Abstract:A low temperature drift curvature-compensated complementary metal oxide semiconductor (CMOS) bandgap reference is proposed. A dual-differential-pair amplifier was employed to add compensation with a high-order term of TlnT (T is the thermodynamic temperature) to the traditional 1st-order compensated bandgap. To reduce the offset of the amplifier and noise of the bandgap reference, input differential metal oxide semiconductor field-effect transistors (MOSFETs) of large size were used in the amplifier and to keep a low quiescent current, these MOSFETs all work in weak inversion. The voltage reference’s temperature curvature has been further corrected by trimming a switched resistor network. The circuit delivers an output voltage of 3 V with a low dropout regulator (LDO). The chip was fabricated in Taiwan Semiconductor Manufacturing Company (TSMC)’s 0.35-μm CMOS process, and the temperature coefficient (TC) was measured to be only 2.1×10−6/°C over the temperature range of −40–125 °C after trimming. The power supply rejection (PSR) was −100 dB @ DC and the noise was 42 μV (rms) from 0.1 to 10 Hz.

A CMOS Bandgap Reference with 1V Supply

A Low Drift Curvature-Compensated Bandgap Reference with Trimming Resistive Circuit

A 1.2 V,9 Ppm/℃ CMOS Bandgap Voltage Reference

Super Performance CMOS Band-Gap Voltage Reference

A High Precision Circuit of Bandgap Voltage Reference

A bandgap reference circuit with nominal value adjustable

CMOS 1.5V Bandgap Voltage Reference

A CMOS Bandgap Reference Circuit

All-CMOS subbandgap reference circuit operating at low supply voltage

A Novel CMOS Current Mode Bandgap Reference

A 1V Supply, 81nW, 800mv Bandgap Reference Voltage Circuit for Low Power Devices

A sub-1V CMOS bandgap reference with high-order curvature compensation

Low Supply Bandgap Voltage Reference

A Near-1V 10ppm/℃ CMOS Bandgap Reference with Curvature Compensation

A Precise Curvature Compensated CMOS Bandgap Voltage Reference with Sub 1V Supply

Cmos 2.5v Bandgap Voltage Reference

A 0.8V CMOS bandgap voltage reference design

A sub-1-V ultra-low power full CMOS bandgap reference woking in subthreshold region

A Low Voltage High Precision CMOS Bandgap Reference

A 0.18μm CMOS band-gap voltage reference

Near-1 V 10 ppm/°C CMOS bandgap reference with curvature compensation