Abstract:The development of high-efficiency microwave absorbers for C and X bands still remains a challenge, limiting the settlement of corresponding electromagnetic pollution and radar stealth. In this work, a reduced graphene oxide (RGO)/Cu/Fe3O4 composite is successfully proposed by a one-step solvothermal method with a GO dispersion content of 5 mL, where Fe3O4 exhibits high magnetic loss from natural resonance at the C band, and Cu nanorods and RGO are introduced as dual conductive phases to produce suitable dielectric properties by regulating the percolation threshold. The results show that the existence of Cu nanorods significantly reduces the conductivity and dielectric loss of the composites, optimizing the coordination of attenuation capacity and impedance matching in the C and X bands. Consequently, the obtained RGO/Cu/Fe3O4 composite shows outstanding microwave absorption performance with the maximum effective absorption bandwidth (EAB) value of 5.2 GHz at a thin thickness of 3.1 mm, which covers 84% of the C band and 46% of the X band (4.64–9.84 GHz). The performance is superior to the vast majority of previous absorbers in the corresponding bands.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c10110.N2 adsorption–desorption isotherms of S0, S5, and S10; hysteresis loops of S0, S5, and S10; ε′, ε″, μ′, and μ″ of S5 with different filler loadings; two-dimensional (2D) plots of RL values versus frequency for S5 with filler loadings of 55, 65, and 75 wt %; conductivities of S0, S5, and S10; XRD patterns and SEM images of the samples with different Cu contents; ε″ values and conductivities of the samples with different Cu contents; 2D plots of RL values versus frequency for Cu0, Cu3, and Cu5; curves of the theoretical quarter-wavelength matching thickness (dm), and RL and Z values under given thicknesses from 2.5 to 3.5 mm over 2–18 GHz for Cu0, Cu3, and Cu5 (PDF)This article has not yet been cited by other publications.

Broadband electromagnetic dissipation superiority of hierarchical ZnO flakes co-decorated with CoFe/CoFe2O4 and rGO

Rational Construction of Hierarchically Porous Fe-Co/N-Doped Carbon/rGO Composites for Broadband Microwave Absorption

Design of MOF-derived hierarchical Co@C@RGO composite with controllable heterogeneous interfaces as a high-efficiency microwave absorbent

Enhanced electromagnetic wave absorption performance of rGO composites modified with atomically dispersed bi-metalic znic/cobalt sites

Rational Self-Assembly of Fe3O4 Nanostructures on Reduced Graphene Oxide for Enhanced Microwave Absorption

Rational design of hierarchical porous Fe3O4/rGO composites with lightweight and high-efficiency microwave absorption

Desirable microwave absorption performance of ZnFe2O4@ZnO@rGO nanocomposites based on controllable permittivity and permeability

Investigation on the broadband electromagnetic wave absorption properties and mechanism of Co3O4-nanosheets/reduced-graphene-oxide composite

Preparation of nitrogen-doped reduced graphene oxide/zinc ferrite@nitrogen-doped carbon composite for broadband and highly efficient electromagnetic wave absorption

Investigation on the Broadband Electromagnetic Wave Absorption Properties and Mechanism of Co 3 O 4 -Nanosheets/reduced-graphene-oxide Composite

Regulating Percolation Threshold via Dual Conductive Phases for High-Efficiency Microwave Absorption Performance in C and X Bands

Three-dimensional reduced graphene oxide foam modified with ZnO nanowires for enhanced microwave absorption properties

Lightweight Chain-Typed Magnetic Fe3O4@rGO Composites with Enhanced Microwave-Absorption Properties

Microstructure regulation and microwave absorption properties of ZnO/RGO composites

Enhanced Electromagnetic Wave Absorption Performance of Co0.5Zn0.5 ZIF-Derived Binary Co/ZnO and RGO Composites

Designing of an rGO-based heterostructure for highly efficient microwave absorption performance and flame retardancy

Fabrication of 1D Ni nanochains@Zn2+ doping polypyrrole/reduced graphene oxide composites for high-performance electromagnetic wave absorption

Ferromagnetic Co20Ni80 Nanoparticles Encapsulated Inside Reduced Graphene Oxide Layers with Superior Microwave Absorption Performance

Rational design of ZnO/ZnO nanocrystal-modified rGO foam composites with wide-frequency microwave absorption properties

Fabrication of nitrogen-doped reduced graphene oxide/cobalt ferrite hybrid nanocomposites as broadband electromagnetic wave absorbers in both X and Ku bands

Achieving High-Efficiency and Broad Bandwidth with Low Filler Loading for Hierarchical Fe3O4/Co-MOF Absorbers