Abstract:Over the past few decades, wind energy has expanded to become a widespread, clean, and sustainable energy source. However, integrating offshore wind energy with the onshore AC grids presents many stability and control challenges that hinder the reliability and resilience of AC grids, particularly during faults. To address this issue, current grid codes require offshore wind farms (OWFs) to remain connected during and after faults. This requirement is challenging because, depending on the fault location and power flow direction, DC link over- or under-voltage can occur, potentially leading to the shutdown of converter stations. Therefore, this necessitates the proper understanding of key technical concepts associated with the integration of OWFs. To help fill the gap, this article performs an in-depth investigation of existing alternating current fault ride through (ACFRT) techniques of modular multilevel converter-based high-voltage direct current (MMC-HVDC) for OWFs. These techniques include the use of AC/DC choppers, flywheel energy storage devices (FESDs), power reduction strategies for OWFs, and energy optimization of the MMC. This article covers both scenarios of onshore and offshore AC faults. Given the importance of wind turbines (WTs) in transforming wind energy into mechanical energy, this article also presents an overview of four WT topologies. In addition, this article explores the advanced converter topologies employed in HVDC systems to transform three-phase AC voltages to DC voltages and vice versa at each terminal of the DC link. Finally, this article explores the key stability and control concepts, such as small signal stability and large disturbance stability, followed by future research trends in the development of converter topologies for HVDC transmission such as hybrid HVDC systems, which combine current source converters (CSCs) and voltage source converters (VSCs) and diode rectifier-based HVDC (DR-HVDC) systems.

Completing the Circuit: Integration of Offshore Wind Farms into the Grid using High Voltage dc Technology

Coordinated Optimization of VSC-HVDC Controller Considering DC Line

A High Efficiency High Power Step-Up Resonant Switched-Capacitor Converter for Offshore Wind Energy Systems

Analysis and Comparison of Medium Voltage High Power DC/DC Converters for Offshore Wind Energy Systems

A Novel Concept Of Offshore Wind-Power Collection And Transmission System Based On Cascaded Converter Topology

Grid Integration of Dfig-Based Offshore Wind Farms with Hybrid Hvdc Connection

Review of VSC HVDC connection for offshore wind power integration

Review on DC Transmission Systems for Integrating Large‐scale Offshore Wind Farms

Getting Ready for Multi-Vendor and Multi-Terminal HVDC Technology

The Development of HVDC Transmission System

HVDC Topology Structure Using Existing Ac Cable Lines for Integrating Renewable Energy Sources

HVDC Transmission: Technology Review, Market Trends and Future Outlook

Medium Frequency Diode Rectifier Unit Based HVDC Transmission for Offshore Wind Farm Integration

Evolution of the HVDC Link Connecting Offshore Wind Farms to Onshore Power Systems

A Novel Topology for HVDC Link Connecting to Offshore Wind Farms

A Novel Control Strategy For Offshore Dfig-Based Wind Farm Integrated Through Diode-Rectifier-Based Hvdc Transmission

Achieving Interoperability for Multiterminal Multivendor HVdc Systems: Exploring the Main Challenges

Medium-frequency HVDC Transmission Scheme for Distant Offshore Large-scale Wind Farm Integration

Cascaded H7 Current Source Converter Based Power Transmission System And Fault Analysis

Grid Integration of Offshore Wind Energy: A Review on Fault Ride Through Techniques for MMC-HVDC Systems

Converter for Voltage Source HVDC Links: Current Status and Future Challenges