Abstract:A low temperature drift curvature-compensated complementary metal oxide semiconductor (CMOS) bandgap reference is proposed. A dual-differential-pair amplifier was employed to add compensation with a high-order term of TlnT (T is the thermodynamic temperature) to the traditional 1st-order compensated bandgap. To reduce the offset of the amplifier and noise of the bandgap reference, input differential metal oxide semiconductor field-effect transistors (MOSFETs) of large size were used in the amplifier and to keep a low quiescent current, these MOSFETs all work in weak inversion. The voltage reference’s temperature curvature has been further corrected by trimming a switched resistor network. The circuit delivers an output voltage of 3 V with a low dropout regulator (LDO). The chip was fabricated in Taiwan Semiconductor Manufacturing Company (TSMC)’s 0.35-μm CMOS process, and the temperature coefficient (TC) was measured to be only 2.1×10−6/°C over the temperature range of −40–125 °C after trimming. The power supply rejection (PSR) was −100 dB @ DC and the noise was 42 μV (rms) from 0.1 to 10 Hz.

Design of low-voltage bandgap reference using transimpedance amplifier

A High Precision Circuit of Bandgap Voltage Reference

A Low Drift Curvature-Compensated Bandgap Reference with Trimming Resistive Circuit

Design and Realization of a High Precision Low Temperature Coefficient Bandgap Voltage Reference

A bandgap reference circuit with nominal value adjustable

A 1.2 V,9 Ppm/℃ CMOS Bandgap Voltage Reference

A Low Voltage High Precision CMOS Bandgap Reference

A 0.8V CMOS bandgap voltage reference design

Low Supply Bandgap Voltage Reference

A 1V Supply, 81nW, 800mv Bandgap Reference Voltage Circuit for Low Power Devices

Cmos 2.5v Bandgap Voltage Reference

A Simple structure with low temperature drift bandgap voltage reference design

A Subthreshold MOSFET Bandgap Reference with Ultra-Low Power Supply Voltage

CMOS 1.5V Bandgap Voltage Reference

A Precise Curvature Compensated CMOS Bandgap Voltage Reference with Sub 1V Supply

A CMOS Band-Gap Voltage Reference with Low Offset

All-CMOS subbandgap reference circuit operating at low supply voltage

A 1.8 V 0.918 Ppm/°c CMOS Bandgap Voltage Reference with Curvature-Compensated

A CMOS Bandgap Reference with 1V Supply

A high-precision compensated CMOS bandgap voltage reference without resistors

Low-Voltage Bandgap Reference with 0.8 V Power Supply