Dual‐Skeletons

General construction of lithiophilic 3D skeleton for dendrite-free lithium metal anode via a versatile MOF-derived route

A Graphene‐Coated Thermal Conductive Separator to Eliminate the Dendrite‐Induced Local Hotspots for Stable Lithium Cycling

Engineering a heteroatom-doped multidimensional carbon network for dendrite-free lithium metal anode

Self-Healing Nucleation Seeds Induced Long-Term Dendrite-Free Lithium Metal Anode

3D Porous and Li-rich Sn–Li Alloy Scaffold with Mixed Ionic-Electronic Conductivity for Dendrite-Free Lithium Metal Anodes

Thermodynamic Regulation of Dendrite-Free Li Plating on Li 3 Bi for Stable Lithium Metal Batteries

Homogeneous electric field and Li+ flux regulation in three-dimensional nanofibrous composite framework for ultra-long-life lithium metal anode

Nanostructured Li Metal Anode to Inhibit Dendrite Growth in Safe Li-Metal Batteries

A Li3Bi/LiF interfacial layer enabling highly stable lithium metal anode

Steady cycling of lithium metal anode enabled by alloying Sn-modified carbon nanofibers

Bimetallic composite induced ultra-stable solid electrolyte interphase for dendrite-free lithium metal anode