Abstract:In this paper, microstructure evolution, deformation texture and nanoindentation properties of an intermetallic Ti-43Al-9V-0.2Y (at. %) alloy have been investigated after hot rolled in α+β+γ (R#1) and β (R#2) phase field regions. The primary components of sample R#1 are (β+γ) mixture and (α2+γ) lamellar structure. With the temperature increases to 1250 °C, the microstructure of R#2 shows a new characteristic of martensitic α2 and acicular γ phase. And γ phase has different precipitation mechanisms by hot rolling at 1200 °C and 1250 °C. In R#1, γ phase is obtained through three provenances, which are the precipitating from β to form (β+γ) mixture, the precipitating from α phase to form (α2+γ) lamellar structure, and the remnant γ phase during cooling from α+β+γ phase field. However, for R#2, γ phase always nucleates and grows within β matrix. Meanwhile, microstructure evolution of R#2 is discussed. In addition, the increase in rolling temperature also results in a significant change of the fiber texture. Comparing with γ phase, β phase has the stronger texture, which is due to the formation of γ grain along the K-S orientation relationship in β phase. In R#1 state, β phase exhibits a typical {121} <1–11> texture, while γ phase shows {031} <−5-13> and {112} <1–10> texture. Aiming at R#2, β phase displays {010} <100> cube texture, and γ phase has {-215} <5–53> and Goss {110} <001> texture. The hardness (H) and reduced elastic modulus (Er) are investigated by nanoindentation. The (β+γ) mixture structure in R#2 has the highest H (12.63 GPa), whereas the Er is related to the microstructure composition.

Hot working characteristics of a high Nb containing TiAl alloy with (γ+β) microstructure

Flow Behavior and Microstructure Evolution of TB8 Alloy During Hot Deformation Process

Hot Deformation Behavior of a Novel Near-β Titanium Alloy Ti-5.5Mo-6V-7Cr-4Al-2Sn-1Fe in (α+β) Phase Region

Investigation on the Microstructure and Mechanical Behaviors of a Laser Formed Nb-Ti-Al Alloy

Hot Deformation Behavior and Microstructural Evolution of a Novel β-Solidifying Ti-43Al-3Mn-2Nb-0.1Y Alloy

Constitutive Model and Microstructure Evolution of a Novel TG6 High-Temperature Titanium Alloy during Hot Deformation

High temperature deformation behaviors of a high Nb containing TiAl alloy

Microstructure Evolution of the Ti-46Al-8Nb-2.5V Alloy during Hot Compression and Subsequent Annealing at 900 °C

Hot Deformation Behavior and Microstructural Characteristics of Ti–46Al–8Nb Alloy

PART 1-Symposium E-Intermetallics & High Temperature Alloys-Microstructure and Tensile Properties of Hot Worked High Nb Containing TiAl Alloy on Industrial Scale

Microstructure Transformation of a Refined High Nb Containing TiAl Alloy

Hot tensile behavior of a TiAl alloy with a (β0 + γ) microduplex microstructure prepared simply by heat treatments

Thermomechanical characterization and conventional rolling of a novel β-solidifying γ-TiAl alloy with excellent comprehensive properties

Hot deformation behavior and microstructure evolution of a high Nb containing PM TiAl composite reinforced with Ti2AlC particles

Effect of Al content on the hot deformation behavior and microstructure evolution of TiAl-6(Cr, Nb, Ta) alloy

Effect of Nb, Ti microalloying on hot deformation behavior of high strength steel

Effect of Hot Rolling Temperature on Microstructure Evolution, Deformation Texture and Nanoindentation Properties of an Intermetallic Ti-43Al-9V-0.2Y Alloy

The investigation of microstructure evolution, deformation behavior and processing performance of the high niobium containing TiAl alloys

In-situ investigation of β/α transformation in β-solidifying γ-TiAl alloys at different cooling rates

Enhanced Hot Workability of Ti–46Al–4Nb–0.1B Alloy by Introducing Adjustable β Phase via Elemental Powder Metallurgy

Hot Deformation Behaviours and Spheroidization Mechanisms of Ti-5322 Alloy During Hot Compression