Abstract:Polymer-based syntactic foams find use in the marine industry as primary structural materials due to their inherent lightweight nature and enhanced mechanical properties relative to pure HDPE. 3-D printing these materials circumvents the use of joining assemblies, enabling the production of complex shapes as standalone structures. Although the quasi-static response of these 3D printed foams has been well studied independently in recent years, their dynamic impact resistance and tolerance as potential core material for sandwich panels have not been the focus. Moreover, 3D printing is known to impart directionality in the printed syntactic foams, which may introduce failure mechanisms typically not observed in molded foams. It is therefore important to investigate the mechanics of 3-D printed syntactic foam core composite sandwich structures under impact loading and characterize their failure mechanisms for establishing dynamic impact resistance. To this end, 3-D printed syntactic foams have been developed using rasters of High-Density Polyethylene (HDPE) and Glass MicroBalloon (GMB) fillers by adopting the Fused Raster Fabrication (FFF) technique. The current study is performed to assess the impact performance of these composite foam cores based on the volume fraction of fillers and print orientation. The weight percentage of GMB fillers in printed specimens ranges from 0% to 60% in increments of 20%. This study presents the impact response of these composite sandwich panels at different energy levels, in compliance with ASTM D7136/D7136M - 20. Observations suggest that an increase in GMB % in HDPE matrix improves the impact performance in terms of the peak load of the material, but the failure behavior becomes brittle to an extent. Observing the failed specimens under a Micro-CT scanner captures the failure morphologies and helps characterize failure processes during impact. It is noticed that core materials with higher GMB content are prone to individual raster breakage and delamination at the back face, in addition to debonding between individual rasters. Specimens printed along the longer dimension (y-direction) impart more warping in the final sandwich structures than that of specimens printed along the shorter dimension (x-direction). Therefore, they are more susceptible to delamination at the back face. Addition of GMB fillers mitigate the tendency of the sandwich panels to warp.

Design, Manufacturing, and Characterization of Hybrid Carbon/Hemp Sandwich Panels

Effect of energy-absorbing materials on the mechanical behaviour of hybrid FRP honeycomb core sandwich composites

Fabrication and mechanical behaviors of recoverable thermoplastic sandwich structures with circular honeycomb cores based on the continuous approach

Mechanical Properties of Eco-Friendly, Lightweight Flax and Hybrid Basalt/Flax Foam Core Sandwich Panels

An investigation on the mechanical behaviour of sandwich composite structures with circular honeycomb bamboo core

Manufacturing and characterisation of a new thermal pre-stressed carbon fibre-reinforced lattice core for sandwich panels

Edgewise compression mechanisms in sandwich panels with foam-core and jute/glass hybrid composite faces

FRACTURE RESISTANCE OF COMPOSITE STRUCTURS FROM HEMP BIO-FIBERS

Structural Optimization of a High-Performance Green Sandwich Made of Sisal Reinforced Epoxy Facings and Balsa Core

Tailoring of mechanical, thermal and vibration behaviour of hybrid fibre with core honeycomb energy-absorbing materials reinforced polymer sandwich laminates

Development and characterization of hemp/carbon and hemp/glass hybrid and novel functionally graded hybrid composites for structural applications

Mechanical properties and damage failure of 3D‐printed continuous carbon fiber‐reinforced composite honeycomb sandwich structures with fiber‐interleaved core

Development of epoxy-based sandwich composite panel with hollow glass microspheres/clay hybrid core and banana fiber facesheet for structural applications

Sandwich structures of aluminium skins and egg-box-shaped cores made with biobased foam and composites

Flexural and impact response of sandwich panels with Nomex honeycomb core and hybrid fiber composite skins

DYNAMIC IMPACT RESISTANCE OF COMPOSITE SANDWICH PANELS WITH 3-D PRINTED POLYMER SYNTACTIC FOAM CORES

Development of an innovative composite sandwich matting with GFRP facesheets and wood core

Evaluation of the influence of design in the mechanical properties of honeycomb cores used in composite panels

Design, Development, and Characterization of Advanced Textile Structural Hollow Composites

Experimental investigation on 3D printed lightweight sandwich structures for energy absorption aerospace applications

Quantitative assessment of impact damage in stitched foam‐filled Aluminium honeycomb Sandwich panels by experimental and machine learning methods