Abstract:The surface temperature retrieval of high-temperature objects shielded by strong diffusive mist plays a critical role in aerospace, metallurgical and many other industries. Traditional radiation temperature measurements under extreme conditions usually cause substantial errors because of the strong extinction and scattering by mist during light propagation. The current infrared temperature retrieval methods often use single-channel or double-channel non-imaging temperature measurement strategies. In such methods, the temperature is corrected using either pre-measured or real-time mist parameters, and the results are analyzed and evaluated according to radiative transfer theory. Based on the calculated spectral radiation characteristics of mist, this paper proposed an infrared imaging temperature measurement method. A temperature retrieval model is also built based on radiative transfer theory while the adjacent effect is considered. The exact surface temperature distribution can be retrieved while the parameters of the diffusive mist medium remain unknown. During a typical temperature retrieval process, the radiative temperature distribution is firstly calculated according to the infrared images in three different channels calibrated by the pre-acquired calibration and emissivity data. Then the exact temperature is retrieved according to this non-linear temperature retrieval model. A three-channel infrared temperature retrieval system is designed, with its three channels centered at 8.8, 10.7, and 12.0 mu m, respectively. Three identical long-wave infrared focal plane detector is applied, which can simultaneously photograph the high-temperature object. Besides, an experimental verification device is assembled to test the performance of the three-channel infrared system based on a high-temperature blackbody and a home-made mist generator. The results prove that long-wave infrared shows a higher interference resistance capacity than mid-wave infrared. This three-channel device and the temperature retrieval model reduce the image distortion caused by mist and show an average temperature retrieval error of ca. 7% at 1 000, 1 100, and 1 200 degrees C conditions. This method is suitable for both high-temperature blackbody and graybody, while the pre-acquisition of the mist parameters is not required. The temperature retrieval method based on multi-spectral infrared imaging proposed in this article shows universal applicability and considerable innovativeness.

Impacts of scattering of non-gray gas particulate mixtures on radiative heat transfer and mid-infrared image temperature in a 2D oxy-coal combustion furnace

Impacts of Cloud Scattering Properties on FY-3D HIRAS Simulations

Image temperature calculation for gas and particle system by the mid-infrared spectrum using DRESOR and SNBCK model

Parametrical Study on Spectral Radiation Characteristics of Solid Fuel Combustion Medium for Energy Cascade Utilization

Examining Asian Dust Refractive Indices for Brightness Temperature Simulations in the 650–1135 Cm−1 Spectral Range

Computational Ghost Imaging in Smoke Media

Theoretical Fast Non-Intrusive 3-D Temperature Distribution Measurement Within Scattering Medium from Flame Emission Image Analysis

On the treatment of scattering for three-dimensional temperature distribution reconstruction accuracy in participating medium

Spectral Radiative Energy and Exergy Analysis of Oxy-Fuel Gaseous Media in One-Dimensional Furnace Cases

Spectral Energy Characteristics of Radiation in Oxy-Coal Combustion for Energy Utilization

Effects of particle concentration and optical thickness on flame temperature field reconstruction

Simultaneous Measurements of Two-Dimensional Temperature and Particle Concentration Distribution from the Image of the Pulverized-Coal Flame

Measurement of Three-Dimensional Temperature Distribution in an Absorbing, Emitting, and Anisotropically Scattering Medium

Experimental investigation on the effects of particulate interference on radiation thermometry

Research on the particle scale gas and solid non-gray thermal radiation transfer

Experimental and theoretical analyses on ignition and surface temperature of dispersed coal particles in O2/N2 and O2/CO2 ambients

Simultaneous Inversion of Particle Size Distribution, Thermal Accommodation Coefficient, and Temperature of In-Flame Soot Aggregates Using Laser-Induced Incandescence

Retrieval of High-Temperature Field under Strong Diffusive Mist Medium Via Multi-Spectral Infrared Imaging

The research on infrared radiation affected by smoke or fog in different environmental temperatures

Research on Simultaneous Reconstruction of the Temperature Distribution of A 3d Participating Medium and Its Boundary

Influence of particle diameter on the scattering characteristics of pre-oxidized coal in THz band