Abstract:The incidence angle effect causes a decrease in the photogenerated current of photovoltaic (PV) modules when they are subject to incident irradiance at wide angles: Its quantification is challenging and particularly relevant for novel integrated PV applications. This work reports the results of an international interlaboratory comparison conducted within a project team that is currently working at the new edition of the dedicated IEC standard with novel reproducible measurement techniques. The incidence angle effect causes a decrease in the photogenerated current of PV modules when they are subject to incident irradiance at wide angles: Its relevance should be quantified for accurate energy yield purposes and has recently gained significance due to the rising interest in novel integrated PV applications, where vertical or nonoptimal tilt are favored (e.g., in urban structures, in agrivoltaics, and vehicles). The international standard IEC 61853‐2 presents both outdoor and indoor measurement methods: However, the indoor measurement method for commercial‐size modules is often impractical due to irradiance uniformity limitations on the volume spanned by the tested module upon rotation in most of the solar simulators available on the market. In recent years, new solutions have been proposed to overcome these limitations and allow wider adoption of this standard: However, method validations and interlaboratory comparisons have been conducted so far only on small‐area samples, and a real validation on commercial‐size modules is still missing. In this work, we aim at filling this gap, reporting the results of an interlaboratory comparison conducted within the international project team that is currently working at the new edition of IEC 61853‐2. The results show a remarkable agreement between different measurement methods, thus validating more options for the evaluation of this important effect.

Dealing in practice with hot-spots

Hotspots and Performance Evaluation of Crystalline-Silicon and Thin-Film Photovoltaic Modules

Close examination of localized hot spots within photovoltaic modules

Photovoltaic hotspots: a mitigation technique and its thermal cycle

Identifying PV Module Mismatch Faults by a Thermography-Based Temperature Distribution Analysis

Hotspot Diagnosis for Solar Photovoltaic Modules Using a Naive Bayes Classifier

Impact of Meteorological Variations on the Lifetime of Grid-Connected PV Inverters

Interharmonics from Grid-Connected PV Systems: Mechanism and Mitigation

Review of Mismatch Mitigation Techniques for PV Modules

An enhanced global MPPT method to mitigate overheating in PV systems under partial shading conditions

Enhancing Photovoltaic Module Sustainability: Defect Analysis on Partially Repaired Modules from Spanish PV Plants

Data-Driven Detection of Hot Spots in Photovoltaic Energy Systems

Methodology for Calculating the Damaged Surface and Its Relationship with Power Loss in Photovoltaic Modules by Electroluminescence Inspection for Corrective Maintenance

Hot Spot Detection of Photovoltaic Module Based on Distributed Fiber Bragg Grating Sensor

In-Situ Self-Monitoring of Real-Time Photovoltaic Degradation Only Using Maximum Power Point: the Suns-Vmp Method

Photovoltaic module segmentation and thermal analysis tool from thermal images

Research on hot spot risk of high wattage solar modules

Incidence Angle Effect: Validation of New Measurement Methods for IEC 61853‐2

Electrothermal Modeling of Photovoltaic Modules for the Detection of Hot-Spots Caused by Soiling

Optical degradation impact on the spectral performance of photovoltaic technology

Impact of spectral effects on photovoltaic energy production: A case study in the United States