Complex-Natural-Resonance-Based Design of Chipless RFID Tag for High-Density Data
Reza Rezaiesarlak,Majid Manteghi
DOI: https://doi.org/10.1109/tap.2013.2290998
IF: 5.7
2014-02-01
IEEE Transactions on Antennas and Propagation
Abstract:Each scatterer responds to the incident wave in a unique manner. The backscattered signal from the scatterer is affected by two distinct phenomena: early-time response which emanates from the scattering centers of the scatterer and late-time response which is the summation of the complex natural resonances (CNRs) with some weighting residues. Based on the singularity expansion method (SEM), CNRs are aspect-independent parameters which include some structural information of the scattering target. Based on this fact, the data can be embedded on the RFID tag as CNRs associated to the structural parameters. In this paper, a low-profile chipless RFID tag as a suitable device for high-density data is introduced. By incorporating several slots on the chipless RFID tag, the data can be encoded as CNRs on the structure. The designed RFID tag operates in the frequency band of 3.1–10.6 GHz. The data are decoded in the reader by applying short-time matrix pencil method (STMPM) to the transient backscattered response of the tag. In addition, the turn-on times, damping factors, and resonant frequencies of the poles are distinguished. After studying the effects of various parameters of the tag, a 24-bit tag is designed on the area of 24×24 mm2, simulated and measured. The measurement is performed in the frequency domain and, after applying inverse fast Fourier transform (IFFT), STMPM is employed to extract the signature of the tag. The tag is successfully read remotely via its scattered fields.
telecommunications,engineering, electrical & electronic