Performance of a first full-size WOM-based liquid scintillator detector cell as prototype for the SHiP Surrounding Background Tagger
J. Alt,O. Bezshyyko,M. Böhles,A. Brignoli,A. Conaboy,P. Deucher,C. Eckardt,A. Ernst,H. Fischer,A. Hollnagel,M. Jadidi,H. Lacker,F. Lyons,T. Molzberger,S. Ochoa,V. Orlov,A. Reghunath,F. Rehbein,M. Schaaf,C. Scharf,J. Schmidt,M. Schumann,A. Vagts,M. Wurm
DOI: https://doi.org/10.1088/1748-0221/19/05/p05024
2024-05-11
Journal of Instrumentation
Abstract:As a prototype detector for the SHiP Surrounding Background Tagger (SBT), we constructed a cell (120 cm × 80 cm × 25 cm) made from corten steel that is filled with liquid scintillator (LS) composed of linear alkylbenzene (LAB) and 2,5-diphenyloxazole (PPO). The detector is equipped with two Wavelength-shifting Optical Modules (WOMs) for light collection of the primary scintillation photons. Each WOM consists of an acrylic tube that is dip-coated with a wavelength-shifting layer on its surface. Via internal total reflection, the secondary photons emitted by the molecules of the wavelength shifter are guided to a ring-shaped array of 40 silicon photomultipliers (SiPMs) coupled to the WOM for light detection. The granularity of these SiPM arrays provides an innovative method to gain spatial information on the particle crossing point. Several improvements in the detector design significantly increased the light yield with respect to earlier proof-of-principle detectors. We report on the performance of this prototype detector during an exposure to high-energy positrons at the DESY II test beam facility by measuring the collected integrated yield and the signal time-of-arrival in each of the SiPM arrays. The resulting detection efficiency and reconstructed energy deposition of the incident positrons are presented, as well as the spatial and time resolution of the detector. These results are then compared to Monte Carlo simulations.
instruments & instrumentation