Abstract:Composite materials with high thermal conductivity have the advantages of corrosion resistance, fatigue resistance, easy processing, and electrical insulation and hence are widely used in industries concerned with high heat dissipation, such as aviation, aerospace, and electronics. Adding fillers with high thermal conductivity, such as carbon black, metal particles, carbon fiber, and carbon nanotubes, to rubber matrix materials is recognized as an efficient method to improve the thermal conductivity of the resulting composite materials. However, when single filler is used, the content of the fillers often must be improved to obtain high thermal conductivity, which entails a complicated process and high production cost. In this study, a hybrid filler of spherical aluminum nitride (AlN) and carbon fiber is added to rubber matrix materials. These hybrid filler particles greatly influence the thermal conductivity of the composite materials. To explore the effects of the hybrid fillers on the thermal conductivity of the composite materials, a three-dimensional random representative volume element (RVE) model filled with both spherical AlN and carbon fiber was developed using a random sequential addition method and homogenization theory. The size of the RVE model was 40 μm×40 μm×40 μm. To prevent the formation of "larger fillers" by the aggregation of small fillers, a lower volume fraction of filler was investigated in this study. ANSYS software was used to simulate the influence of the space distribution, volume ratio, and filling fraction of the two fillers on the thermal conductivity of the composite material with hybrid fillers. A steady-state heat conduction model was adopted, and a temperature gradient from 20 to 40°C was applied in the X, Y, and Z directions. The results showed that the thermal conductivity was different in the three directions due to the difference in the orientation of the carbon fibers. It can be seen from the temperature distribution clouds that there are many thermal network paths in the direction of higher thermal conductivity. The average thermal conductivity in all directions could macroscopically characterize the thermal conductivity of the composite materials. Carbon fiber plays a dominant role in the thermal conductivity of the composite material, and the thermal conductivity increases linearly with the ratio of the fillers. When the volume fraction of the carbon fibers is constant, the thermal conductivity of the composite material increases slowly with the increase in the AlN fraction. In comparison, when the volume fraction of AlN is constant, the thermal conductivity of the composite material increases rapidly with the increase of in the carbon fiber fraction. Because of enhanced synergistic effects between the fillers in the matrix, a lower filling fraction of carbon fibers could be used to obtain higher thermal conductivity when designing the structure of composite materials. The results of this study provide a theoretical basis for the preparation of composite materials with high thermal conductivity.

Carbon black: a thermally conductive reinforcement for epoxy based composite

Effects of Carbon Nanotubes and Carbon Fiber Reinforcements on Thermal Conductivity and Ablation Properties of Carbon/phenolic Composites

Improving Thermal Conductivity of Epoxy Resin by Filling Boron Nitride Nanomaterials: A Molecular Dynamics Investigation

Thermal conductive epoxy adhesive composites filled with carbon-based particulate fillers: a comparative study

Impact on mechanical and thermal characteristics of epoxy nanocomposites by waste derived carbon nanotubes, carbon black, and hybrid CNT/FCB reinforcing materials

Mechanical, microstructural, and thermal characterization insights of pyrolyzed carbon black from waste tires reinforced epoxy nanocomposites for coating application

Thermo-Mechanical and Thermo-Electric Properties of a Carbon-Based Epoxy Resin: An Experimental, Statistical, and Numerical Investigation

Acoustical, vibrational, and thermal investigations of pyrolytic carbon black reinforced natural rubber composites

Physical, Thermal Transport, and Compressive Properties of Epoxy Composite Filled with Graphitic- and Ceramic-Based Thermally Conductive Nanofillers

High-Density Polyethylene/Carbon Black Conductive Composites. I. Effect of Cb Surface Modification on Its Resistivity-Temperature Behavior

Influence of polyether ether ketone particles on thermal characteristics of carbon/epoxy composite

Biocarbon reinforced polypropylene composite: An investigation of mechanical and filler behavior through advanced dynamic atomic force microscopy and X-ray micro CT

Thermomechanical and Dielectric Properties Relationship of Hybrid Carbon Black and Nano Silica Epoxy Composites

Effects of spherical fillers reinforcement on the efficacy of thermal conductivity in epoxy and polyester matrices: Experimental validation and prediction using finite element method

Evaluation of mechanical and water absorption properties of kevlar/carbon/basalt fibers reinforced nano cellulose particulates Bisphenol-F LY556 epoxy composite

Enhanced thermomechanical properties of epoxy-multiwalled CNT nano-composites

Tensile and conductivity properties of epoxy composites containing carbon black and graphene nanoplatelets

Influences of Various Thermal Cyclic Behaviours on Thermo Adsorption/Mechanical Characteristics of Epoxy Composite Enriched with Basalt Fiber

Effect of Secondary Carbon Nanofillers on the Electrical, Thermal, and Mechanical Properties of Conductive Hybrid Composites Based on Epoxy Resin and Graphite

Theoretical study on thermal conductivity of epoxy composites doped with boron nitride with multiple dimensions

Thermal conductivity of rubber composite materials with a hybrid AlN/carbon fiber filler