Abstract:Polymer-based syntactic foams find use in the marine industry as primary structural materials due to their inherent lightweight nature and enhanced mechanical properties relative to pure HDPE. 3-D printing these materials circumvents the use of joining assemblies, enabling the production of complex shapes as standalone structures. Although the quasi-static response of these 3D printed foams has been well studied independently in recent years, their dynamic impact resistance and tolerance as potential core material for sandwich panels have not been the focus. Moreover, 3D printing is known to impart directionality in the printed syntactic foams, which may introduce failure mechanisms typically not observed in molded foams. It is therefore important to investigate the mechanics of 3-D printed syntactic foam core composite sandwich structures under impact loading and characterize their failure mechanisms for establishing dynamic impact resistance. To this end, 3-D printed syntactic foams have been developed using rasters of High-Density Polyethylene (HDPE) and Glass MicroBalloon (GMB) fillers by adopting the Fused Raster Fabrication (FFF) technique. The current study is performed to assess the impact performance of these composite foam cores based on the volume fraction of fillers and print orientation. The weight percentage of GMB fillers in printed specimens ranges from 0% to 60% in increments of 20%. This study presents the impact response of these composite sandwich panels at different energy levels, in compliance with ASTM D7136/D7136M - 20. Observations suggest that an increase in GMB % in HDPE matrix improves the impact performance in terms of the peak load of the material, but the failure behavior becomes brittle to an extent. Observing the failed specimens under a Micro-CT scanner captures the failure morphologies and helps characterize failure processes during impact. It is noticed that core materials with higher GMB content are prone to individual raster breakage and delamination at the back face, in addition to debonding between individual rasters. Specimens printed along the longer dimension (y-direction) impart more warping in the final sandwich structures than that of specimens printed along the shorter dimension (x-direction). Therefore, they are more susceptible to delamination at the back face. Addition of GMB fillers mitigate the tendency of the sandwich panels to warp.

Mechanical performance of stitched foam-filled honeycomb sandwich panels

Quantitative assessment of impact damage in stitched foam‐filled Aluminium honeycomb Sandwich panels by experimental and machine learning methods

Low velocity impact and compression after impact behaviour of polyester pin-reinforced foam filled honeycomb sandwich panels

Effect of energy-absorbing materials on the mechanical behaviour of hybrid FRP honeycomb core sandwich composites

Manufacture of honeycomb core sandwich structures by hybrid approaches: Analysis using lab scale experiments and numerical simulation

Tailoring of mechanical, thermal and vibration behaviour of hybrid fibre with core honeycomb energy-absorbing materials reinforced polymer sandwich laminates

Effects of stitching parameters on the flexural properties of stitched foam core sandwich composites

Experimental and Numerical Studies on Core Stiffened Sandwich Composite Panel

Multi-Cellular 3D Flat-Knitted Composite Panels Strengthened by PU-Foam: Manufacturing, Testing and Simulating

Prediction of peel strength of sandwich sheets made of aluminium alloys fabricated by friction stir spot welding based hybrid process using cohesive zone modeling and finite element simulations

Low-Velocity Impact Behavior of Foam Core Sandwich Panels with Inter-Ply and Intra-Ply Carbon/Kevlar/Epoxy Hybrid Face Sheets

Study on the Mechanical Properties of a Carbon-Fiber/Glass-Fiber Hybrid Foam Sandwich Structure

Experimental research on shear property of foam core sandwich composite panels with enhanced interface

Quasi-static Indentation Responses of FMLs/2.5D Woven Carbon-Fiber Honeycomb Sandwich Structures under Different Structural Parameters

Design, Manufacturing, and Characterization of Hybrid Carbon/Hemp Sandwich Panels

Development of epoxy-based sandwich composite panel with hollow glass microspheres/clay hybrid core and banana fiber facesheet for structural applications

Mechanical Performance of Foam-Filled Lattice Composite Panels in Four-Point Bending: Experimental Investigation and Analytical Modeling

DYNAMIC IMPACT RESISTANCE OF COMPOSITE SANDWICH PANELS WITH 3-D PRINTED POLYMER SYNTACTIC FOAM CORES

Flexural response of concurrently 3D printed sandwich composite

Mechanical properties and damage failure of 3D‐printed continuous carbon fiber‐reinforced composite honeycomb sandwich structures with fiber‐interleaved core

Investigation of the Mechanical Properties of Composite Honeycomb Sandwich Panels after Fatigue in Hygrothermal Environments