Abstract:A series of polyimide (PI)-based ultraviolet (UV) shielding nanocomposites were prepared with size-controlled polydopamine (PDA) nanoparticles. Two typical sizes of 120 and 200 nm were chosen to mainly investigate the influence of PDA on the structures, thermal stability, mechanical performance, and UV shielding properties of PI nanocomposites. The results revealed that the PI nanocomposites containing 120 nm PDA nanoparticles showed continuously improved mechanical properties with a maximum tensile strength of 94.1 MPa and a maximum elongation at break of 103.6%, respectively, which were 1.33 and 7.50× those of pure PI due to the strong adsorption between the PDA and PI molecules. Meanwhile, the PI nanocomposites with 200 nm PDA nanoparticles exhibited a maximum tensile strength of 78.9 MPa and an elongation at break of 83.5% when the content of PDA was 0.5 wt %. When the content of 200 nm PDA nanoparticles increased to 1 wt %, the PI nanocomposites exhibited a regressive tendency in mechanical properties due to the decrease in the number of adsorption sites and the expanded distance between the PI molecules caused by the increase in the PDA size. UV–vis tests exhibited that the PI nanocomposites were transparent to visible light at low PDA loadings and maintained a superior UV shielding performance and durability, especially for PI nanocomposites with 120 nm PDA nanoparticles, which was ascribed to the absorption of UV light by the PI matrix and PDA filler. Moreover, the PI nanocomposites with smaller PDA nanoparticles had a better thermal stability. The initial degradation temperatures of the PI nanocomposites containing 120 nm PDA were above 510 °C, which endow them the possibility to serve as flexible UV shielding materials in high temperatures and intense UV radiation.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsapm.0c01206?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsapm.0c01206</a>.Materials, characterization, experimental method of the UV shielding measurement, synthetic route of PI/PDA nanocomposites, SEM images, DLS distribution, DSC curves, XPS spectra, liquid disperision diagram of PDA-120 and PDA-200 nanoparticles, XPS spectra survey and FESEM fractographs of PI/PDA nanocomposite films, and thermal and mechanical properties of PI/PDA nanocomposites(<a class="ext-link" href="/doi/suppl/10.1021/acsapm.0c01206/suppl_file/ap0c01206_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Bioinspired construction of size adjustable hollow polydopamine microspheres for ultra-low dielectric polyimide composites

Achieving low dielectric loss and high energy density of polyimide composite dielectric film: inhibiting the formation of conductive path in both macro–microscales

High-Dielectric PVP@PANI/PDMS Composites Fabricated via an Electric Field-Assisted Approach

Polyimides with Low Dielectric Constant and Dissipation Factor at High Frequency Derived from Novel Aromatic Diamine with Bistrifluoromethyl Pendant Groups

Controllable dielectric and electrical performance of polymer composites with novel core/shell-structured conductive particles through biomimetic method

Greatly enhanced thermal conductivity of polyimide composites by polydopamine modification and the 2D-aligned structure

Mussel-Inspired Polydopamine-Enhanced Polyimide for Ultrahigh Toughness and Ultraviolet Shielding Applications

Low-Temperature Synthesis of Polyimide/Poly(Vinylidene Fluoride) Composites with Excellent Dielectric Property

Polyimide–polydimethylsiloxane Copolymers for Low‐dielectric‐constant and Moisture‐resistance Applications

One-step Fabrication of Ultralow Dielectric Polyimide Films Consisting of Size-Controlled Mesoporous Nanoparticles

Preparation and Dielectric Properties of Polymer Composites Incorporated with Polydopamine@Agnps Core-Satellite Particles

Low dielectric polyimide microsphere/polyimide composite films based on porous polyimide microsphere

Mechanically Strong, Transparent Polyimide Composite Thin Films with a Low Dielectric Constant

Preparation of PANI/CuPc/PDMS Composite Elastomer with High Dielectric Constant and Low Modulus Assisted by Electric Fields

Porous polyimide composite films containing mesoporous hollow silica nanospheres with ultralow dielectric constant and dissipation loss

Enhanced dielectric properties of polyimide/BaTiO3 nanocomposite by embedding the polypyrrole@polyimide core-shell nanoparticles

Improved Dielectric Properties of Thermoplastic Polyurethane Elastomer Filled with Core–Shell Structured PDA@TiC Particles

Scalable Fabrication of Lightweight, Heat‐resistant and Controllable Sizes Polyimide Hollow Microspheres

An Ag Decorated P(VDF-CTFE)/BT@HBP@PDA Nanocomposites with Double-Shell Core Structure for High Dielectric Performance

Synthesis and applications of low dielectric polyimide

Chemically crosslinked polyimide-POSS hybrid: A dielectric material with improved dimensional stability and dielectric properties