Abstract:Many subsea structures have non-uniform geometries, which extend only a finite distance above the seabed. To better understand local scour at these structures, this paper presents scour measurements from an experimental study of submerged compound piles comprised of a circular superstructure supported by a circular foundation. The experiments were conducted in the clear-water regime and considered the effect of three different ratios describing the structural geometry: (i) the overall height of the compound structure above the initial bed level to the diameter of the super-structure <math>h1/D1</math>; (ii) the height of the foundation exposed above the initial bed level relative to the overall height of the superstructure <math>h2/h1</math>; and (iii) the diameter of the foundation to that of the superstructure <math>D2/D1</math>. In all cases <math>D2≥D1</math> and <math>h1≥h2≥0</math> (i.e. the foundation and superstructure where never buried). The experimental results indicate that, if all other parameters are held constant, the non-dimensional equilibrium scour depth <math>S0/D2</math> increases with both <math>h1/D1</math> and <math>h2/h1</math>, and decreases as <math>D2/D1</math> increases. To quantitatively explain these trends the experimental results are compared with a range of existing methods to predict scour depth for non-uniform (or complex) surface piercing piles. Of these methods it is found that an effective pile height and an effective pile diameter, computed using simple geometric arguments, give good agreement. The concept of effective height is also shown to collapse time-scale measurements of the scour process convincingly across the full range of experimental results and to explain the extent and shape of the local scour hole reasonably well. Collectively, these findings suggest that the calculation of an effective height may be used to provide a reasonable first approximation to estimate the rate and extent of local scour around submerged compound structures.

Local scour around the monopile: A microscopic perspective using CFD-DEM

Microscopic investigation of shape effect on local scour around the monopile using CFD-DEM

Scour characteristics at the periphery of a vertical pile under steady flow

Effect of Inclination Angles on the Local Scour Around a Submerged Cylinder

Experimental Study on Local Scour Depth around Monopile Foundation in Combined Waves and Current

Full-Scale Numerical Simulation of the Local Scour Under Combined Current and Wave Conditions Based on Field Data

An Innovative Eco-friendly Method for Scour Protection around Monopile Foundation

Experimental Study on Local Scour at the Monopile Foundation of an Offshore Wind Turbine under the Combined Action of Wave–Current–Vibration

A review of scour impacting monopiles for offshore wind

3D Numerical Modeling of Flow and Scour Around a Circular Pile

Local scour characteristics of monopile foundation and scour protection of cement-improved soil in marine environment - Laboratory and site investigation

Local Scour Mechanisms and Prediction Methods Around Offshore Wind Turbine Foundations: Insights and Future Directions

Experimental Investigation on Scour Development and Scour Protection for Offshore Converter Platform

Time Development of Scour Around Pile Groups in Tidal Currents

Numerical Investigation of Local Scour Protection around the Foundation of an Offshore Wind Turbine

Experimental Investigation of Local Scour Around A New Pile-Group Foundation for Offshore Wind Turbines in Bi-Directional Current

Experimental study of local scour around submerged compound piles in steady current

Three-dimensional numerical simulation of wave-induced scour around a pile on a sloping beach

Scour Effects On The Lateral Behavior Of A Large-Diameter Monopile In Soft Clay: Role Of Stress History

Development and prediction of scour around offshore wind turbine monopile foundations in ebb and flow tides

Estimation of local scour around monopile foundations for offshore structures using machine learning models