Abstract:The most popular anode material in commercial Li-ion batteries is still graphite. However, its low intercalation potential is close to that of lithium, which results in the dendritic growth of lithium at its surface, and the formation of a passivation film that limits the rate capability and may result in safety hazards. High-performance anodes are thus needed. In this context, lithium titanite oxide (LTO) has attracted attention as this anode material has important advantages. Due to its higher lithium intercalation potential (1.55 V vs. Li+/Li), the dendritic deposition of lithium is avoided, and the safety is increased. In addition, LTO is a zero-strain material, as the volume change upon lithiation-delithiation is negligible, which increases the cycle life of the battery. Finally, the diffusion coefficient of Li+ in LTO (2 × 10−8 cm2 s−1) is larger than in graphite, which, added to the fact that the dendritic effect is avoided, increases importantly the rate capability. The LTO anode has two drawbacks. The energy density of the cells equipped with LTO anode is lower compared with the same cells with graphite anode, because the capacity of LTO is limited to 175 mAh g−1, and because of the higher redox potential. The main drawback, however, is the low electrical conductivity (10−13 S cm−1) and ionic conductivity (10−13–10−9 cm2 s−1). Different strategies have been used to address this drawback: nano-structuration of LTO to reduce the path of Li+ ions and electrons inside LTO, ion doping, and incorporation of conductive nanomaterials. The synthesis of LTO with the appropriate structure and the optimized doping and the synthesis of composites incorporating conductive materials is thus the key to achieving high-rate capability. That is why a variety of synthesis recipes have been published on the LTO-based anodes. The progress in the synthesis of LTO-based anodes in recent years is such that LTO is now considered a substitute for graphite in lithium-ion batteries for many applications, including electric cars and energy storage to solve intermittence problems of wind mills and photovoltaic plants. In this review, we examine the different techniques performed to fabricate LTO nanostructures. Details of the synthesis recipes and their relation to electrochemical performance are reported, allowing the extraction of the most powerful synthesis processes in relation to the recent experimental results.

Review on doping strategy in Li4Ti5O12 as an anode material for Lithium-ion batteries

Recent Development in the Rate Performance of Li4Ti5O12

Tailoring Li4Ti5O12 Performance in Li-Ion Batteries with a Focus on Rate Capability: Recent Advances on Ion Doping, Morphology Control, and Composite Formation

Recent Developments in the Doped-Li4Ti5O12 Anode Materials of Lithium-Ion Batteries for Improving the Rate Capability

Fabrication of Li4Ti5O12 (LTO) as Anode Material for Li-Ion Batteries

Preparation and effects of F-doping on electrochemical properties of Li4Ti5O12 as anode material for Li-ion battery

Ca-doped Li4Ti5O12 Nanosphere As a Superior Anode Material for Lithium-ion Batteries

Progress of Li4Ti5O12 anode material for lithium ion batteries

Unveiling the Structure-Activity Relationship of Hollow Spindle-Like Α-Fe2o3 Nanoparticles Via Phosphorus Doping Engineering for Enhanced Lithium Storage

Doping Strategy to Improve the Electrochemical Behavior of Lithium Rich Transition Metal Oxides As Cathodes for Lithium-Ion Batteries

Li4Ti5O12 Spinel Anode: Fundamentals and Advances in Rechargeable Batteries

A comprehensive review study on pure titanium niobium oxide as the anode material for Li-ion batteries

Improving High‐Rate and Long‐Life Cycling of Li4Ti5O12 Anode by Dual Doping of Cd2+ and Ge4+

Computational Modeling of Doped 2D Anode Materials for Lithium-Ion Batteries

Research Progress in Li4Ti5O12 As Anode Material for Li-ion Battery

A review of the Doping Modification of LiFePO4 as a Cathode Material for Lithium Ion Batteries

Surface Doping vs. Bulk Doping of Cathode Materials for Lithium-Ion Batteries: A Review

Effect of Si Doping and Active Carbon Surface Modifications on the Structure and Electrical Performance of Li4Ti5O12 Anode Material for Lithium-Ion Batteries

Nano-structure and characterization of carbon composite with Al3+ and Mn4+ co-doped Li4Ti5O12 as anodes for Li-ion batteries

The Recent Development of Lithium Titanate As Anode Materials for Lithium-Ion Batteries

Unveiling the Synergic Roles of Mg/Zr Co-Doping on Rate Capability and Cycling Stability of Li4Ti5O12