Abstract:Cellulose nanocrystals (CNCs) are clean and sustainable materials that have drawn significant attention in academia and industry because of their unique physicochemical properties. However, realizing economical and environmentally friendly production of CNCs remains a challenge. In this study, we proposed an innovative strategy to fabricate CNCs, which involves the acid hydrolysis pretreatment of wood cellulose fibers using innocuous and recyclable ferric chloride hexahydrate (FeCl3·6H2O). During the molten FeCl3·6H2O treatment, the degree of polymerization (DP) of the cellulose fibers sharply decreased, along with the transformation of cellulose I to cellulose II crystallites. Molten FeCl3·6H2O quickly hydrolyzed cellulose fibers within 5 min at 80 °C, inducing a rapid decrease in the DP from 922 to 196, and the water-insoluble solid (WIS) retention reached 80.1%. CNCs were successfully produced from the mechanical disintegration of the WIS with a low energy input. Hence, the yield of CNCs is consistent with that of the WIS. Interestingly, the CNCs exhibited typical cellulose II crystallites, which were significantly different from those of the cellulose feedstock (cellulose I). Detailed characterization revealed that the CNCs had tunable number-averaged heights of 10.4–26.9 nm and high thermal stability (a maximal weight loss temperature of 327 °C). Most notably, FeCl3·6H2O was easily recycled from the hydrolysate after hydrolysis, with a high recovery of 94.0–94.5 wt %, using simple concentration and crystallization technologies. Thus, this study proposes a novel production technology for CNCs that is both economical and eco-friendly, providing new ideas for clean and large-scale production of CNCs.

Tailorable cellulose II nanocrystals (CNC II) prepared in mildly acidic lithium bromide trihydrate (MALBTH)

Rod-like and spherical cellulose I and II nanocrystals prepared through acidified lithium bromide molten salt hydrate treatment

Advance Study of Cellulose Nanocrystals Properties and Applications

Preparation of Cellulose Nanocrystals by Synergistic Action of Ionic Liquid and Recyclable Solid Acid under Mild Conditions

Facile Modification and Application of Cellulose Nanocrystals

Acidified ZnCl2 molten salt hydrate systems as hydrolytic media for cellulose I and II nanocrystal production: from rods to spheres

An eco-friendly approach to preparing cellulose nanocrystals by precisely controlling the dissolution of natural cellulose in TBAH/H2O solvent

Cellulose nanocrystals obtained from microcrystalline cellulose by p-toluene sulfonic acid hydrolysis, NaOH and ethylenediamine treatment

Tailoring the Morphology of Cellulose Nanocrystals via Controlled Aggregation

One-pot preparation of hydrophobic cellulose nanocrystals in an ionic liquid

The Simultaneous Production of Two Distinct Types of Cellulose Nanocrystals

Highly Charged Cellulose Nanocrystals via Electrochemical Oxidation

A comprehensive investigation on cellulose nanocrystals with different crystal structures from cotton via an efficient route

Preparation of hairy cationic nanocrystalline cellulose

Optimizing crystal transitions in low-temperature, low-concentration NaOH solutions to prepare cellulose I and II composite materials

Investigation of a Widely Applicable Process for Extracting Carboxyl-rich Cellulose Nanocrystal (CNC)

Thermo-mechano-chemical deconstruction of cellulose for cellulose nanocrystal production by reactive processing

Octadecylamine as chemical modifier for tuned hydrophobicity of surface modified cellulose: toward organophilic cellulose nanocrystals

Cellulose Nanocrystal Preparation via Rapid Hydrolysis of Wood Cellulose Fibers Using Recyclable Molten Ferric Chloride Hexahydrate

Two characteristic cellulose nanocrystals (CNCs) obtained from oxalic acid and sulfuric acid processing

Oxidation with potassium ferrate for the one-pot preparation of carboxylated cellulose II nanocrystals