Abstract:Many subsea structures have non-uniform geometries, which extend only a finite distance above the seabed. To better understand local scour at these structures, this paper presents scour measurements from an experimental study of submerged compound piles comprised of a circular superstructure supported by a circular foundation. The experiments were conducted in the clear-water regime and considered the effect of three different ratios describing the structural geometry: (i) the overall height of the compound structure above the initial bed level to the diameter of the super-structure <math>h1/D1</math>; (ii) the height of the foundation exposed above the initial bed level relative to the overall height of the superstructure <math>h2/h1</math>; and (iii) the diameter of the foundation to that of the superstructure <math>D2/D1</math>. In all cases <math>D2≥D1</math> and <math>h1≥h2≥0</math> (i.e. the foundation and superstructure where never buried). The experimental results indicate that, if all other parameters are held constant, the non-dimensional equilibrium scour depth <math>S0/D2</math> increases with both <math>h1/D1</math> and <math>h2/h1</math>, and decreases as <math>D2/D1</math> increases. To quantitatively explain these trends the experimental results are compared with a range of existing methods to predict scour depth for non-uniform (or complex) surface piercing piles. Of these methods it is found that an effective pile height and an effective pile diameter, computed using simple geometric arguments, give good agreement. The concept of effective height is also shown to collapse time-scale measurements of the scour process convincingly across the full range of experimental results and to explain the extent and shape of the local scour hole reasonably well. Collectively, these findings suggest that the calculation of an effective height may be used to provide a reasonable first approximation to estimate the rate and extent of local scour around submerged compound structures.

Investigations into Ship Induced Hydrodynamics and Scour in Confined Shipping Channels

Coupled Computational Fluid Dynamics-Discrete Element Method for Simulating the Interactions Between Ship-Induced Waves and Riprap on Restricted Waterway Banks

Effect of Inclination Angles on the Local Scour Around a Submerged Cylinder

Numerical Analysis Impact of Ship Building & Repairing on Surrounding Waters

Impacts of Channel Dredging on Hydrodynamics and Sediment Dynamics in the Main Channels of the Jiaojiang River Estuary in China

Numerical Simulation of Local Scour and Flow Field Around Pipelines

Rans investigation on the hydrodynamic performance of a ship moving obliquely in shallow and narrow channel

Numerical investigation of the scour around a diamond- and square-shaped pile in a narrow channel

Time Development of Scour Around Pile Groups in Tidal Currents

Ship Hydrodynamics of Several Typical Scenes During Inland Waterway Transport

Scour around twin-piles under combined wave–current flows

Numerical Investigation of Oblique Currents' Effects on the Hydrodynamic Characteristics of Ships in Restricted Waters

Numerical Study of Scour below Vibrating Pipelines under Waves and Currents

Study of local scour around rectangular and square subsea caissons under steady current condition

Experimental study of local scour around submerged compound piles in steady current

Numerical investigation of depth-varying currents on ship hydrodynamics in confined water

Near-bed eddy scales and clear-water local scouring around vertical cylinders

SEDIMENT RESUSPENSION AND SEABED SCOUR INDUCED BY SHIP-PROPELLER WASH

Local scour around the monopile: A microscopic perspective using CFD-DEM

Three-Dimensional Numerical Modeling of Pier Scour Under Current and Waves Using Level-Set Method

Alluvial channel hydrodynamics around tandem piers with downward seepage