Abstract:The development of high-efficiency microwave absorbers for C and X bands still remains a challenge, limiting the settlement of corresponding electromagnetic pollution and radar stealth. In this work, a reduced graphene oxide (RGO)/Cu/Fe3O4 composite is successfully proposed by a one-step solvothermal method with a GO dispersion content of 5 mL, where Fe3O4 exhibits high magnetic loss from natural resonance at the C band, and Cu nanorods and RGO are introduced as dual conductive phases to produce suitable dielectric properties by regulating the percolation threshold. The results show that the existence of Cu nanorods significantly reduces the conductivity and dielectric loss of the composites, optimizing the coordination of attenuation capacity and impedance matching in the C and X bands. Consequently, the obtained RGO/Cu/Fe3O4 composite shows outstanding microwave absorption performance with the maximum effective absorption bandwidth (EAB) value of 5.2 GHz at a thin thickness of 3.1 mm, which covers 84% of the C band and 46% of the X band (4.64–9.84 GHz). The performance is superior to the vast majority of previous absorbers in the corresponding bands.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c10110.N2 adsorption–desorption isotherms of S0, S5, and S10; hysteresis loops of S0, S5, and S10; ε′, ε″, μ′, and μ″ of S5 with different filler loadings; two-dimensional (2D) plots of RL values versus frequency for S5 with filler loadings of 55, 65, and 75 wt %; conductivities of S0, S5, and S10; XRD patterns and SEM images of the samples with different Cu contents; ε″ values and conductivities of the samples with different Cu contents; 2D plots of RL values versus frequency for Cu0, Cu3, and Cu5; curves of the theoretical quarter-wavelength matching thickness (dm), and RL and Z values under given thicknesses from 2.5 to 3.5 mm over 2–18 GHz for Cu0, Cu3, and Cu5 (PDF)This article has not yet been cited by other publications.

Controllable synthesis of flower-like ZnO modified by CuO nanoparticles/N-RGO composites for efficient microwave absorption properties

Desirable microwave absorption performance of ZnFe2O4@ZnO@rGO nanocomposites based on controllable permittivity and permeability

Rational Self-Assembly of Fe3O4 Nanostructures on Reduced Graphene Oxide for Enhanced Microwave Absorption

Mechanical, dielectric, and microwave absorption properties of rGO nanosheets and ZnO filled ZnAl 2 O 4 composites with broad bandwidth and strong absorption

Rational design of ZnO/ZnO nanocrystal-modified rGO foam composites with wide-frequency microwave absorption properties

Microstructure regulation and microwave absorption properties of ZnO/RGO composites

Synthesis of 3D Flower-Like ZnO/ZnCo2O4 Composites with the Heterogeneous Interface for Excellent Electromagnetic Wave Absorption Properties

Three-dimensional reduced graphene oxide foam modified with ZnO nanowires for enhanced microwave absorption properties

Heterogeneous iron-nickel compound/RGO composites with tunable microwave absorption frequency and ultralow filler loading

Heterogeneous iron-nickel compound/RGO composites with tunable microwave absorption frequency and ultralow filler loading.

The lightweight titanium dioxide/reduced graphene oxide composites prepared by hydrothermal method for microwave absorption

Polypyrrole Decorated Flower-like and Rod-like ZnO Composites with Improved Microwave Absorption Performance

A facile fabrication and high-performance electromagnetic microwave absorption of ZnO nanoparticles

Regulating Percolation Threshold via Dual Conductive Phases for High-Efficiency Microwave Absorption Performance in C and X Bands

Tunable Dielectric Performance Derived from the Metal–Organic Framework/Reduced Graphene Oxide Hybrid with Broadband Absorption

Excellent Microwave Absorption Properties Derived from the Synthesis of Hollow Fe3o4@Reduced Graphite Oxide (RGO) Nanocomposites

Simple preparation and microwave absorption of TERGO/ZnO porous composites

Controlled fabrication of core–shell γ-Fe2O3@C–Reduced graphene oxide composites with tunable interfacial structure for highly efficient microwave absorption

Excellent microwave absorbing properties of ZnO/ZnFe2O4/Fe core-shell microrods prepared by a rapid microwave-assisted hydrothermal-chemical vapor decomposition method

Broadband electromagnetic dissipation superiority of hierarchical ZnO flakes co-decorated with CoFe/CoFe2O4 and rGO

Rational design of hierarchical porous Fe3O4/rGO composites with lightweight and high-efficiency microwave absorption